Thank you so much. Breliant explanation. I can't wait for the next description for such a useful indicators or tools we have in tradingview. Especially the ones paid user have. For example Volume Profile.
Thank You for a great explanation. Point number 2 says it helps in identifying support and resistance. I could understand how to identify the support, but can it also help in identifying resistance is now clear. Thank You
One question : but like if we draw anchor from different low points the indicator gives different support area ,so like if we want to but which anchor to rely on ?
Hey, Thanks for the great content, When I open my trading view anchored VWAP it has 3 lines, I am a bit confused, do you know why it has 3 lines instead of 1 line.
Mine has 5 because I modified it, I would recommend you have 5 too. However if you still want just one then double tap on VWAP to get to it's settings, go to STYLE TAB and untick both #1 bands (all ticks except the one at the top that says VWAP) Please do support me by a sub if you find this helpful and dont mind subbing. You can disable notification bell, that's fine. Ohh it's a two year old comment. My bad.
Very good video but please raise the mic volume and get a microphone pop gaurd. Getting lots of hiss spikes when using S sounds and isnt pleasant lol. Keep them coming though, thank you!
How do you use it to find short term support and resistance, also how do you know that it that price is not reversing once it goes to the other side of the vwap
What's the practical use, really? I mean the anchored VWAP looks different for every single point in time. Sure you can start it at a dip, but then again you could also start it at an up spike, or somewhere in between, maybe only minutes apart, but the line will look very different every time.
When you’ve applied AVWAP onto your chart. Click on one of the lines. This will than give you a pop up on the top right of the chart. Hit the settings tab and than go into AVWAP style. Than it will list all 3 bands with the Color’s and backround etc. click on the check mark and unselect lower band #1 and Upper band #2. This will leave you with just the one band.
@@Evanarthursm3 Interesting my tradingview has three lines but the #2 upper and lower, #3 upper and lower is checked on by defaut but nothing happens when i check them off. But unchecking upper #1 and lower #1gets rid of the top and bottom line and leaves the one in the middle....am I incorrect? Btw your comment was what i was scouring google and youtube for but couldn't find until I read your comment. 😀
Hi please watch our latest Anchored VWAP video here: ruclips.net/video/K6IbmJtqFK0/видео.html Also keep in mind we do not do strategies, but build the platform for you and other traders or investors to do that. You can also use Pine Script to code your own indicator or strategy. Hope that helps!
@@TradingView i am applying anchord vwap at the lowest point but as soon as i click the lowest point a vertical line is drawn at that point. It is not working as shown in the video.
Absolutely fantastic and thorough breakdown!
You're a fantastic teacher, my man!
You rock!
This video was perfect, thank you so much for this information. This has been the hardest thing to figure out on all charting programs and sites.
Glad it was helpful! We will make more like it soon
Thank you so much. Breliant explanation. I can't wait for the next description for such a useful indicators or tools we have in tradingview.
Especially the ones paid user have. For example Volume Profile.
Glad it was helpful! We will work on Volume Profile next.
Thank You for a great explanation. Point number 2 says it helps in identifying support and resistance. I could understand how to identify the support, but can it also help in identifying resistance is now clear. Thank You
Glad it was helpful! We will make more videos to explain this further.
Thanks. Very nicely explained. Got good clarity on how it works 🎉
Very Very Very good job with explaining vwap.
Very well presented at a learning pace. Well done. I think the problem is "You pick a starting point" renders the tool so subjective it's useless
One question : but like if we draw anchor from different low points the indicator gives different support area ,so like if we want to but which anchor to rely on ?
my question..and what if it was started at a high point? Would it make a difference?
Hi, I cannot find it in the draving panel, trendline tool... it simply miss. what could be the reason i dont have it ? I got a pro TW account
I cant find it either
Thanks for your useful sharing!
great. thanks for explaining in very much detail
Glad you liked it
Hey, Thanks for the great content, When I open my trading view anchored VWAP it has 3 lines, I am a bit confused, do you know why it has 3 lines instead of 1 line.
Mine has 5 because I modified it, I would recommend you have 5 too. However if you still want just one then double tap on VWAP to get to it's settings, go to STYLE TAB and untick both #1 bands (all ticks except the one at the top that says VWAP)
Please do support me by a sub if you find this helpful and dont mind subbing. You can disable notification bell, that's fine.
Ohh it's a two year old comment. My bad.
Very sharp explanation, my man. Thank you.
Glad it was helpful!
@@TradingView How do I get the one line instead of the three with deviations.
sir why is vwap anchored when there is a band on the lower band .why is it suddenly not there sir. hope you can answer
Thanks for clear information
Very good video but please raise the mic volume and get a microphone pop gaurd. Getting lots of hiss spikes when using S sounds and isnt pleasant lol. Keep them coming though, thank you!
Audio so low, can you redo video with louder audio because I am watching on mobile and audio is so low even on highest settings?
Thank you for this feedback! We will improve our mic quality as soon as possible
How do you use it to find short term support and resistance, also how do you know that it that price is not reversing once it goes to the other side of the vwap
Voice is too low...Please improve quality of voice
Thanks for that feedback! We will increase the volume and re-record some of these videos. Appreciate the feedback and keep it coming.
Really nailed it with explanation.
Thank you!
Thank you ! Excellent explanation! however ... that tedious background piano is invading and reducing my attention.
for reversal opportunities, is there an indicator that shows the percent above/below VWAP?
Can u please share how did u decide to select anchoring to 2019 start ,to identify March 2020 support
Would you make one vedio regarding market profile
Where we have to put anchored vwap candle high or candle low or candle open or candle close
This is up to you! You can place it anywhere. Also, please watch our latest Anchored VWAP video here: ruclips.net/video/K6IbmJtqFK0/видео.html
Plz tell me vwap source is open / High/ close / hlc3 / low which source we used in intra day
What's the practical use, really? I mean the anchored VWAP looks different for every single point in time. Sure you can start it at a dip, but then again you could also start it at an up spike, or somewhere in between, maybe only minutes apart, but the line will look very different every time.
Thank you very informative
Glad it was helpful!
would u please do a video about atr> Thanks
What about not anchored vwap? You got a video on that one yet?
We will make that one next!
@@TradingView 😎😎😎😎😎 amazing I’ll be watching and waiting 😁
Nice!!!
Thank you! Cheers!
We get a 3 layer low mid high AVWAP when we throw it on the chart. What is the best way to get it simple one line AVWAP like in this video?
When you’ve applied AVWAP onto your chart. Click on one of the lines. This will than give you a pop up on the top right of the chart. Hit the settings tab and than go into AVWAP style. Than it will list all 3 bands with the Color’s and backround etc. click on the check mark and unselect lower band #1 and Upper band #2. This will leave you with just the one band.
@@Evanarthursm3 Awesome thanks!
@@Evanarthursm3 Interesting my tradingview has three lines but the #2 upper and lower, #3 upper and lower is checked on by defaut but nothing happens when i check them off. But unchecking upper #1 and lower #1gets rid of the top and bottom line and leaves the one in the middle....am I incorrect?
Btw your comment was what i was scouring google and youtube for but couldn't find until I read your comment. 😀
Congratulations on having one of the quietest videos on youtube :/
😂 Please check our recent videos about VWAP and Volume Profiles. Our team used a better microphone: ruclips.net/video/K6IbmJtqFK0/видео.html
Can this be used for commodities also?
It works for any asset class that has volume!
Unable to get Anchored VWAP in trading view chart.
No indicator seen on chart, Kindly help.
We will make a new Achored VWAP video shortly. Stay tuned! It will be on our profile.
Only Vertical line seens on graph, line is not ploting as per the calculations. Please help.
Could you tell us more? What happened exactly?
Good video but it took so long for that brief subject 🤦. Volume is very bad kindly check volume quality before uploading.
We're going to make a new video with better audio! Coming soon
@@TradingView Link?
Can we have anchored vwap intraday strategy?
Hi please watch our latest Anchored VWAP video here: ruclips.net/video/K6IbmJtqFK0/видео.html
Also keep in mind we do not do strategies, but build the platform for you and other traders or investors to do that. You can also use Pine Script to code your own indicator or strategy.
Hope that helps!
Is it advisable for 1/3/5/10 minutes too?
Of course! Just depends on what plan you have
Or how can we use it for intraday strategy?
We'll make another video with some more examples
Back ground music so distracting but learnt a lot
Thanks for this feedback, we will stop using the background music and try videos without it.
@@TradingView I enjoyed it.
How to find multi-year breakout using AVWAP
Do you want to see some examples or specific indicators?
hai coulf verify Nifty 50 and Nifty bank for indian NSE
I am applying it but i am only able to see a vertical line only
Could you tell us more details about what's happening?
@@TradingView i am applying anchord vwap at the lowest point but as soon as i click the lowest point a vertical line is drawn at that point. It is not working as shown in the video.
@@yakshbhut5341 .plz check in future chart.
Too bad you can barely hear the audio even with my system cranked you can barely hear this.
Why don't you reply to comments?
Plz try to make vedio in Hindi
We'll let our team know!
Hall Kevin Martinez Maria Clark Anthony
volume decibel is too low
where's the audio?
It's not working for you? Please try turning it up on your screen and/or making sure you audio is high.
@@TradingView volume is low. Get your video content quality checked before uploading.
Low audio couldn't hear
We will fix this in future videos
can you normalize your audio please? Impossible to hear.
what an audio
We've just posted a new Anchored VWAP video. Please go watch that! The audio is better.
somthing wrong with your Audio!
Now I know not to use this indicator. It does more harm than good.
Bro, work on the volume of this video. it was so bad to listen to the whole video
We just uploaded a new AVWAP video and please go check that out! It has improved volume, it's louder and easier to hear.
Speak faster. Provide actionable info. Like what would I do with this? That was really useless
speak up pablo
THE SOUND IS EXTREMELY WEAK
We have more volume profile videos on our page and we will make more as well with better sound!
AUDIO VERY VERY POOR