Try positive tap products man. Quick and easy to use like scotch locks or t taps whatever you wanna call them and they do nowhere near the damage to to wire and sheathing material. I solder all of my stuff but I've had good luck with the position taps.
There has to be a better way than T taps or even solder. I've never come across a T tap that didn't cut the conductors. Solder isn't always possible, either. Every ignition switch has a plug. Whey can't there be a T adapter for these things to go between the male and female plug of the ignition switch. A bit like the adapters for trailer harnesses under the truck. That's an accessory I'd want to buy.
I know you commented this a long time ago, but now they have some thing called a T harness that does exactly what you said. Just unplug the entire ignition plug, and the immobilizer plug and they basically have a harness that goes in between the male and Female plugs. I came here hoping to find instructions for my kit, and this style of installation would be insanely complicated compared to what they have now.
Sending this back. Your competition has harnesses you can plug in to simply put the module in-line... limiting the soldering and connections to just a few. This set up has you tearing into multiple wiring harnesses, searching for the right wire to connect to. I can’t afford to disable my vehicle due to one missed connection or fault in the module. I’m sending this product back.
I am on my 4th day. Plug & Play harness my butt and no weekend support at all. Should have been a very easy install on my 2004 Silverado as it is a basic work truck, no pwr door locks etc. I got everything working per the LED Light and veh lights but still won't start. I have watched warmcarnow on youtube and others and per those it should start. Pd $180 for a prewired that does not work. Plus it is not MPC but Crimestopper brand. Better off going to their site, but they also do not have weekend support!!!!! UPDATE: Got it to start one time ONLY. Now no go. BTW, I am a electrician plus been a DIYer working on veh for over 40+ yrs. UPDATE: 5th day, still no start, everything shows that it should. Now here is the kicker, start truck with key, click remote key button, pull key from Ing and veh stays running. Can stop either with remote or brake. But remote still won't start veh. Support is far in between. Called about 4 times but never returned call. Emails are 2+ hours in replies or the next day.
@@billy2423 I am sure you have found the solution by now, but I would like to know the answer. was the problem a poor contact with the scotch lock on the starter wire?
@@trin929 They sent me a new INT-SL+ and everything worked great for a good while, then would not start again. Had me check data wiring hookup. Rewired and works fine now, but after I added a small amount electronics solder to that connection
OMG...just baught this for my 2006 Chry Town & Country.Im ASE master tech and a level 4 chry tech of 30 yrs......info is really poor cant even find info to return it
I have this already installed in my car but when I brought the car I did not come with the remote start key fob where can I purchase the remote start key fob ? Thanks
I downloaded the installation instructions for my car from your side and it has a couple of errors in the cables to connect your cables within your own devices and also the cable color does not match with my car so I am returning everything... too bad
Well i m at the shop right I want install my remote start but my car 2011 push button engine also guy told my car it’s 2010 can’t find wire to push button start I want it’s the what’s difference about
Watch "2013-2015 Toyota RAV4 OEM Remote Activated Plug and Play Remote Start with Smart Phone Control" on RUclips ruclips.net/video/9oZXu4UBxts/видео.html
Some car dealers tell vehicle owners that installing an aftermarket part in the vehicle will void the warranty, but that is not true. The Magnuson-Moss Warranty Act prohibits a company from voiding a warranty or denying coverage under the warranty because the owner used or installed an aftermarket part.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Try positive tap products man. Quick and easy to use like scotch locks or t taps whatever you wanna call them and they do nowhere near the damage to to wire and sheathing material. I solder all of my stuff but I've had good luck with the position taps.
There has to be a better way than T taps or even solder. I've never come across a T tap that didn't cut the conductors. Solder isn't always possible, either. Every ignition switch has a plug. Whey can't there be a T adapter for these things to go between the male and female plug of the ignition switch. A bit like the adapters for trailer harnesses under the truck. That's an accessory I'd want to buy.
you arent using the proper size taps then. t taps are the best way and the only way when you have to crank out 6-8 starters in a day
There is and it is called plug & play.
I know you commented this a long time ago, but now they have some thing called a T harness that does exactly what you said. Just unplug the entire ignition plug, and the immobilizer plug and they basically have a harness that goes in between the male and Female plugs. I came here hoping to find instructions for my kit, and this style of installation would be insanely complicated compared to what they have now.
Sending this back. Your competition has harnesses you can plug in to simply put the module in-line... limiting the soldering and connections to just a few. This set up has you tearing into multiple wiring harnesses, searching for the right wire to connect to. I can’t afford to disable my vehicle due to one missed connection or fault in the module. I’m sending this product back.
i feel you ... i been fighting with my dads Toyota for 3 days now the downloadable sheet and all info don't help in anything
what product did you end up using. I have been trying to find the easiest install.
I am on my 4th day. Plug & Play harness my butt and no weekend support at all. Should have been a very easy install on my 2004 Silverado as it is a basic work truck, no pwr door locks etc. I got everything working per the LED Light and veh lights but still won't start. I have watched warmcarnow on youtube and others and per those it should start. Pd $180 for a prewired that does not work. Plus it is not MPC but Crimestopper brand. Better off going to their site, but they also do not have weekend support!!!!! UPDATE: Got it to start one time ONLY. Now no go. BTW, I am a electrician plus been a DIYer working on veh for over 40+ yrs. UPDATE: 5th day, still no start, everything shows that it should. Now here is the kicker, start truck with key, click remote key button, pull key from Ing and veh stays running. Can stop either with remote or brake. But remote still won't start veh. Support is far in between. Called about 4 times but never returned call. Emails are 2+ hours in replies or the next day.
@@billy2423 I am sure you have found the solution by now, but I would like to know the answer. was the problem a poor contact with the scotch lock on the starter wire?
@@trin929 They sent me a new INT-SL+ and everything worked great for a good while, then would not start again. Had me check data wiring hookup. Rewired and works fine now, but after I added a small amount electronics solder to that connection
I didn't get a tip sheet. here can I get this
OMG...just baught this for my 2006 Chry Town & Country.Im ASE master tech and a level 4 chry tech of 30 yrs......info is really poor cant even find info to return it
I have this already installed in my car but when I brought the car I did not come with the remote start key fob where can I purchase the remote start key fob ? Thanks
Now why i am watching this, i just realized that i have to engage my clutch to start my car
wire it in on the power side of the clutch switch, opposite to the brake switch.
Google remote start clutch pedal bypass. It'll work, but never forget to leave the car in neutral with the the parking brake on.
I tried to install on my 2013 Honda Civic but when I remote start, after a few seconds car looks the door and the engine turns off
I mean if I can install the remote start on my Citroen C5 aircross 2019 model
Can I install remote start on a push button start vehicle?
What about your relay connections???
Do you have one that works with a 2016 ford expedition?
You didn’t show the program process
Can do that on Citroen C5 aircross?
No relays needed?
Why does that eco smart honda sound like a jet at startup
I downloaded the installation instructions for my car from your side and it has a couple of errors in the cables to connect your cables within your own devices and also the cable color does not match with my car so I am returning everything... too bad
that's exactly whats happening to me on my dads sienna
@@henrison I go by pin out not colors vehicles change to much.
Wow, that’s one hell of a long sentence !
what is your website, please?
Can this be fit on 2013-2015 RAV4?
this is plug and play??? wtf
Can your systems do smartphone starters too?
What's the link of this actually product model I also have a Civic 2012 and I want to purchase this product
Well i m at the shop right I want install my remote start but my car 2011 push button engine also guy told my car it’s 2010 can’t find wire to push button start I want it’s the what’s difference about
Do you have any video for rav4 2015 how to install the remote control.
Some one can help me with that please
dom19867 you mean Remote Starter? If so i can help I install remote starters on TOYOTA cars
Watch "2013-2015 Toyota RAV4 OEM Remote Activated Plug and Play Remote Start with Smart Phone Control" on RUclips
ruclips.net/video/9oZXu4UBxts/видео.html
how does it perform? distance?
This seems like it should be done by a professional. Too many wires to deal with. I think I’ll stick with the plug and play type by Start-X.
Does this void my cars warranty? Cause I know certain modifications vehicles warranty I drive a 2018 Hyundai Tucson.
Some car dealers tell vehicle owners that installing an aftermarket part in the vehicle will void the warranty, but that is not true. The Magnuson-Moss Warranty Act prohibits a company from voiding a warranty or denying coverage under the warranty because the owner used or installed an aftermarket part.
You don’t have for Kias
Can u please send me your tip chart by mail or whatsapp??
Never ever use any type of connectors. Always strip , solder and tape.
Do you have one that works with a Mazda CX-5 SUV 2015?