The attention to details is just mind blowing. I think you have a unique combination of forward thinking innovation, communication and simplicity that will stand out in the future. I can't wait to see the first flight and the actual flight performances !
The white really looks great too - I'd leave it. At least in places the Caribbean you really end up going light colors everywhere, interior spaces of dark objects (ie, black plastic barrels etc) can become incredibly hot. To the degree you probably have some heat envelope sensitivity light paint is an incredibly easy solution.
Good choice on deferring paint. I flew my Velocity in primer for about 2 years before painting. And I'm glad I did. Made a few fixes and changes that I probably wouldn't have done if it was in paint.
If this has solid crosswind tolerance it will be the perfect cross country machine for someone like me that is a pilot and business owner with satellite offices spread across the country. We aren't big enough yet to justify a company plane, but it will pay for itself by saving me time for our current mission. Super excited to see the flight testing. I'd really love to build this as well. I'm a sucker for a well engineered design, and having followed this project I can say you guys have done a stellar job.
A lancair 320 would be perfect for you now, if you enjoy working on the airplane as well, but I can 100% see the practical aspects of an airplane like this. I cant wait to see it fly
This will handle crosswinds just fine. There is an exponential function of the earths boundary layer, it rapidly becomes nearly zero wind at the surface. The smaller and lower the airplane the less crosswind effects it during rotation and in the flare. It also will land rather fast for most General Aviation type aircraft. Due to wing loading, small wing, short wing chord, low Reynolds Number. Wing loading is your friend in gusting conditions because its less effected by bumps. Speed is your friend in a crosswind because of trigonometry. The faster you go, the lower the crosswind component for any given crosswinds strength and direction.
@@abel4776 I own a specialized service company that contracts with municipalities across the country. There aren't direct flights to my client cities from where I'm located, so it's always a long endeavor to get there.
@@Triple_J.1 Hey don't talk about stuff you clearly don't know anything about. Other aircraft with similar design characteristics have demonstrated crosswind limits of 12-20kts. It's not "12 knots except if you're going fast", it's 12 knots. A high speed landing with high crosswind is a recipe for disaster.
You guys must be very proud, that is an amazing accomplishment! Looking gorgeous, great work on fairing and priming. You guys keep making intelligent choices.
One of the best carbon fiber looks I’ve seen is in the canoes manufactured by Placid Boatworks. They will gel coat parts that will be prone to scrapes and scratches, but the rest is bare carbon fiber BUT with a tinted resin so you get that gorgeous texture but with a brilliant red or green color. Some mix of white gelcoat with exposed tinted CF could look amazing on a plane.
Please consider wrapping, is my unsolicited advice... Great update - In my humble opinion white is the best color for protecting an aircraft or boat from UV ray degradation and reducing radiant heat absorption. I'm thinking one of the best paint schemes could be achieved by wrapping. Gelcoat and clearcoats are tricky to keep from crazing and cracking over time. With new boat manufacturing wraps add a level of protection and are cost effective to repair. Adding cobalt is the activator for making gelcoat hard for all colors including clear. However, over time with production too much cobalt makes the epoxy too brittle and different pigments require different amounts for longevity. Metal fleck requires hard clear gelcoat however I've not seen many aircraft with metal fleck finishes. You can eliminate all that by wrapping with any color scheme you want. I've been using wraps on my personal stuff for years and when I'm wanting to make changes, I simply peel the old wrap off, clean and rewrap. It's amazing how well wraps protect the underlying paint. I use liquid wax formulas I blend on the wraps to add, longevity, depth and slickness. Polymer wax technology is a viable alternative for aerospace coatings. I love spending time on your channel and the stellar creation of DarkAero 1. You guys are leading edge with efficient aviation. Thank you for sharing, guys.
After 32 years in aerospace composites (Sikorsky Blackhawk; Airbus A340,A380;F22; to name a few)best techniques, your young team exhibit all the best engineering I've ever seen. I wish I were nearby enough to be a hands-on craftsman on this project. Real life issues just wouldn't allow that for me. Thanks for your videos, I've followed your entire build, and it's been amazing, entirely. Best of success, congratulations, you're practically there. I totally concur with the *wrap* idea suggested by Will Hubbard.
I believe I'm not the only one that would gladly watch over the entire design and assembling series if you bother to record it, I'd love to have a closer look on how you guys put it all together and how you dealt with the issues and testing
I'm always impressed by the attention to the smallest detail and the design and manufacturing methods chosen with the builder in mind. They say beauty is in the eyes of the beholder in my eyes the aircraft is simply gorgeous. Thanks for the update.
SO fun to watch your processes, and how meticulous you’re being in every step. I get the lighter paint(primer)- straight naked black carbon would create SO much heat fro the pilot and systems at every level. I also appreciate the level of cleanliness in your shop. I strive to use the same mindset, as much as I can with the tasks I perform at my home shop. Keep it up!
You didn't ask me - but IMO I'd paint that ship the brightest color I could stand. It's a prototype - I'd want it so da** bright I could see any crack, flaw, anything from five feet away 🙂 I'd also suggest a dark aircraft that size is going to be very hard to spot in perfect VFR conditions, let alone anything less than perfect. As an outside observer, it's been great watching you guys pull this all together. Stay safe, always check for FOD and all the best!
Highlighter yellow or green?😂 construction 🦺 Jersey orange? 😂. I agree it’s already super hard spotting traffic while flying. A super small and super fast plane would be very hard to see.
How did you size the NACA vents? Is there good software to model flow for them? Also what kind of paint did you choose, I heard the brand but not the type.
Love all the updates, and as a fellow wisconsinite im proud of you guys! Keep it up :D Also are there plans for a 4 seater plane after dark aero hits mass production?
Hi OzanKalan! Thank you for following along! A 4-seater would be a logical next step for us once production gets stable with the DarkAero 1, but we are focused on one airplane at a time for now. ;)
So smooth and so, so few joints, fillets even. I cannot wait to see how the flight tests/aerodynamics are in real life. Primer just makes it look even MORE perfect.
Super smart not going with clear. It’s a gigantic pain. I have a WRC wing that’s just getting painted next time so it doesn’t need to be redone every 5 years.
This is my dream plane. I need a plane to get my wife and myself from California to Iowa, preferably non-stop. I figure this would be roughly 5 hours faster door-to door than the airlines....to go half way across the continent.
Love the Craftsmanship, can’t wait to see her fly. BTW does the new up coming rules for experimental amateur built have any impact on your business model? Hopefully positively?
I mentioned this before. In boat building they sometimes paint the mold with polyurethane paint prior to layup. The paint sticks to the composite material not the mold, obviously.
Thanks for checking out the video! Applying paint in the mold is something we could take advantage of, but we opted to not do this on the DarkAero 1 mainly for structural and quality inspection reasons. Paint obscures visual inspection on the mold face of the infused part after we demold it and inspect it for any dry spots. This inspection step is pretty critical for structural parts like the wing skins. There are other inspection methods like ultrasound that allow you to "see through" paint, but they are not as good as having the ability to simply visually inspect everything. The other reason we don't apply paint in the molds is that it would interfere with bonding airframe sections together since we have lap joint jogs molded right into the parts. Of course, there are ways around this too like masking off the bond areas of the mold or sanding the paint off of lap joints, but that probably adds more effort than just painting the whole airframe in a single operation.
Honestly I think exposed carbon is overdone these days especially in cars. I’m a fan of a nice paint scheme with a little carbon accenting. Enjoying your vids for the work and process going into this. I have a dream to make a carbon tub sports car but I don’t think I’ll pursue it.
Yes I fix broken carbon fibre bicycles and the carbon fibre look is overrated. My art teacher always said black is not a colour but the absence of light. Bring the colour on and let the light shine.
I build a few acoustic guitars with carbon fiber, and appreciate the *light effect* that displays the deep, wet-look of the weave, yet I prefer a a little bit of logo/graphics/color accents to make the visual appearance really POP! The sound is the _real signature_, though..
Do you think the seam on the fuselage will end up cracking the paint later on after flying for a bit? I guess we will find out? Just curious if you have considered that possibility.
Hey Riley! We don’t anticipate seeing cracks along fuselage joints because the primer is pretty flexible. The PPG rep at AirVenture showed us a demo using an inflated balloon coated with their material that could be squeezed and flexed without any cracking issues. That said, we will see if flying the airplane reveals anything.
What a beautiful machine! I assume 'production' will be for EAB kits? Curious how something as involved as a carbon fiber composite monocoque airframe and the 51% rule go together.
From my understanding, it's 51% of tasks must be completed. And there of course is a limit to this, you wouldn't consider mining or smelting the aluminum used in a sheet as a task. I wouldn't be too worried, there is still plenty of work needed on the builder's end.
I don’t have much to say other than this looks like a very fun airplane to fly and I want one. If it’s half as fast as it looks, you’re all in for a huge success.
Didn't think it could look better, but here it is! I wonder: would there be anything to gain from building the fuselage differently (eg. monocoque instead of assembly)? Barring sheer cost, of course.
Beautiful bird!!! can't wait to see test flights! On the clear coat, have you tested "Glasurit - Carbon Fiber system", then finished with ceramic coat. - not sure if it is aerospace certified, but the stuff is fantastic.
I would take a look around the boating segment if you plan to go this route. There are many boats which have exposed clear coated carbon fiber as a structural element
Guys painting the Aircraft is the right ✅️ thing 2 do . Perhaps leaving some areas underneath the Dark Aerio in Carbon would be a nice touch where the 🌞 ☀️ 🌤 doesn't get 2 it . Maybe a Competition 4 color scheme ? Love the Bubble Cockpit . Xcellent
Love the concept and your engineering excellence. Just a minor thought. I don’t see protection of the rudders in the event of a tail strike during take off or in the shop. Shaping the bottom of the rudders or a skid would do the job. Again congratulations on a magnificent achievement. Eager to see it fly but respect your patience in ensuring that first all is right.
You guys works are very thorough, as far as engineering is concern. I have being following you since the begining and never disapointed in what I see, I am an inovator too, have you conscidered designing your craft arround a new technology of combustion engine that does not have crankshaft nor piston, this engine has change how combustion engine is, I am priviledge to see it... let me know what you think, one of the objective in the design of the said engine is to reduce weight size and increase efficiency close to electric motor efficiency.. and the amazin thing about this engine is it can be scale up or down at will and you can reduce power or increase power...
Great set of videos that your are doing - really like them. However, one question: - why didn't you mount the fuselage on a rotisserie as they do in the motor vehicle rebuilds? It would have made things a bit easier for access.
Please don't go with the tired stripes at different angles theme that you see on every airplane and RV on the planet. This deserves better, graphic, instantly recognizable as DA.
This is coming along so well.
You guys' professionalism shows through in spades. Can't wait to see it fly. :-)
Can't wait to accept a shipment full of beautiful carbon parts I can arrange in my workspace and make airplane noises with.
@@sl66ggehrubt c6
The attention to details is just mind blowing. I think you have a unique combination of forward thinking innovation, communication and simplicity that will stand out in the future. I can't wait to see the first flight and the actual flight performances !
The white really looks great too - I'd leave it. At least in places the Caribbean you really end up going light colors everywhere, interior spaces of dark objects (ie, black plastic barrels etc) can become incredibly hot. To the degree you probably have some heat envelope sensitivity light paint is an incredibly easy solution.
I agree, it looks like apple made a plane 😍
Good choice on deferring paint. I flew my Velocity in primer for about 2 years before painting. And I'm glad I did. Made a few fixes and changes that I probably wouldn't have done if it was in paint.
Getting close! And it looks amazing. I’m super excited for y’all!!!
This story warms the heart, and the result is progressively more and more amazing. You guys are awesome. Thanks for sharing!
If this has solid crosswind tolerance it will be the perfect cross country machine for someone like me that is a pilot and business owner with satellite offices spread across the country. We aren't big enough yet to justify a company plane, but it will pay for itself by saving me time for our current mission. Super excited to see the flight testing. I'd really love to build this as well. I'm a sucker for a well engineered design, and having followed this project I can say you guys have done a stellar job.
A lancair 320 would be perfect for you now, if you enjoy working on the airplane as well, but I can 100% see the practical aspects of an airplane like this. I cant wait to see it fly
This will handle crosswinds just fine.
There is an exponential function of the earths boundary layer, it rapidly becomes nearly zero wind at the surface. The smaller and lower the airplane the less crosswind effects it during rotation and in the flare.
It also will land rather fast for most General Aviation type aircraft. Due to wing loading, small wing, short wing chord, low Reynolds Number. Wing loading is your friend in gusting conditions because its less effected by bumps. Speed is your friend in a crosswind because of trigonometry. The faster you go, the lower the crosswind component for any given crosswinds strength and direction.
@@abel4776 I own a specialized service company that contracts with municipalities across the country. There aren't direct flights to my client cities from where I'm located, so it's always a long endeavor to get there.
@@abel4776 you'd think so...honestly, at a certain point, it becomes quite routine - especially if YOU'RE the pilot.
@@Triple_J.1 Hey don't talk about stuff you clearly don't know anything about. Other aircraft with similar design characteristics have demonstrated crosswind limits of 12-20kts. It's not "12 knots except if you're going fast", it's 12 knots. A high speed landing with high crosswind is a recipe for disaster.
Can't wait to see this fly and hear about your testing process. Good luck in the final stages!
You guys must be very proud, that is an amazing accomplishment! Looking gorgeous, great work on fairing and priming. You guys keep making intelligent choices.
One of the best carbon fiber looks I’ve seen is in the canoes manufactured by Placid Boatworks. They will gel coat parts that will be prone to scrapes and scratches, but the rest is bare carbon fiber BUT with a tinted resin so you get that gorgeous texture but with a brilliant red or green color. Some mix of white gelcoat with exposed tinted CF could look amazing on a plane.
100%
Please consider wrapping, is my unsolicited advice... Great update - In my humble opinion white is the best color for protecting an aircraft or boat from UV ray degradation and reducing radiant heat absorption. I'm thinking one of the best paint schemes could be achieved by wrapping. Gelcoat and clearcoats are tricky to keep from crazing and cracking over time. With new boat manufacturing wraps add a level of protection and are cost effective to repair. Adding cobalt is the activator for making gelcoat hard for all colors including clear. However, over time with production too much cobalt makes the epoxy too brittle and different pigments require different amounts for longevity. Metal fleck requires hard clear gelcoat however I've not seen many aircraft with metal fleck finishes. You can eliminate all that by wrapping with any color scheme you want. I've been using wraps on my personal stuff for years and when I'm wanting to make changes, I simply peel the old wrap off, clean and rewrap. It's amazing how well wraps protect the underlying paint. I use liquid wax formulas I blend on the wraps to add, longevity, depth and slickness. Polymer wax technology is a viable alternative for aerospace coatings. I love spending time on your channel and the stellar creation of DarkAero 1. You guys are leading edge with efficient aviation. Thank you for sharing, guys.
Will Hibbard II, I agree completely.
After 32 years in aerospace composites (Sikorsky Blackhawk; Airbus A340,A380;F22; to name a few)best techniques, your young team exhibit all the best engineering I've ever seen. I wish I were nearby enough to be a hands-on craftsman on this project.
Real life issues just wouldn't allow that for me. Thanks for your videos, I've followed your entire build, and it's been amazing, entirely.
Best of success, congratulations, you're practically there.
I totally concur with the *wrap* idea suggested by Will Hubbard.
Agreed! Slightly more weight but better cleaner easier outcome.
Mike Fitzgerald Calgary Canada 🇨🇦
Sanno!!! Gorgeous airplane, great lines, superfit construction.
I believe I'm not the only one that would gladly watch over the entire design and assembling series if you bother to record it, I'd love to have a closer look on how you guys put it all together and how you dealt with the issues and testing
Looking awesome, love the paint scheme. Can’t wait to see it fly.
Thanks for the answer to the clear coat question! Your diligence is fun to watch.
I'm always impressed by the attention to the smallest detail and the design and manufacturing methods chosen with the builder in mind. They say beauty is in the eyes of the beholder in my eyes the aircraft is simply gorgeous. Thanks for the update.
It’s a beauty! I wish you great success with this project.
Looking good guys! keep up the good work, I can't wait to see them fly!
Honestly looks amazing just in light grey as it is!
Thanks Elwin! The new look is growing on us as well.
Amazing build. Love the final paint scheme. It's perfect.
Absolutely gorgeous guys!!! Cannot wait for its first flight!
Love this channel, great content. Love the physics/maths explanations.
SO fun to watch your processes, and how meticulous you’re being in every step. I get the lighter paint(primer)- straight naked black carbon would create SO much heat fro the pilot and systems at every level. I also appreciate the level of cleanliness in your shop. I strive to use the same mindset, as much as I can with the tasks I perform at my home shop. Keep it up!
You didn't ask me - but IMO I'd paint that ship the brightest color I could stand. It's a prototype - I'd want it so da** bright I could see any crack, flaw, anything from five feet away 🙂 I'd also suggest a dark aircraft that size is going to be very hard to spot in perfect VFR conditions, let alone anything less than perfect. As an outside observer, it's been great watching you guys pull this all together. Stay safe, always check for FOD and all the best!
Highlighter yellow or green?😂 construction 🦺 Jersey orange? 😂. I agree it’s already super hard spotting traffic while flying. A super small and super fast plane would be very hard to see.
On my 82” TV (via cast from iPhone), this ‘paint’ looks like satin white. And it looks way cool to me.
How did you size the NACA vents? Is there good software to model flow for them? Also what kind of paint did you choose, I heard the brand but not the type.
Love all the updates, and as a fellow wisconsinite im proud of you guys! Keep it up :D
Also are there plans for a 4 seater plane after dark aero hits mass production?
Hi OzanKalan! Thank you for following along! A 4-seater would be a logical next step for us once production gets stable with the DarkAero 1, but we are focused on one airplane at a time for now. ;)
@@DarkAeroInc Do you think y'all would ever make a tandem version of the 2 seater also?
@@DarkAeroInc just build a notebook with ideas for the next version while you focus on the current one.
So smooth and so, so few joints, fillets even. I cannot wait to see how the flight tests/aerodynamics are in real life. Primer just makes it look even MORE perfect.
Looks SOOOO MUCH BETTER with a white paint job..this plane is awesome
Super smart not going with clear. It’s a gigantic pain. I have a WRC wing that’s just getting painted next time so it doesn’t need to be redone every 5 years.
Beautiful work!
This is my dream plane. I need a plane to get my wife and myself from California to Iowa, preferably non-stop. I figure this would be roughly 5 hours faster door-to door than the airlines....to go half way across the continent.
Beauty and precision, nice work!
Love the Craftsmanship, can’t wait to see her fly. BTW does the new up coming rules for experimental amateur built have any impact on your business model? Hopefully positively?
BrightWhiteAero. Can`t wait to see the first flight. Good luck guys!!!
I mentioned this before. In boat building they sometimes paint the mold with polyurethane paint prior to layup. The paint sticks to the composite material not the mold, obviously.
Thanks for checking out the video! Applying paint in the mold is something we could take advantage of, but we opted to not do this on the DarkAero 1 mainly for structural and quality inspection reasons. Paint obscures visual inspection on the mold face of the infused part after we demold it and inspect it for any dry spots. This inspection step is pretty critical for structural parts like the wing skins. There are other inspection methods like ultrasound that allow you to "see through" paint, but they are not as good as having the ability to simply visually inspect everything. The other reason we don't apply paint in the molds is that it would interfere with bonding airframe sections together since we have lap joint jogs molded right into the parts. Of course, there are ways around this too like masking off the bond areas of the mold or sanding the paint off of lap joints, but that probably adds more effort than just painting the whole airframe in a single operation.
@@DarkAeroInc thanks for the detailed reply, which makes sense!
So the "Aero" is not that "Dark". Isn't it? 😁I'll see myself out...
Fascinating series. Looking forward to flight videos and data.
That finished paint render is very sexy!
My favorite notification..... a new video from Dark Aero
Honestly I think exposed carbon is overdone these days especially in cars. I’m a fan of a nice paint scheme with a little carbon accenting. Enjoying your vids for the work and process going into this. I have a dream to make a carbon tub sports car but I don’t think I’ll pursue it.
Yes I fix broken carbon fibre bicycles and the carbon fibre look is overrated. My art teacher always said black is not a colour but the absence of light. Bring the colour on and let the light shine.
I build a few acoustic guitars with carbon fiber, and appreciate the *light effect* that displays the deep, wet-look of the weave, yet I prefer a
a little bit of logo/graphics/color accents to make the visual appearance really POP!
The sound is the _real signature_, though..
beautiful plane and professionally done. Nice!
Do you think the seam on the fuselage will end up cracking the paint later on after flying for a bit? I guess we will find out? Just curious if you have considered that possibility.
If they do get a paint crack on any glued CF seam they will have a much more serious problem with the carbon fibre.
Hey Riley! We don’t anticipate seeing cracks along fuselage joints because the primer is pretty flexible. The PPG rep at AirVenture showed us a demo using an inflated balloon coated with their material that could be squeezed and flexed without any cracking issues. That said, we will see if flying the airplane reveals anything.
Top work guys, you’ve created something amazing.
The paint is absolutely gorgeous
What a beautiful machine! I assume 'production' will be for EAB kits? Curious how something as involved as a carbon fiber composite monocoque airframe and the 51% rule go together.
From my understanding, it's 51% of tasks must be completed. And there of course is a limit to this, you wouldn't consider mining or smelting the aluminum used in a sheet as a task.
I wouldn't be too worried, there is still plenty of work needed on the builder's end.
I don’t have much to say other than this looks like a very fun airplane to fly and I want one. If it’s half as fast as it looks, you’re all in for a huge success.
Your team inspires me to learn and do more in life. Thank you.
Nice! I was expecting some news, since it’s been a while! Great job!
WE LOVE THE PASSION! One day I will own and fly a DarkAero1
Looking SWEET. Can’t wait to see test flight
Gorgeous process. Love following!
I don't plan to ever make a DarkAero or any other kitplane but it's always fun to see these updates.
Awesome as usual! Amazing work
Didn't think it could look better, but here it is! I wonder: would there be anything to gain from building the fuselage differently (eg. monocoque instead of assembly)? Barring sheer cost, of course.
Light Aero1 looking good!
No debate on the paint scheme. The one shown is money 💸. Lock it in, that’s winner. Beautiful!
High quality content as always
Looks Epic.
Keep it Up.
So many companies fail when they start out under-capitalized, under-brained, and under-skilled. Happy to see this is not the case with DarkAero.
WOW thats GORGEOUS 😍
Incredible work. I’m speechless
That is a beautiful air frame
Always stoked to see a new video
what type of paint did you use??
Beautiful bird!!! can't wait to see test flights! On the clear coat, have you tested "Glasurit - Carbon Fiber system", then finished with ceramic coat. - not sure if it is aerospace certified, but the stuff is fantastic.
Impressive professionalism and discipline. Remarkable brother-team! Best wishes as you move toward flight testing!
Soooooooooooooo dope.. Thought i was gonna miss the bare carbon, but it looks sick...
Love it! Would love to see a model available for MSFS
How much does UV bounce off pavement? I once heard that UV protection only on top wasn't enough.
I would take a look around the boating segment if you plan to go this route. There are many boats which have exposed clear coated carbon fiber as a structural element
You mention testing, here's a good quote from Wernher von Braun: “One good test is worth a thousand expert opinions.”
Nice!
Can't wait to see it fly
Guys painting the Aircraft is the right ✅️ thing 2 do . Perhaps leaving some areas underneath the Dark Aerio in Carbon would be a nice touch where the 🌞 ☀️ 🌤 doesn't get 2 it .
Maybe a Competition 4 color scheme ?
Love the Bubble Cockpit . Xcellent
Not far to go now before she takes to the skies, can't wait to see it!
Love the concept and your engineering excellence.
Just a minor thought. I don’t see protection of the rudders in the event of a tail strike during take off or in the shop. Shaping the bottom of the rudders or a skid would do the job.
Again congratulations on a magnificent achievement. Eager to see it fly but respect your patience in ensuring that first all is right.
You should upload way more videos
im also hungry for this kinda stuff, i bet these guys are really busy behind the scenes
Just clear over the primer that thing looks frickin sleek
Really impressive seeing just two guys lift and rotate the airframe like it was a sofa.
You guys works are very thorough, as far as engineering is concern. I have being following you since the begining and never disapointed in what I see, I am an inovator too, have you conscidered designing your craft arround a new technology of combustion engine that does not have crankshaft nor piston, this engine has change how combustion engine is, I am priviledge to see it... let me know what you think, one of the objective in the design of the said engine is to reduce weight size and increase efficiency close to electric motor efficiency.. and the amazin thing about this engine is it can be scale up or down at will and you can reduce power or increase power...
Yes, paint it! Plenty of videos on the structure.
Sweet looking Aircraft !!!
Great set of videos that your are doing - really like them.
However, one question: - why didn't you mount the fuselage on a rotisserie as they do in the motor vehicle rebuilds?
It would have made things a bit easier for access.
Looking great … 😊
That's ok you want it to be painted white anyway so you can be seen, and not have a mid-air. Great work guys!
Whit the cad you use. They have a dedicated composite suite? For design, the parts layer by layer. If not, how do you make the layup drawings?
Stoked to see it take flight
looks very good
Well, guess you gotta change the name to BrightAero now.
Please don't go with the tired stripes at different angles theme that you see on every airplane and RV on the planet. This deserves better, graphic, instantly recognizable as DA.
White with some design colors I believe is the best look for aircraft in my opinion.
Love this thing ♥️
Just curious why you taped off the entire canopy instead of taping the plastic at the edges.
Looks awesome!
We taped the entire canopy because paint gets everywhere! It's easier to clean up tape than to clean up paint accidents.
They make a clearcoat for water towers... check that stuff out.
Dear Brothers. Thanks for the info and Peace Be With You with Three
1:48 what if you replace white with red? That would look pretty cool.
Also, as a Boeing AOG mechanic, who does a lot of 787 repairs and mods, we both know the UV exposure to the carbon is detrimental. Keep it up.
Can you guys give an update on that custom antenna (on the back of the cockpit)?
Beautiful machine