78 Mach3 Motor Tuning CNC router
HTML-код
- Опубликовано: 2 фев 2025
- 78 A basic tutorial Configuring Mach3, motor and axes tuning.
Disclaimer:
These videos and commentary are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.
I love the background music. Thanks for this video.
cant see detail on your screen. also columns 4 and 5, all red Xs why?
we can cut the square part for the test. and calibrate accordingly by checking actual distance with vernier.
After changing the motor tuning settings, I save and exit the menu, turn off and on mach3 again. When I look at the motor tuning values, I see the values I saved, but when I call the g code file and start processing, I see that the engine tuning values change automatically and return to the initial values. I would appreciate it if you could help me find out why this problem occurs.
What AndthecorrectAnswerls said.... but if you dont know any other way your method would work. Start with 50mm as you did then repeat but go 300mm - 400mm if your machine has that travel. The greater the distance the greater error and easier to tune using your method without the calibration tool you had.
I saw little point in doing another auto calibrate for .5mm when you weren't even holding the vernier gauge at a right angle to the bit and your starting point was roughly by eye - but it was good to see how effective Mach3 is and that you wised up and graduated to a dial.
I have Problem pmw bumped Minimum settings spindle dont Spin can any help me
can you help me? i bought cnc machine with mah3, spindle is 2.2kw....where can i see haw fast my cnc can go?
my job work cant after 2 hour stop machine automatic in mach3 why
Habe ein Problem mit der Z-Achse wenn ich 10mm eingebe fährt sie nur 8mm hat das was auch mit Kalibrierung zu tun oder gibt's da andere Ursachen
Hi, see my videos 197 and 198
Good info as usual 👍🏻
thank you for this video. My X axis is vibrating when is on 25% speed (300mm/min), on other speeds looks good. Do you think my motors are not tunned or I got another issue?
Hi, redo your motor tuning ( see my video 245 )
@@rogerwebb9600 And cheque your stepper driver settings, especially the amp setting.
Wondered when you would get to using the dial indicator for precise measurement? (Haha). Looks like you have it dead on now! Congratulations!
Great video - subscribed
Awesome, thank you!
Z aixes comes line tell me solution
How to set xyz tuning
Hi have a look at my cnc lathe videos
Z axis comes line...
easy and fast to measure is gantry measure, xy and z
G'day, could you please upload set up or info about Rotary Axis?
because Mfg doesnot have any info in manual of my 6040 cnc router.
that will be great.
bingaom
G’day, I’m glad you like my video and thank you for your
comments and watching, it all helps me to improve my channel. Roger Clyde Webb Australia ;) PS, I will make a video on this soon;)
i have cnc 9014 Please Help
تم التحقق بواسطة المنتدى
Muy buenas noches, saludos a todos los amantes del CNC, les comento que construí mi máquina cnc y lo estoy controlando con el mach 3 , el problema es que cuando realizo mecanizados de grabado (en madera con una herramienta de grabado de 30 grados )para el acabado empieza a meterse cada vez mas y mas el eje Z , a medida que ba avanzando el eje Z se va entrando más de la cuenta y termina 10mm o 20 mm mas adentro de lo que tenia que terminar . porfavor si alguien me pudiera ayudar muchas gracias y saludos desde sucre Bolivia
nice share of info.
Well done sir very useful thanks
Most welcome
TY helped out 8)
that was a grate help .. thanks
you are grate
Hello