Hello David, Thanks for this great video! 🤩 In minute 9´55 you use a second video that is explaining how to clean the thermocouples and corretive in-house mould maintance. I would like to study that material. Could you share the source? Or let me know how can I find those videos? Thanks a lot 😃
I am not sure what video it is but I do have videos over cleaning molds& barrels in the same manner. I have been very busy to were I will be back Next month with NEW videos. Thanks for watching and the support to the channel.
It is up to you on what you use. there are all different types and they all are great to work with. I will post a list of suppliers Thanks for watching
@@anandt7725 Correctly sized barrel to avoid long residence time. Correct screw rotation speed to avoid over temp material. Check that barrel heaters are only operating at 30% duty Cycle. Always keep hot runner 3-5 degrees below nozzle temp. Run mould at correct temperature. Lower barrel heats during breaks and lunch Contact me on linkedin for detailed help.
Ive been following you for almost a year and have since become lead technician. I started at an assembly line position and then moved to a "set" tech and than taught myself to processing and became a processing tech. Now im lead processing technician at the molding factory i work for and ive brought several old school tips as well as some of your newer tricks into my plant that are super useful and helped me on my journey to doing the best molding i can.
That is great to hear from you. I try to make the videos to help others & sometimes I think it is not helping anyone out there. It makes me very discouraged & I want to quit the channel. I don't get paid from RUclips at all. They suck on the guidelines they want you to follow & I am here to train!!!! To hear you say I have helped you makes me feel good inside. Thanks for watching & the support to the channel I greatly appreciate it.
Hello David, Thanks for this great video! 🤩
In minute 9´55 you use a second video that is explaining how to clean the thermocouples and corretive in-house mould maintance. I would like to study that material. Could you share the source? Or let me know how can I find those videos?
Thanks a lot
😃
I am not sure what video it is but I do have videos over cleaning molds& barrels in the same manner. I have been very busy to were I will be back Next month with NEW videos. Thanks for watching and the support to the channel.
Thanks Dave. Your channel is pure gold 🙂
Glad you think so! Thanks for watching & the support to the channel I greatly appreciate it.
Thanks, David, Could you give some tips on how to choose the most suitable hot runner system from different suppliers.
It is up to you on what you use. there are all different types and they all are great to work with. I will post a list of suppliers Thanks for watching
How can solve degrade of poly carbonate in hot runner mould
@@anandt7725 Correctly sized barrel to avoid long residence time.
Correct screw rotation speed to avoid over temp material.
Check that barrel heaters are only operating at 30% duty Cycle.
Always keep hot runner 3-5 degrees below nozzle temp.
Run mould at correct temperature. Lower barrel heats during breaks and lunch
Contact me on linkedin for detailed help.
Sir will you please upload full video of HRS maintance
thanks
You're welcome! Thanks for watching & the support to the channel I greatly appreciate it.
Has anyone ever ran peek type material in hot manifold valve gate.
Thanks for watching & the support to the channel greatly appreciated.
sir please explain about dimension measurement in hot runner system installtion
I will try in the next coming weeks ok. Thanks for watching & the support to the channel I greatly appreciate it.
Hi Dave. How do I contact you for some technical clarifications?
David_lucas@bellsouth.net
Thanks for watching & the support to the channel I greatly appreciate it.
@@injectionmoldingskillsmore1064 👍
Thank's Dave! Very informative as always .
Thanks for watching & the support to the channel.
Is there a video on how to clean Hotrunner Systems of plastic molds?
I am not a 100% sure if there is or not. You can look on RUclips to check that or not. Thanks for watching & the support.
Ive been following you for almost a year and have since become lead technician. I started at an assembly line position and then moved to a "set" tech and than taught myself to processing and became a processing tech. Now im lead processing technician at the molding factory i work for and ive brought several old school tips as well as some of your newer tricks into my plant that are super useful and helped me on my journey to doing the best molding i can.
That is great to hear from you. I try to make the videos to help others & sometimes I think it is not helping anyone out there. It makes me very discouraged & I want to quit the channel. I don't get paid from RUclips at all. They suck on the guidelines they want you to follow & I am here to train!!!! To hear you say I have helped you makes me feel good inside. Thanks for watching & the support to the channel I greatly appreciate it.
Perfect content
Thanks for the support
Great content! Thanks!!
Thanks for watching & the support to the channel greatly appreciated.