Watched a bunch of videos of the best way to stretch and terminate horse fence. I've been buildin' commercial fence for 40 years. Yours was the best. Appreciate the tip on using mini-bolt-cutters (nippers) to carefully cut the knots to create strands to wrap around terminal posts and tie off.
goddammit. ANOTHER video that glosses over the ONE part I was looking for. How to keep the tension on the end and still tie it off. Why does everybody make a video of all of the easy parts and then cut to where the fence is magically tied off? Why? Every. Fucking. Video.
If your still needing to know how you tension on the backside of where your tying off so you have a few inches or a foot or 2 on a long run that’ll be slack and use it to be able to tie off and then when you release the tension it’ll absorb back into the length of the fence
Geez guys.....That is a super fine fence. That piping looks expensive. Best of success on your ranching activities. I saw some nice horses in the background.
I see you boys doing good work, but just wrapping the terminations instead of a proper knot and wrap is going to let those wraps unwind under tension. Seen it happen more than once. This fence may do fine without, but please keep it in mind for future.
When tieing the termination of the wire you should avoid touching the wire that is tensioned with those pliers. The smallest of scrapes or scratches significantly weakens the wire.
Not as easy as it looks? I hate how y’all fence guys try to complicate things. It really is as easy as it looks! Btw, you can use a single cone along with a tension rod and a stretcher bar. Myself and one guy will go stretch 1000ft of 6ft no climb today. Will be done in about 6hrs. It’s not that difficult..
Why the overkill? That should only be a 1 man job. 6+6=12 1000 foot stretch, considering you're on a level above "yall fence guys" is not a 2 man job. 2 guys is burning hours. You only need 1 man
Watched a bunch of videos of the best way to stretch and terminate horse fence. I've been buildin' commercial fence for 40 years. Yours was the best. Appreciate the tip on using mini-bolt-cutters (nippers) to carefully cut the knots to create strands to wrap around terminal posts and tie off.
goddammit. ANOTHER video that glosses over the ONE part I was looking for. How to keep the tension on the end and still tie it off. Why does everybody make a video of all of the easy parts and then cut to where the fence is magically tied off? Why? Every. Fucking. Video.
If your still needing to know how you tension on the backside of where your tying off so you have a few inches or a foot or 2 on a long run that’ll be slack and use it to be able to tie off and then when you release the tension it’ll absorb back into the length of the fence
Dang, I wish you'd showed using the come alongs and how you moved it to tighten. Fence looks great though.
Why would you skip over the most important part??
What the hell is with that final explanation ? The video was really good up till the end
Best video explaining this process appreciate it
Looks like you guys make a good team working together.
I don't know if you do this or not,I used a 1/4 steel tube 3" long,put on my wire spin it on with three or four wraps and no pliers
Tractor supply has a tool just for that job. $4
Yessir if you know you know
Nice job explaining how too. Thanks
Geez guys.....That is a super fine fence. That piping looks expensive. Best of success on your ranching activities. I saw some nice horses in the background.
Good video until the end which was the most important part.
Gud gawd I need a set of them mini bolt cutters. Dikes won't work. I have to "unwind" each of those twists with fence pliers. Takes forever.
Use a small battery grinder just be cautious works like a charm
I see you boys doing good work, but just wrapping the terminations instead of a proper knot and wrap is going to let those wraps unwind under tension. Seen it happen more than once. This fence may do fine without, but please keep it in mind for future.
When tieing the termination of the wire you should avoid touching the wire that is tensioned with those pliers. The smallest of scrapes or scratches significantly weakens the wire.
I run a 1 inch pipe in between the ends that are height of the fence. Use I com a long and tie to first H brace then pull to second.
Good info. Thanks.
beautiful job
Where can I buy the tool to stretch the wires on the fence? Thank you
smile.amazon.com/gp/product/B01FWPASOK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
That was great guys. 👍🏽
GREAT WORK YALL😎👌👍
What brand are the snips
knipex about 80 bucks but WORTH IT
you gotta be very cool to this sort of job nice
Thanks
fine job
I wanted to see you actually tie it in with it stretched
That's some nice work
You didn't show how you stretched it
look nice
🐼👍
where can I get your wire cutter
Good video except for the part of stretching and step by step process to stretching lol
It's not rocket science on how to stretch it 😂
Not as easy as it looks? I hate how y’all fence guys try to complicate things. It really is as easy as it looks! Btw, you can use a single cone along with a tension rod and a stretcher bar. Myself and one guy will go stretch 1000ft of 6ft no climb today. Will be done in about 6hrs. It’s not that difficult..
But yet here you are watching a video on how to do it 😂😂😂
Why the overkill?
That should only be a 1 man job. 6+6=12
1000 foot stretch, considering you're on a level above "yall fence guys" is not a 2 man job. 2 guys is burning hours. You only need 1 man
That took forever I'd be done by now
Totally skipped over the part. That was the reason I was watching the video. What the heck happened there? That was a waste of time.
Might be able to understand what your saying if you empty your mouth out first ???????
Top 5 worst RUclips video of all time