I had a 3Doodler Create a while back and it clogged every single time i used it, and when i did use it it barely worked. I then got a scribbler V3 and it was soooooo much better. It never clogged and it was super user friendly. I haven’t tried all these but from what i’ve seen the Scribbler V3 is one of the best you can get.
If some company could take the speed control of the 7Tech and add it to the small size of the 3Doodler Create, (with the price of the Dewang but using ABS/PLA) they'd have a winner.
Hello Davin! Video looks great! :) There is no need to be concerned about safety of CreoPop LED lights. Our LED light is in blue spectrum, so it is not harmful for the eyes. We have conducted a Photobiological Safety Test under IEC 62471-2006 Regulations, which proved that our LEDs are totally safe for eyes. Also, it will be more comfortable for your eyes if the room is well-lit and you use black mat surface for creating.
+CreoPop that's great to hear! I want sure since there is the auto shutoff when the pen is tilted, and commenters were saying it's because of the UV rays
you should make a second channel called "make anything 2D, where you can just doodle with traditional and digital drawing and possible do some stuff where you teach how to do stuff like sharing and anatomy or even just do speed drawings with commentary, anyway, you are awesome dude and hope you pass a hundred thousand at least
I got a 3d printer for christmas and it amazes me that i can now make my own plastic parts at home. technology has come so far. Great videos and I love your channel.
Excellent overview. I only own the 3Doodler Start and love it but wish the custom filament you have to use would come in longer lengths. Replacement filament is inexpensive but you can run through 2-3 sticks doing even the most simple design. On the plus side, it comes nicely packaged and with an excellent booklet. Great channel, great content and I look forward to whatever you post next!
Pierre Fontaine cant say the same i got a start a while ago and it got clogged in the first five minutes. I took it back, got another and the same thing happened! I now have a 3doodler create plus and i love it
Just started looking into 3D pens. We loved your video. Your succinctness and demeanor is quickly helping us make our decision. Thanks for the great review!
I got a pen last year and loved your channel for all the tips and ticks and DIYs, and this year I got a 3D printer! BTW I love your channel so much as I said before😍
I reccomend if you get a pen the takes a while the dry do it some where cold but don’t use a fan because for 3D structures it will blow it which causes it to curve
@@make.anything thanks for replying! Your videos really helped me in choosing the right pen, and have also given me a nice bit of inspiration for things I can do with mine! Thanks for the great content!
Can you please try out the UpDraw pen, I got it and I am not that sure how to use it properly. It's $70 at brookstone and the filiment comes in spools.
ziki ardani the light blue 7techh one is only 27 dollars on amazon with prime shipping and is amazing I would definetly recommend it also comes with 2 filament coils
For the 3doodler users: Buy a spool of 3mm abs-pla filament get you friends help to hold a long piece of the filament as straight as possible, take a hair dryer and blow on the filament for some seconds, and there you go!!! Cheap filament works for me!!!!!!
Thanks this was helpful but I'm on a budget and my local craft store has the create on sale so I'm gonna get it, my friend has it and she says it works great
IamBatnerd 26 I have the create I love it one complaint is that the filament is not cheap and it only comes in strands filament is 10$ for 25 strands and you use them quickly 😕
Your not really meant to draw in mid air for detailed projects keep that in mind. What youre supposed to do is draw the shapes on a grid then connect them with filler for a proper 3d project. Or if you want it curved then use a 3d stencil like a fruit for curvature
Henry Seymour I think so. Not only is it fairly easy to control, but it has two speeds: fast and slow, which would be recommended for amateurs. Also, the process of loading in plastic is very simple and easy. Just be sure not to touch the tip of the pen.
Which one cools fastest? I want to be able to draw up as quick as I can. I'm impatient. What can I say? Plus, drawing up is he only reason I want a 3D pen
Lillian Harris Pens that can use ABS plastic can draw straight up easier than those who use other materials. Check out the videos Devin made for the pens using ABS. (Listed in the chart at the end of this video.)
From what I've learned about the Creo Pop, it DOES NOT use UV lights, but rather LED lights, which are safe. I believe the safer LED lights was one of their marketing advantages offered in their advertising of their product (Just like the Polyes Q1 light curing 3D pen - which also looks really safe). From their website about safety: "The LED lights used by the pen are similar to LED flashlights."
absolutely perfect review. 1st time on the channel. subbed. obv thank you. I appreciate your chart there at the end quite a bit. not even sure if I’ll end up actually buying a 3D pen but the prices are so reasonable!
Thanks for helping me understand this newfangled gadget so i could make an educated decision on which pen would be best for my teenage daughter. Keep on!!
I bought filament for my 7tech (pla unless amazon lied) and it doesn't stick to any surface so it pops up when make it like cubes even on printing mat things like the one you used it also smells extremely bad
PLA barely smells, so maybe you got ABS, which is indeed more difficult to stick to surfaces.. It also helps to draw with the pen more vertical, instead of holding it like a regular pen
I think you have a small error in your chart. you can remove the hot end from the 3dsimo even if its clogged. They include a metal tool in the box to cut the filament right behind the hot end so it can be removed.
have you reviewed the MKOEM or tecboss/ aerg that is what I use and wonders what your view is I find the MKOEM to be a great detail pen and the tecboss great all rounder
I think the reason for that really slow speed is for stopping with a clean rod edge, just like welders do (post flow time on tig welders) as at the fast speed you show a stop looking like a star tail, which would not look very nice on an otherwise clean project
i once had a pen for only 15$, and it was stupidly good for this price! Can print pla and abs, adjustable speed, and controllable temperatures up to 230C. And to my surprise it lasted 3 months until it wont heat anymore. But for this price it lasted very long.
3doodler start is pure garbo, the filament is overpriced, battery doesnt have a lot of charge, its just bad. of course you cant get burnt by it but its still just poop, also the filament comes in tiny sticks, its weak abs plastic. also it looks like a dumb cucumber
Hi Thanks so much for this detailed review. I was able to decide to get my first 3D pen thanks to you. I just have a question though with fixing a clogged nozzle. The 3D printing pen I have doesn't seem to have removable parts. no screws or anything. Do you have other ideas on how I can fix clogs for this type of pen? Thanks in advance!!!
Ya know how when you stop pressing the extrude button, their can kinda be like a feathery tail of plastic, instead of a nice clean end separation? Which pen is best at that ? Which pen gives you the cleanest cuts ? No feathers, wavy, tails. Thanks.
thank you so much♡ the video was so helpful ... now i know what 3d pen i'll buy :3 would love to see a similar video about 3d printers and their printing quality .. or at least what printer would your recommend buying
This shows the Creopop which has an LED light which many think could harm the eyes. There is another 3D pen called a Polyes Q1 which also has an LED light. The reason for the light is to cure the plastic and harden it without using the extreme heat temperatures of the other 3D pens. This makes it safer for kids to use and it's safe on the eyes since its not a regular LED light. The company even won a Nobel Prize in Physics for their new technology.
you should test out the 3D Magi pen. my friend has it and it seems to be pretty terrible so you could show everyone what is a bad 3D pen to get to help people choose if they want one.
Have you checked out the Renegade yet? Apparently you can reuse your plastic bottles as filament! That's exciting! I'd love for you to review that one!
I tinker around with a few things and Im starting to think a 3D pen could be helpful. Im curious if any pens have plastic that can adhere more or less permanently to other objects. In particular, modifying cases to nerf guns and handheld game cases, and maybe on rare occasions LEGO bricks and fixing random plastic toys. Im also interested in making small odds and ends around the house, but nothing involved enough to buy a 3D printer. Is there a good pen and filament combo for these kinds of applications?
+Make Anything // 3D Printing Channel Good content, as always, but what's up with the video quality ? I see a "Yellow/orange cast" that "travels across the picture, from Your hands and up over Your face and then disappears. It's most clearly visible "on You", and oddly enough hardly visible on the "background", it's quite apparent in the "intro shot" from (approx) 0:11 - 1:30. I could spot it in any other parts of the video, but due to the content, not quite as clearly. But it's always a band/patch, that has the(very approximately) height of 1/5*frame, and is most visible in the center 1/3 of the width of the frame. It's centered horizontally and it "wanders" vertically from the bottom towards the top, but it's visibility seems to partly depend on the colour of the video over which it passes?? What's up...Have I eaten something "bad" ;) or is Your camera possibly "on the fritz" ?? Best regards
For me I'd like the scribbler ver3. I have seen many used that and good because u could replace the speed and the room temp. I just wish theres a in my country.
I know this video was a long time ago in another universe but it helped me. I wanted to know if you see this question: "Whats your go to pen now?" "Do you still use a pen on a regular basis?" -Jen
It's the 3Dsimo mini that can be controlled by smartphone, but it's not required. My lix just stopped working completely though, so I can't recommend that one
I just bought a Dewang x4 ,it actually came with PLA filament. It had the letters and size printed right on the package. It worked fine,the stream is thinner but it dried pretty quickly. I don't know if the filament makes the difference. The instructions did say to use PCL but didn't provide me with any. Have you tested your dewang x4 with pla filament?
Make Anything // 3D Printing Channel that could be it. I bought it off Wish and was hesitant,hoping it wasn't a knock off. Seems legit though. They might just be getting rid off old inventory. Only cost 41$ not including shipping
Thanks for the comparison video!! I really wanna try out the creopop. I have the 3Doodler create and quite like it, but I need to buy more filament for it. I wish they sold a big multipack for it..
Esther Gerlitz as mentioned in the video the start only has one speed while the create has two, they're made by the same company but they are different products made for different audiences.
I had a 3Doodler Create a while back and it clogged every single time i used it, and when i did use it it barely worked. I then got a scribbler V3 and it was soooooo much better. It never clogged and it was super user friendly. I haven’t tried all these but from what i’ve seen the Scribbler V3 is one of the best you can get.
thank the lord because i’m getting a 3doodler in the mail rn not create
Unique Giraffe the first 3doodler is the 3doodler create... which is the one tou are getting in the mail
I kinda looks like a dong
Omg I'm so happy i didnt get that one
Ayi wine 3D oodler yes yur end ayi🇮🇩 York inglis
I'll just keep creating things with my handy dandy 10 year old hot glue gun lmao
lol
Lol
lol
lol
lol
If some company could take the speed control of the 7Tech and add it to the small size of the 3Doodler Create, (with the price of the Dewang but using ABS/PLA) they'd have a winner.
nice
I got my 3 d pen at last and your channel helped me a lot to decide which pen to buy
Nice comparison!
Official Rainbow Girl HI I LIEK U
Thanks! I just saw you released a similar video a few weeks ago. I promise I didn't intend to copy you >.< It's great too, by the way
Exactly my point! The temperature automatically adjusts for the plastic you select
ITS OFFICIAL RAINBOW GIRL!!!
Make Anything // 3D Printing Channel -
Hello Davin! Video looks great! :) There is no need to be concerned about safety of CreoPop LED lights. Our LED light is in blue spectrum, so it is not harmful for the eyes. We have conducted a Photobiological Safety Test under IEC 62471-2006 Regulations, which proved that our LEDs are totally safe for eyes. Also, it will be more comfortable for your eyes if the room is well-lit and you use black mat surface for creating.
+CreoPop that's great to hear! I want sure since there is the auto shutoff when the pen is tilted, and commenters were saying it's because of the UV rays
I GOT A PEN FOR CHRISTMAS!!!!!
Sougirly girl Souricett1 same😃
Puppycakes Me same here! I got a 3Doodler Create. What about you guys!
Sougirly girl Souricett1 I got a pen for Christmas the 3DOODLER CREATE
I got the 3D Scribbler and I love it.
I got the scribbler v2
I have the exaxt same looking pen at 5:42 but it isn't called Scribbler V3 it is SketchPro
I mean they are all the same features too
AsianSquad ForLife same
JillianDIY cool
JillianDIY has
I have it as well. It is a lot of fun!
you should make a second channel called "make anything 2D, where you can just doodle with traditional and digital drawing and possible do some stuff where you teach how to do stuff like sharing and anatomy or even just do speed drawings with commentary, anyway, you are awesome dude and hope you pass a hundred thousand at least
I got a 3d printer for christmas and it amazes me that i can now make my own plastic parts at home. technology has come so far. Great videos and I love your channel.
15:04 - 16:14 for the 3D pen chart
Great video. A relief to find a proper review.... How I hate those videos that are just 5-kickstarter-ads-in-a-row.
Excellent overview. I only own the 3Doodler Start and love it but wish the custom filament you have to use would come in longer lengths. Replacement filament is inexpensive but you can run through 2-3 sticks doing even the most simple design. On the plus side, it comes nicely packaged and with an excellent booklet.
Great channel, great content and I look forward to whatever you post next!
Pierre Fontaine cant say the same i got a start a while ago and it got clogged in the first five minutes. I took it back, got another and the same thing happened! I now have a 3doodler create plus and i love it
Just started looking into 3D pens. We loved your video. Your succinctness and demeanor is quickly helping us make our decision. Thanks for the great review!
I got a pen last year and loved your channel for all the tips and ticks and DIYs, and this year I got a 3D printer! BTW I love your channel so much as I said before😍
www.aliexpress.com/item/SUNLU-SL-400-3D-Pen-V4-High-Quality-3D-Printer-Pen-Best-Gift-For-Children/32820389046.html
I reccomend if you get a pen the takes a while the dry do it some where cold but don’t use a fan because for 3D structures it will blow it which causes it to curve
Thank you for this! I've been looking into getting a 3D pen, but it's hard to know where to even start!
I have the MYNT3D pro. It’s been working really well and it didn’t cost all too much
The price has risen since I first got mine, but I agree, they're my new gold standard 👌 I've done a few more recent videos reviewing them
@@make.anything thanks for replying! Your videos really helped me in choosing the right pen, and have also given me a nice bit of inspiration for things I can do with mine! Thanks for the great content!
I bought the 3 doodle create the problem with mine is it was broken when I got it and so I got a different one and it got clogged after the first use!
You can change temp on the 3doodler, you use an included mini screwdriver to turn a screw that adjusts the temp.
I remember 3 years ago when I wanted it for my birthday 😂😂😂
Did you get it though
I watched this 2 years ago and got a 3doodler create for Christmas
Me too
Duuuuuuuude! You made the comparison chart accessible?! You are a life saver!
"This UV light is bad for your eyes"
*Points it at the camera*
It's Crona Your monitor isn't going to output UV light.
@@qwertyTRiG its a joke
@@benjaminchen4830
Responding to a 2 year old comment?
oof responding to a 1 week old comment on a 2 year old video, weird boast, but I’ll toast
@@miguelc5430
Don't know if your tiny pea brain is speaking for you, but I wasn't boasting.
I added a 3d pen to my birthday wishlist - this video of yours helps a lot. Kudos!
Can you please try out the UpDraw pen, I got it and I am not that sure how to use it properly. It's $70 at brookstone and the filiment comes in spools.
You can change the temperature on the 3doodler with the little tool that comes with it
So... which is it?
ziki ardani the light blue 7techh one is only 27 dollars on amazon with prime shipping and is amazing I would definetly recommend it also comes with 2 filament coils
😂
Thank you so much. !!! It was super helpful!!🙏🏾🙏🏾🙏🏾🙏🏾🙌🏾🙌🏾🙌🏾🙌🏾💕💕💕💕💕👍🏾👍🏾👍🏾🐢🐢🐢
For the 3doodler users:
Buy a spool of 3mm abs-pla filament get you friends help to hold a long piece of the filament as straight as possible, take a hair dryer and blow on the filament for some seconds, and there you go!!! Cheap filament works for me!!!!!!
_._necromancerjjj_._ Hello darkness my old friend
Jk😏
I love your intro and all your 3D pen videos are awesome and it's something I've never watched before You are awesome
Please, Someone! Please answer my question!
Can I use other 1.75 mm filament with my 3Dsimo? Or can I only use their filament?
I've used other filaments no problem
Do it will work
Great and fair review. I like the chart. It will really help people figure out which pen will fit their needs.
Thanks this was helpful but I'm on a budget and my local craft store has the create on sale so I'm gonna get it, my friend has it and she says it works great
IamBatnerd 26 I have one too and it's awesome
IamBatnerd 26 I have the create I love it one complaint is that the filament is not cheap and it only comes in strands filament is 10$ for 25 strands and you use them quickly 😕
Your not really meant to draw in mid air for detailed projects keep that in mind. What youre supposed to do is draw the shapes on a grid then connect them with filler for a proper 3d project. Or if you want it curved then use a 3d stencil like a fruit for curvature
thank you would a 3 doodle create be good for a starter who wants to get started?
Henry Seymour I think so. Not only is it fairly easy to control, but it has two speeds: fast and slow, which would be recommended for amateurs. Also, the process of loading in plastic is very simple and easy. Just be sure not to touch the tip of the pen.
Addicted to Fairy Dust thanks I am deciding between that and the 3Dsismo mini
Henry Seymour Go for the 3D simo mini!!
thanks for the comparison, great information to make an easier choice when getting the first 3dpen
Which one cools fastest? I want to be able to draw up as quick as I can.
I'm impatient. What can I say?
Plus, drawing up is he only reason I want a 3D pen
Lillian Harris Pens that can use ABS plastic can draw straight up easier than those who use other materials. Check out the videos Devin made for the pens using ABS. (Listed in the chart at the end of this video.)
did anyone else blow on their screen when he was drawing with the 3Doodler start when he was drying the first 3D line of the cube?
Can you please review the CoLiDo 3d pen??
From what I've learned about the Creo Pop, it DOES NOT use UV lights, but rather LED lights, which are safe. I believe the safer LED lights was one of their marketing advantages offered in their advertising of their product (Just like the Polyes Q1 light curing 3D pen - which also looks really safe). From their website about safety: "The LED lights used by the pen are similar to LED flashlights."
love ur vids ur a smaller channel I hope u get 1mil subs soon
the 3Doodler create is also certified by air ports so it can travel with you : )
somehow i'm getting a Ted Mosby vibe from you lol
Syafeeq Said OMG I thought I was the only one!!!
How I met your mother ted
Same dude!
absolutely perfect review.
1st time on the channel. subbed.
obv thank you. I appreciate your chart there at the end quite a bit.
not even sure if I’ll end up actually buying a 3D pen but the prices are so reasonable!
i use a hot glue gun
levana da banana kek
levana da banana same
levana da banana lol
Yea it's the best kind of 3d pen
Same
Thanks for helping me understand this newfangled gadget so i could make an educated decision on which pen would be best for my teenage daughter. Keep on!!
I bought filament for my 7tech (pla unless amazon lied) and it doesn't stick to any surface so it pops up when make it like cubes even on printing mat things like the one you used it also smells extremely bad
PLA barely smells, so maybe you got ABS, which is indeed more difficult to stick to surfaces.. It also helps to draw with the pen more vertical, instead of holding it like a regular pen
Make Anything // 3D Printing Channel my 3doodler create was only 65 dollars
Make Anything // 3D Printing Channel
Pigzey just use his trick and spray hairspray on it
Pigzey I use paper and I melted my place mat (sorry mum)
I have been waiting so long for this
You should've done this before Christmas lol
been saving my Christmas money for your thoughts on this... thanks for helping me decide! xx
where do you get the 3D pen
Heaven Perry where you got the 3d pens please tell me.
u create them using a 3D pen
Probably Amazon
Mesut Ramsey XDDDDDDDDD
Ebay
I think you have a small error in your chart. you can remove the hot end from the 3dsimo even if its clogged. They include a metal tool in the box to cut the filament right behind the hot end so it can be removed.
It's disappointing that you didn't do the v 1 v 2 for the scribbler but still luv your vids
have you reviewed the MKOEM or tecboss/ aerg that is what I use and wonders what your view is I find the MKOEM to be a great detail pen and the tecboss great all rounder
you should make some stuff out of hot glue
Jonathan Attaway True
Jonathan Attaway it's not hot glue!!!
THE BIG SNOWY OWL he knows it's not hot glue he just said they should try hot glue compared to this
I bet you say that to all the little boys ~
I was excited for the Lix pen when it was first mentioned, but the 3Doodler Create and 3DSimo are interesting.
The 7 tech acually can be bought on Amazon for 35$ its just a diffrent brand wich means 7 tech is a big rip off
My Dewang pen is on the way, except it was on sale for $55. It also is the medium heat version, so it will act more like other pens.
You and the official rainbow girl should do a colab
I think the reason for that really slow speed is for stopping with a clean rod edge, just like welders do (post flow time on tig welders) as at the fast speed you show a stop looking like a star tail, which would not look very nice on an otherwise clean project
I think 3D Simo is the best
Belén Bassadone do you have one?
TraineeBee no but I've used it
Belén Bassadone i own the 3doodler 2 and the 3doodler start but i agree the 3d simo is best and i really want it
i once had a pen for only 15$, and it was stupidly good for this price! Can print pla and abs, adjustable speed, and controllable temperatures up to 230C. And to my surprise it lasted 3 months until it wont heat anymore. But for this price it lasted very long.
dang you look just like brendon urie.
love especially your 3Dpen-related videos, keep going!
yah keep making 3D pen videos
Luisaa D .^. True
Luisaa D BRENDON URIE WHERE
Luisaa D he looks NOTHING like him 😂
BRENDON URIE
I actually got the scribble V3 for Christmas. I'm so happy about it. :')
3doodler start is pure garbo, the filament is overpriced, battery doesnt have a lot of charge, its just bad. of course you cant get burnt by it but its still just poop, also the filament comes in tiny sticks, its weak abs plastic.
also it looks like a dumb cucumber
Damn, I never knew somebody could roast a literal pen
I got a 3doodler create for Christmas but my aunt didn't know that the create only takes 3mm filament and got me coils that where 1.75mm 😂
You might also want to wear gloves with that UV pen.
What about the noise. Which ones are the quietest. That's quite important in my opinion.
The LIX is the quietest
Damn I can't get over how cute he is! 😍😂😍
Jordan Randell-Tredgett rip
ikr
Jordan Randell-Tredgett ikr
ikr
You will. Just give it time.
Hi Thanks so much for this detailed review. I was able to decide to get my first 3D pen thanks to you. I just have a question though with fixing a clogged nozzle. The 3D printing pen I have doesn't seem to have removable parts. no screws or anything. Do you have other ideas on how I can fix clogs for this type of pen? Thanks in advance!!!
I have the 3dsimo, and the 3doodler create
Luca Tropea which do you like more? And do you have issues with not being able to replace the hot end on the simo?
Luca Tropea n
Very useful information, I’ll be buying one of those.
This video makes me want to buy no 3D pens.
Ya know how when you stop pressing the extrude button, their can kinda be like a feathery tail of plastic, instead of a nice clean end separation? Which pen is best at that ? Which pen gives you the cleanest cuts ? No feathers, wavy, tails. Thanks.
first
Hor
peter kay
You are a bit off...
thank you so much♡ the video was so helpful ... now i know what 3d pen i'll buy :3
would love to see a similar video about 3d printers and their printing quality .. or at least what printer would your recommend buying
The Create has a variable temperature and speed range in the hole by the 4 pins and power switch.
I loved your end comparison thingy, it was really cute and kinda reminded me of a video game or something
This shows the Creopop which has an LED light which many think could harm the eyes. There is another 3D pen called a Polyes Q1 which also has an LED light. The reason for the light is to cure the plastic and harden it without using the extreme heat temperatures of the other 3D pens. This makes it safer for kids to use and it's safe on the eyes since its not a regular LED light. The company even won a Nobel Prize in Physics for their new technology.
Do you sometimes use a Mac and sometimes a PC? Also, do you have any recommended 3D printers? Thanks :)
you should test out the 3D Magi pen. my friend has it and it seems to be pretty terrible so you could show everyone what is a bad 3D pen to get to help people choose if they want one.
I have a 7Tech but I'm still learning how to use it.
Have you checked out the Renegade yet? Apparently you can reuse your plastic bottles as filament! That's exciting! I'd love for you to review that one!
I tinker around with a few things and Im starting to think a 3D pen could be helpful. Im curious if any pens have plastic that can adhere more or less permanently to other objects. In particular, modifying cases to nerf guns and handheld game cases, and maybe on rare occasions LEGO bricks and fixing random plastic toys. Im also interested in making small odds and ends around the house, but nothing involved enough to buy a 3D printer. Is there a good pen and filament combo for these kinds of applications?
+Make Anything // 3D Printing Channel
Good content, as always, but what's up with the video quality ?
I see a "Yellow/orange cast" that "travels across the picture, from Your hands and up over Your face and then disappears.
It's most clearly visible "on You", and oddly enough hardly visible on the "background", it's quite apparent in the "intro shot" from (approx) 0:11 - 1:30. I could spot it in any other parts of the video, but due to the content, not quite as clearly.
But it's always a band/patch, that has the(very approximately) height of 1/5*frame, and is most visible in the center 1/3 of the width of the frame. It's centered horizontally and it "wanders" vertically from the bottom towards the top, but it's visibility seems to partly depend on the colour of the video over which it passes??
What's up...Have I eaten something "bad" ;) or is Your camera possibly "on the fritz" ??
Best regards
something to do with the fluorescent lighting in my garage :\
It would be nice to have an updated version comparing some of the better ones against the newest ones from the last year
For me I'd like the scribbler ver3. I have seen many used that and good because u could replace the speed and the room temp. I just wish theres a in my country.
I know this video was a long time ago in another universe but it helped me. I wanted to know if you see this question: "Whats your go to pen now?" "Do you still use a pen on a regular basis?" -Jen
They all seem to have a high pitched noise, is that the camera sound or is it high pitchy? Thank you for the reviews btw! Helped me out decide. :)
They all have some kind of whirring noise.. it doesn't bother me, but I guess it's something to consider!
Now you have to ask yourself...did you draw those cubes to perspective?
Thanks Dave -great job! Does it mean, that the Lix is only operable with a Smartphone?
It's the 3Dsimo mini that can be controlled by smartphone, but it's not required. My lix just stopped working completely though, so I can't recommend that one
I just bought a Dewang x4 ,it actually came with PLA filament. It had the letters and size printed right on the package. It worked fine,the stream is thinner but it dried pretty quickly. I don't know if the filament makes the difference. The instructions did say to use PCL but didn't provide me with any. Have you tested your dewang x4 with pla filament?
Hmm.. I know they had a PLA version, maybe they just gave you the wrong instructions?
Make Anything // 3D Printing Channel that could be it.
I bought it off Wish and was hesitant,hoping it wasn't a knock off. Seems legit though. They might just be getting rid off old inventory. Only cost 41$ not including shipping
Thanks for the comparison video!! I really wanna try out the creopop. I have the 3Doodler create and quite like it, but I need to buy more filament for it. I wish they sold a big multipack for it..
What do you think about Renegade? Want to get it, but I only find video ads for it instead of reviews on YT.
Your reviews help me so much and now i don't need to think and take hours also I won't get the wort one on accident thank you so much😇😇
i got a 3doodler start yesterday and it is sort of annoying that it only has one speed.
Anna Kate Brown I have a 3doodler create. I'm pretty sure there are 2 speeds.
Esther Gerlitz as mentioned in the video the start only has one speed while the create has two, they're made by the same company but they are different products made for different audiences.
Esther Gerlitz actually, mine is the start. The create is more advnced
I really like how you edited this video.
I think the 3Doodler create+ is the best but now i think its a 3D simo
9:30 when I didn’t finish my project and my mom is almost home:
do you think the Scribbler V3 or the 3Doodler create is easier and better to use?