Quinetic Wireless Switch & Built in-line Receiver - What Happens when the Power goes OFF & Unpairing
HTML-код
- Опубликовано: 1 май 2024
- What happens to my paired Quinetic wireless switches that use kinetic energy when the power goes OFF..?
How to unpair Quinetic wireless switches that use kinetic energy...
Is using kinetic switches the future as they don’t need wiring or batteries to power them. In my previous video I replace a one gang one way switch with a Quinetic Wireless in-line receiver then add other kinetic switches to control the light (link below). This a fast way of converting a wired one way switch to be controlled from more than one switch with out the need to run cables, lift floorboards or chase walls. I showed in a few minutes how to pair Quinetic kinetic switches so you have 2 way and 2 way and intermediate switching of a light.
The pairing process of other kinetic switches is very easy and takes only a few seconds to do.
🔵 No More Wiring Light Switches - The Secret is Out - Quinetic Wireless Switch with Built in Receiver
• No More Wiring Light S...
🕐 Time Stamps - Cut to the action 🕕
00:00 - Quinetic inline receiver
00:22 - 5 switches controlling the light(s)
00:51 - Power cut
01:31 - With the power back on with the switches all work..?
01:44 - How do we unpair the switches
02:28 - Switches unpaired
02:36 - How to pair a switch
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK / gshelectrical
▶️ INSTAGRAM / brihzmraygdtmjmdb9lunq...
▶️ TWITTER / gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos
There are some people who spend their time not only improving their own knowledge, but also helping those expand their understanding, a true educator. Gaz is definitely one of those people. Power to you! (Pun was completely intended)
Massive thanks for the great comment and watching my stuff 👍🏻. Gaz
I'm not an electrician, but those switches look very clever and quite simple to use 👌🏻
😁👍
Awesome. Thanks for answering the question.
More to follow 👍🏻
Hi Gaz, If during a rewire of the house, can you legally replace all the light switches with this new way giving you the flexibility to put the switch/switches wherever suites or do regulations say the original fixed wiring always has to stay in place.
I remember many yares back I had IR switch that worked with my audio systems remote also. I wonder can walkie-talkie work same way with these one?
will these work ok with fluorescent lights, if so whats the maximum load thanks
Does it come in a 2 way version, ie one that could replace an exiting two way switch and then add others as intermediate switches
Amazing video mate
Thanks 👍🏻
@@GSHElectrical I was wondering Gaza can you connect one receiver to another receiver just like a normal quinetic switch
Can you pair a switch to more than one receiver?
How do you connect it when the feed is in the switch? Or do you need a Quinetic switch as opposed to the receiver in the ceiling?
How does the switching affect any other lighting in the loop the original light is connected to?
If you put them in different rooms the one for the master bedroom won’t turn on the kids room will it. What I mean are there different frequencies I imagine their would be.
Can you have more than 1 Receiver? say you have 3 Bedrooms each with their own Receiver, would it work or are you limited to 1 receiver per house?
Magic
What I really need to know is, what is the yearly power consumption of one of these receivers.
what voltage range can this system operate at
Can you add just 1kinetic grid switch with a receiver and 1 wired switch to make a 2 way circuit on a loop in loop out system
Can you have one ganged switch turn on two bulbs independently
How can I add an intermediate quinetic switch to an existing 2way switched circuit for the landing?
In electronics terms, the pairing is stored in “Non Volatile” memory, which means it stays in memory even when power is dissconected
😮👍🏻
When power is restored, does the light return to its previous state? ie it comes on if it was on or stays off if it was off?
A visit to my local electrical dealer tomorrow!
I must admit they are a nice bit of kit , until they pack up . The you have to pend more money to replace them, as I don’t like modern technology I don’t see me installing them in my any time soon. But they are nice.
Fantastic video Gaz as always 👍👍👍❤️
I'm from Malaysia.
Thank you for this tutorial video. An ergonomic and safest method in dealing with electrical switches.
Where can I purchase these devices?
Did you find it?
Do they have a smart version???
When the power was switched back on the light was on. Can this be changed so they are off when the power comes back on?
What if a neighbour has the same system, would that interfere with your switches? Thank you for all your very informative videos.
I was thinking of the same question. What if the other room has the same set of switches would that interfere with the other set of switch? Will the two sets of switches pair differently? If this topic can be brought up and it happens to pair defferently, im buying this switch right away. I hope you shed a light on this and post it in your next video. Thank you now for the previus informative video and thank you in advance for your next video.
I would say no, because the neighbours set up would already be paired and set up (ie, closed to other devices). However if in the extremrly unlikely circumstances that you and your neighbour happened to be setting up switches at the exact same moment in time then yes it's possible.
You can turn the neighbours light off when there in the shower 😂
Can that kinetic switch system be used in America, with grounded switches. Also I didn`see any ground wire on the switch?
👍🏻
Ah but what happens when there is a power cut and the light was off. Does it remain off when the power comes back on. I only ask because our touch lamps come on when the power comes back on even if they were previously off. This means when we are away on holiday we have to unplug these incase of a power cycle and they come on and stay on for a week when we're not there.
👍👍👍Gaz
Where do i buy these plz
I had switches come unpaired headache
Just come across your video's, very enlightening for a ''non electrical knowledgeable person''. But I do have a question, are these available in 12v do you know? Had a search online but couldn't find anything.
You can get a 12v quinetic receiver. TLC-direct
how can someone get registered and the requirements
What about other brands of kentic unit would they be ok to install
WIRELESS SWITCHES with STANDARDS - ENOCEAN kinetic switches by Retrotouch
ruclips.net/video/tg5GMKiGnvg/видео.html
Is this availabl in India ?
How far the switches can be placed before it loseses signal? Cheers
25 metres
Does anyone know how the receiver is deriving its power, without a Neutral - my only conclusion is there must be a small current drawn through the load when it is off?
I assume it does, hence the required more than 3w light fitting in order to operate.
Why not just have the Module inside a Bulb Socket Assembly, further reducing the cost of wiring ?
Can a slave switch also act as a master for pairing?
The need of the master switch for un-paring only would be logical.
Interesting you didn’t use the grid switch ...I have had two faulty one to date
Thanks for that feedback - I have the grid switch in my house 👍🏻
Very Interesting - I wonder if the light is off - you have a power failure - does the light come on when power is restored? Or does it remember it's last state?
It remember it's last state. The data is stored in non volatile memory in the receiver.
@@tomswiftTTT Not good! It should default to OFF after a power failure for safety reasons.
@@charlesrichards5389 why is that? Surely if there was a momentary power cut and the light was on, once power was restored I think it would be infinitely much safer to return to being on. For example if you were traversing stairs?!
@@marcusshipley3935 You're talking about visual safety when the mains go down momentarily. I'm talking about electrical safety within the house. If you had a short due to a water leak, rodent chewed a wire, etc., you could have a fire hazard if the power automatically flowed when it's restored. If you don't want to be caught on the stairs during a power outage (regardless of duration), get battery-powered automatic emergency lights for such locations.
@@charlesrichards5389 I see your point but surely its exactly the same as if the lightswitch was on when the interruption in supply and/or fault occurred?! If there's a short or a water leak compromising the electrical installation or part of it, then, a competent person ie, an Electrician is required to make safe regardless of whether a light switch is on or off?!
Does it works with Alexa or other sensors like motion detection?
Not Alexa
@@GSHElectrical thanks. So, does it work with motion sensors?
@@aperezuk they have battery sensors in the range 👍🏻. They have different receivers that work on Wi-Fi as well.
OK where can I buy this at?
TLC wholesalers
Aint worked for me one of these. Trips the rcd intermittently.
Does it work with Alexa?
www.quinetic.co.uk/products/wifi-receiver/
Why not in the rest off Europe??
Look for EnOcean switches
@@GSHElectrical Thx for sharing !
@@GSHElectrical do you know of a brand for the US? I know of a battery powered switch that is paired to an Amazon Alexa and triggers Alexa routines.
Can you pair a switch to more than one receiver?
Yes 👍🏻
How does that work? If you pair it with two separate light circuits, will it just flip state of both lights? What if one light is on and the other is off?
@@andycarter9845 I was thinking more in using it for 2 or more outdoor lights but on 2 or more feeds where you dont want to run wiring outside the building linking them. That way you and cut down on the circuit of wires but have one switch to opperate them.