The changeover connection for nepa and gen makes it only for the gen to pass current to the inverter first before the inverter can send output. In some cases you need to comfirm from the client the capacity of the gen before connecting it to power the inverter directly. If it can't then it's best the gen has the connection to power the d.b directly.
@winnieedigin actually, all AC charging sources go through a digital surge regulator that can be turned on or off. Also, taking the change over to the other side bypasses the solar system hence,power to the DB directly.
Pls I have 2 Felicity Lithium batteries and I want them to communicate with each other and then to the inverter as one unit. I have the black communication cable and the white one. Which socket do I connect the black cable between the batteries and which socket will I connect the white cable from the "primary" battery to the inverter?
@bafotiguisako4760 . This model of inverter doesn't support wifi However, you can setup communication between the inverter and a computer via the communication ports provided.
There is not enough space for a screwdriver between the inverter and the distribution board. This space is crucial when there is a need to open and clean the air inflow vent on the upper sides.
@ifegbopaschal3024 Thanks for this observation. We have corrected that in our other installations. Also, we have short screw drivers specifically for this. Thanks again. Enjoy your day👍
Hi Thanks for your response. And yes a 5kva inverter can be used with 2 units of 10kwh lithium batteries. Just connect the two batteries in parallel then connect it to the inverter. Remember to set the DIP switches of the batteries appropriately.
Thank you for your response. The noise arises from the fan blades that are used to cool the inverter and it is automatically controlled. So when the temperature is high,it starts when the temperature drops, it stops. To have minimal noise, the best is to install an Air conditioner to be cooling the room where the inverter is installed
Good job
Keep up
Thanks my boss🎉🎉
it was a clean installation i love it
@@arisereebimini6153
Thanks boss
Too clean
The changeover connection for nepa and gen makes it only for the gen to pass current to the inverter first before the inverter can send output. In some cases you need to comfirm from the client the capacity of the gen before connecting it to power the inverter directly. If it can't then it's best the gen has the connection to power the d.b directly.
@winnieedigin actually, all AC charging sources go through a digital surge regulator that can be turned on or off.
Also, taking the change over to the other side bypasses the solar system hence,power to the DB directly.
Can you pls make a video of where
Of how you setup ur SPD
Where the spd grounding wire go to
Ur work is too neat keep it up sir 🙏🏾
@ezewuprosper3836
Thanks
We have already done the connection in a previous video sir.
Please check out previous videos.
Thanks sir
Pls I have 2 Felicity Lithium batteries and I want them to communicate with each other and then to the inverter as one unit.
I have the black communication cable and the white one.
Which socket do I connect the black cable between the batteries and which socket will I connect the white cable from the "primary" battery to the inverter?
@@odaddinson
Thanks for reaching out.
Do message me on whatsapp.
It will be easier to show you what to do from there.
+2348164905648
Could you send me an application for setting up a wifi cloud communication ???
@bafotiguisako4760 .
This model of inverter doesn't support wifi
However, you can setup communication between the inverter and a computer via the communication ports provided.
How to connect the 10.2kw hybrid solar inverter to Wifi please
@bafotiguisako4760
I guess it's an sms inverter right??
If yes, you will have to purchase the WIFI Donggle
There is not enough space for a screwdriver between the inverter and the distribution board. This space is crucial when there is a need to open and clean the air inflow vent on the upper sides.
@ifegbopaschal3024
Thanks for this observation.
We have corrected that in our other installations.
Also, we have short screw drivers specifically for this.
Thanks again.
Enjoy your day👍
Est ce que un inverseur de 5kva peut porter 2 batteries de 10kwh
Hi
Thanks for your response.
And yes a 5kva inverter can be used with 2 units of 10kwh lithium batteries.
Just connect the two batteries in parallel then connect it to the inverter.
Remember to set the DIP switches of the batteries appropriately.
always drag the panel with the back not the face
@@arisereebimini6153 okay
Noted my boss.
Thanks for your kind response 👍
Why is the inverter too noisy? Is there non that's quiet?
Thank you for your response.
The noise arises from the fan blades that are used to cool the inverter and it is automatically controlled.
So when the temperature is high,it starts when the temperature drops, it stops.
To have minimal noise, the best is to install an Air conditioner to be cooling the room where the inverter is installed
How much is this complete setup??
Its costs three million nine hundred thousand naira.
Thanks for your response