Good explanation and video. How long bateries last, i'm building my second boat, will be with 2 540motors and 580mm long, i have not deside what bateries to get.
The batteries last really well but it obviously depends on how far you are sending the boat out etc. but the 7ah batteries that I use are spot on for me.
It’s set up as tank steer which means it can turn on a sixpence. I ended up taking the mixer unit out and changing my transmitter to the Turnigy FSi6 which allows you to do vtail mixes which really helps
Neil Powell - hi Neil. If you search for NQD Impeller jet on eBay you should find loads of them. I changed the motors on mine as there wasn’t much info available on the ones that came with it. Sorry, I don’t know the weight of the boat as I haven’t weighed it.
les cooke the mixer was set up with pins 1 and 4 covered if that makes sense. So none of pins are joined. One of the leads went into Ch 2 and the other into ch4. I can’t remember which. The leads were then connected to the esc’s. Remember to remove one of the positive (red) cables from one of the esc’s as you don’t want both batteries powering the receiver. Hope this helps.
Good explanation and video. How long bateries last, i'm building my second boat, will be with 2 540motors and 580mm long, i have not deside what bateries to get.
The batteries last really well but it obviously depends on how far you are sending the boat out etc. but the 7ah batteries that I use are spot on for me.
Hi
how did you solve the direction and reverse?
I am discouraged from using 2 engines, because I will not be able to maneuver the boat
It’s set up as tank steer which means it can turn on a sixpence. I ended up taking the mixer unit out and changing my transmitter to the Turnigy FSi6 which allows you to do vtail mixes which really helps
Hi, i'm currently making a bait boat. What does yours weigh. What size is the outlet on the impeller jet? do you have a link for them? thanks
Neil Powell - hi Neil. If you search for NQD Impeller jet on eBay you should find loads of them. I changed the motors on mine as there wasn’t much info available on the ones that came with it. Sorry, I don’t know the weight of the boat as I haven’t weighed it.
Can you reverse the boat at all with the impellor jets fitted.
hi stix, could list all the componants you used. cheers buddy
What componenta will you use to operate the hopper ?
hi where or how did u make the hull
Keolin Moodley hi. I didn't make the hull. I bought it off eBay. It was a prototype hull that they had made from fibreglass and only cost about £30.
Hi how do i get the mixer to work correctly.
How did u set up the mixer?
les cooke the mixer was set up with pins 1 and 4 covered if that makes sense. So none of pins are joined. One of the leads went into Ch 2 and the other into ch4. I can’t remember which. The leads were then connected to the esc’s. Remember to remove one of the positive (red) cables from one of the esc’s as you don’t want both batteries powering the receiver. Hope this helps.
les cooke email me at stix77@talk21.com if you would like me to send a picture of what I mean
Stix 77 ah many thanks, one of my esc's is duff, so gotta get a new one