Thank you!! I wish I had found your video about 10 hours ago. I have been fighting wit this thing and as soon as I found your video, everything just worked. Thank you. ANd, I love your easy going style. So well done. Thanks.
Here's how addressing works on the I2C LCD adapter: The address of this particular adapter will always be a 2-digit hexadecimal number in the range of 20 to 27 (0x20 to 0x27). There are three address jumper pads on the adapter PC board labeled A0, A1 and A2. The address lines have pull-ups, so an open jumper sets the address line to a 1, while a closed jumper sets it to 0. The jumpers determine the least significant digit of the address, while the most significant digit is always 2. Therefore, the least significant digit will correspond to this truth table, where a 1 signifies no jumper, a 0 signifies a jumper in place: A2 A1 A0 I2C addr 0 0 0 0x20 0 0 1 0x21 0 1 0 0x22 0 1 1 0x23 1 0 0 0x24 1 0 1 0x25 1 1 0 0x26 1 1 1 0x27 So, installing no jumpers (the default) results in an address of 0x27 on these adapters.
Very helpful upload, thank you! Nice to see you make the mistakes in the video and to think as someone who watches the video what could be wrong and how to fix it. I will surely subscribe.
Finding sketches and methods for pc hardware monitoring are hard to come by for i2c LCD's. I tried to get one working with LCD Smartie but all I get is random numbers. If you know of any methods of monitoring pc motherboards, i.e. cpu speed, available ram, etc please let me know.
Thanks a lot, great video :) Btw, do i need to solder all the A0 A1 A2 pins in the i2c to get several adresses, for using only 2 lcd screens and display different text ? Thx in advance and thx again for this great video !
I don't know if it was the same problem i had - but the solution was the potmeter setting. A slight turn and the characters turned nicely up on the screen.
Hi there! I followed exactly along and my ide shows an error with the lcd.begin() comand. It says there is no matching function to call in liquid crystal....Please help!
@@rohithreddy-paripelly I did some thinking, the latest version wants us to initialize the LCD as an init method in the setup loop and include (16,2) on the LCD.begin
You saved me there when you mentioned potentiometer, my LCD was new so I was having problem why there were no text displaying. THANKSSS.
Your footage on how to install the I2C LCD library enabled me ot get up and running. Thanks!
Thank you!! I wish I had found your video about 10 hours ago. I have been fighting wit this thing and as soon as I found your video, everything just worked. Thank you. ANd, I love your easy going style. So well done. Thanks.
Here's how addressing works on the I2C LCD adapter:
The address of this particular adapter will always be a 2-digit hexadecimal number in the range of 20 to 27 (0x20 to 0x27).
There are three address jumper pads on the adapter PC board labeled A0, A1 and A2. The address lines have pull-ups, so an open jumper sets the address line to a 1, while a closed jumper sets it to 0.
The jumpers determine the least significant digit of the address, while the most significant digit is always 2. Therefore, the least significant digit will correspond to this truth table, where a 1 signifies no jumper, a 0 signifies a jumper in place:
A2 A1 A0 I2C addr
0 0 0 0x20
0 0 1 0x21
0 1 0 0x22
0 1 1 0x23
1 0 0 0x24
1 0 1 0x25
1 1 0 0x26
1 1 1 0x27
So, installing no jumpers (the default) results in an address of 0x27 on these adapters.
Nothing displayed on screen, only white boxes.. lcd lights up but no text written
using arduino uno r3
I very2 like this video! very help me. The voice is very clear, very easy to understand. good work dude
Very helpful upload, thank you! Nice to see you make the mistakes in the video and to think as someone who watches the video what could be wrong and how to fix it. I will surely subscribe.
Thanks! Very informative.
Finding sketches and methods for pc hardware monitoring are hard to come by for i2c LCD's. I tried to get one working with LCD Smartie but all I get is random numbers. If you know of any methods of monitoring pc motherboards, i.e. cpu speed, available ram, etc please let me know.
Thanks!
HI I am using Arduino IDE and had a problem with the display only printing 1 character. If the library you used updated?
.
Nice video, Thank you :)
thanks its amazing i leard a lot
Thanks a lot, great video :) Btw, do i need to solder all the A0 A1 A2 pins in the i2c to get several adresses, for using only 2 lcd screens and display different text ? Thx in advance and thx again for this great video !
Thanks a lot sir ❤
Can you make a video about mpu6050
I can't get the characters to show ='(, got everything wired and the address right.
I don't know if it was the same problem i had - but the solution was the potmeter setting. A slight turn and the characters turned nicely up on the screen.
Which version are you using?
Hi there! I followed exactly along and my ide shows an error with the lcd.begin() comand. It says there is no matching function to call in liquid crystal....Please help!
You need to download I2C liquid crystal.h library from browser on GitHub or Arduino libraries website
@@rohithreddy-paripelly I downloaded everything but the problem still persist
@@Time4yes just check coding use correct representation .. check the connection and. Code connection...
@@rohithreddy-paripelly I did some thinking, the latest version wants us to initialize the LCD as an init method in the setup loop and include (16,2) on the LCD.begin
My LCD does not print anything even after I have followed all your steps
Which version of arduino are you using?
It's arduino uno r3. By the way, i found the solution for my problem.
@@nguyenvankhanhduy3958 alright no problem. You are probably doing advanced projects now👍
when i compiled and uploaded the sketch it says, "an error occurred when uploading the file" huehue
I'm facing similar problem. Did you find a solution to it?
@@shivansh4581 i find another resource. Watch Robojax tutorial in yt.
@@kevinbelza67 I figured out mine too. Thanks anyways.
can u give me a link of library i2c