Thanks a lot for your appreciation my friend. This is a great encourage for me as a content creator who creates videos with less resources. By the way I am a Sri Lankan. Not an Indian.☺
Thank you so much for you help, i was stuck for an entire week yet deadline for my project presentation was closing in. Watching this video has helped me a lot to identify my lcd which was 0x3F yet my code was showing 0x27. I was really stuck. You deserve more views and subscribers.
ARE YOU KIDDING ME?? I just spent half an hour soldering headers in my display and now that i watched your video i realised that i should have soldered this black thing instead, i feel like having a beer
Hey, this is the best Indian tutorial i've ever seen on Arduino! Your voice is crystal clear (unlike others) with easy to follow explanation! I hope in the future your channel would be more popular than now.
Thank you! I finally got my display working thanks to your very helpful video. I am a total beginner and there is a lot of bad information about the i2c display but your video finally has my display working 😀
Hello, I have a great interest in electronics and I want to reach the stage of inventing and producing a board. Therefore, I have studied Electronics 1 & 2 and Electrical Circuits 1 & 2 at university, but I feel like something is missing from my knowledge. I kindly request you to explain to me the map, path, and way to become a PCB designer from beginner to advanced level. I kindly ask you to tell me what I should learn from the beginning to the end in order
Very useful, thank you friend! I only had issues with contrast, bu easily solved by turning the potentiometer on the i2c module! I also forgot to solder the SCL wire😂
I made distance measuring with ultrasound sensor ,less than15cm, turn on led otherwise off,but led flickers if distance more than 15cm,plz can u suggest something
I'm in a project. My load cell is connected to HX711 amplifier.. and HX711 is connected in the Arduino UNO's 5V pin. I have 16X2 Blue Backlight LCD Display Is it okay if I HX711 to 3.3 V or is it okay to change the Serial Interface (12C) to 3.3 V..
facial and voice recognition based security and safety system in car. Can we do by using arduino. Can you help me do this project with the source codes..
im facing this code after uploading Sketch uses 4032 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 522 bytes (25%) of dynamic memory, leaving 1526 bytes for local variables. Maximum is 2048 bytes.
Hi... I'm using Arduino IDE 2.2.1. As you know the software is different. I'm unable to find a library folder in the installation folder. Also when using i2c finder, I don't get the location as well. Can you help.
Hello i need help, i have freenove arduino uno with a different lcd display than this. lcd name as i can see is "EONE LCD" i dont have the same library as yours but it seems my library works ok. Im getting "Problem uploading to board" error whats the solution?
ciao. non so potresti aiutarmi, mi hanno regalato una board simile arduino ma a bordo un atmega 64 ho visto il tool di arduino uno mega ecc.. non e' supportato, comunque mi sono messo alla ricerca e finalmente con una interfaccia isp di pochi euro riesco a programmarlo. il problema e che in rete non trono nulla riguardo utilizzo porte analogiche e protocolli i2c per dispay e lcd , mi potresti aiutare tu con qualche esempio sempre se puoi ..grazie Francesco
i downloaded the i2c address finder from the link you provided and extracted it but it didn`t show the arduino code and the file type is INO files and the size is 1kb and it can`t be opened please help it urgent
Hey if your not just a fake bot that tronics paid for, then tell me how your supposed to download anything from the google docs, because this guy may SEEM smart with his arduino tutorials, but he doesnt know how to make a downloadable google doc
my "Arduino" folder is missing, i tried reinstalling the IDE, resetting the rduino, re installing the port. but i can no longer recover it - please help
Depending on your Arduino board, you may have a dedicated slot for SCL and SDA, I ran into the same issue, connecting the LCD to these instead of A4/5 brought up the address.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
This helped me soo much. I finaly found a true indian that has the voice crystal clear and makes good tutorials! You just gained a subcriber!
Thanks a lot for your appreciation my friend. This is a great encourage for me as a content creator who creates videos with less resources. By the way I am a Sri Lankan. Not an Indian.☺
@@tronicslk oh cool
@@That_alexgtnz ❤️❤️❤️❤️
he is no indian buddy he is sri lankan!
Thanks, took me a while to get the library in the right place on my MacBook but once I did my display works like a dream.
Thank you so much for you help, i was stuck for an entire week yet deadline for my project presentation was closing in. Watching this video has helped me a lot to identify my lcd which was 0x3F yet my code was showing 0x27. I was really stuck. You deserve more views and subscribers.
Thanks a lot my friend. These comments are really encouraging me for future videos. Stay tuned by subscribing the channel ❤️
thank you very much my brother from Sri Lanka was very helpful👍
I'm learning arduino
I'm from Indonesia👍
Thank you my friend. Its so nice to hear from u 😍
After spending lots of time on RUclips your video actually got it to work! Thanks so much
Thank u ❤️
ARE YOU KIDDING ME?? I just spent half an hour soldering headers in my display and now that i watched your video i realised that i should have soldered this black thing instead, i feel like having a beer
❤️
same here :(
@@Kevin.Samuel 😂
Hey, this is the best Indian tutorial i've ever seen on Arduino! Your voice is crystal clear (unlike others) with easy to follow explanation! I hope in the future your channel would be more popular than now.
Hi. Thank you very much for your comment and it will be a great encourage for me. However i am from Sri Lanka and not from India. ♥️♥️♥️
This is so good! The company I use for my Arduino uno doesn’t seem to have pontentiometers
Thanks
Thank you. Its a great motivation for me ❤️
First Super Thank Recived for the channel ❤️❤️❤️
Your video helped me a lot troublshooting the lcd display..
After spending lots of time on RUclips your video actually got it to work! Thanks so much😊
Reply
Thank you! I finally got my display working thanks to your very helpful video. I am a total beginner and there is a lot of bad information about the i2c display but your video finally has my display working 😀
Glad I could help!
Really it helped a lot❤thank you for the detailed video😊
My pleasure 😊
The photo of the cursor location 0,0 1,0 etc. was very helpful thanks
this definitely the best video ever made on LCD screen working, thank you alot.
Glad it helped
Subbed! Thanks for your tutorials!
thank you friend
Very clear explanation brother
Thank you❤ From🇱🇰
thank you friend 🥳
Extraordinary! Very useful without problems! Greetings from Ecuador!
😍😍😍
Thank you so much for the library and tutorials, it was really helpful indeed🎉
Amazing Tutorial. Thank you 😍
This was so useful! I thought my lcd was broking and it was just the brightness lol
thank you 😇
Amazing Tutorial. Keep it up. Thank you🤩
Very helpful. Thank you sir.
THANK so much your tutorial is just perfect
You're welcome!
you saved me ..thanks big bro ..i give you a like and subscribe ....thanks a million
Hello, I have a great interest in electronics and I want to reach the stage of inventing and producing a board. Therefore, I have studied Electronics 1 & 2 and Electrical Circuits 1 & 2 at university, but I feel like something is missing from my knowledge. I kindly request you to explain to me the map, path, and way to become a PCB designer from beginner to advanced level. I kindly ask you to tell me what I should learn from the beginning to the end in order
Hey, nice tutorial! Does it work with 3.3v?
LCD needs 5V
This was really helpfull thank you
Thank you sooooooooooooooo much bro you healped me thank you soooooooooo much
Hi, thank you so much for the video. I managed successfully.
Very useful, thank you friend! I only had issues with contrast, bu easily solved by turning the potentiometer on the i2c module! I also forgot to solder the SCL wire😂
You are welcome my friend
NICE PRESENTATION ,PRECISE...!!!
Thank you friend 😍
I made distance measuring with ultrasound sensor ,less than15cm, turn on led otherwise off,but led flickers if distance more than 15cm,plz can u suggest something
you are him bro thanks so much new suscriber
I'm in a project. My load cell is connected to HX711 amplifier.. and HX711 is connected in the Arduino UNO's 5V pin. I have 16X2 Blue Backlight LCD Display
Is it okay if I HX711 to 3.3 V or is it okay to change the Serial Interface (12C) to 3.3 V..
Thank you for this ❤ but my problem now is I don't know how connect this to my piezoelectric it is working fine.
Can you help me please 😭
Can we use arising nano instead of uno
You are the besttttt thanks for help
Hello, it works if i use a rgb led too ?
Very good description
facial and voice recognition based security and safety system in car.
Can we do by using arduino.
Can you help me do this project with the source codes..
on the 5V i already have a temperature sensor what should i connect vcc to then can you please calrify
You have to use same 5V by splitting the line through a breadboard or something like that ❤️
Great video❤
Hello sir i have problm may lcd is one collom only display in the bar collom..
In Arduino there is no library folder while pasting the file
how to solve this problem?
im facing this code after uploading
Sketch uses 4032 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 522 bytes (25%) of dynamic memory, leaving 1526 bytes for local variables. Maximum is 2048 bytes.
did you end up fixing it? im having the same issue
Nice explanation
Can it load images?
hi,can I ask?why when I upload LCD code it show 'class LiquidCrystal_I2C' has no member named 'init'
Use begin instead of init in your code
thank you bhai helped a lot
what if the lcd only displays for a second and stops completly?
what if I use another module that also uses sda scl, for example tea5767 fm radio how write the code?
can use without any issue
@@tronicslk glad to heard that, tx u
Does it work with Teensy?
Hello sir is it compulsory to shoulder the I2C MODULE WITH THE LCD DISPLAY
Its optional ✌️
@@tronicslk but when i connect the 12C module it does not turn on the LCD DISPLAY
What's the name of the thing that connect the LCD with I2C ?
Can I connect SCL and SDA with other than A4 and A5?
No
Hi... I'm using Arduino IDE 2.2.1. As you know the software is different. I'm unable to find a library folder in the installation folder. Also when using i2c finder, I don't get the location as well. Can you help.
Try to install library using library manager option in IDE. Its easy
hi i tried doing that but still same error pls help@@tronicslk
could you please tell me how you did it?
Amazing tutorial
Hey can you provide me with code ro display date and time with ds3231 and lcd
Man you are the best .
May I know if this works with Arduino Mega 2560? Thanks!
Yes. Use correct sda and scl pins of it
This is the problem on the LCD 2004, the backlight and white cubes, but the Arduino does not see the I2C module. how can this issue be resolved?
Watch again carefully. Need to match i2C address and rotate potentiometer
I'm trying to initialize my LCD, but it says that the library has no member called init() . I used the exact same code that you showed on the screen.
Hello i need help, i have freenove arduino uno with a different lcd display than this. lcd name as i can see is "EONE LCD" i dont have the same library as yours but it seems my library works ok. Im getting "Problem uploading to board" error whats the solution?
verygood👍👍
👍👍👍
Thnk you 🔥
ciao. non so potresti aiutarmi, mi hanno regalato una board simile arduino ma a bordo un atmega 64 ho visto il tool di arduino uno mega ecc.. non e' supportato, comunque mi sono messo alla ricerca e finalmente con una interfaccia isp di pochi euro riesco a programmarlo. il problema e che in rete non trono nulla riguardo utilizzo porte analogiche e protocolli i2c per dispay e lcd , mi potresti aiutare tu con qualche esempio sempre se puoi ..grazie Francesco
good job man :))
Love u bro
hello , in my ardino the memory is very less so how to install another code in it
Reset it with the butten
i downloaded the i2c address finder from the link you provided and extracted it but it didn`t show the arduino code and the file type is INO files and the size is 1kb and it can`t be opened please help it urgent
Great video fried
Hi sir, can I use the code for esp8266?
In my poject I Made a Visitor counter but The display showing boxes not showing text how to fix
Did you follow full steps?
Super
Hey if your not just a fake bot that tronics paid for, then tell me how your supposed to download anything from the google docs, because this guy may SEEM smart with his arduino tutorials, but he doesnt know how to make a downloadable google doc
my "Arduino" folder is missing, i tried reinstalling the IDE, resetting the rduino, re installing the port. but i can no longer recover it - please help
Nothing appears on the LCD screen yet, what is the reson??
Did you use any code?
If everything is done according to video, ur components might not working
where can we by this converter
bro in my pc it is showing no I2C found . even my lcd diplay light up
Check wiring
Why I can't found the i2c address when using Arduino mega 2560, I need help
how can i change location of A4 and A 5
Actually you cant
bro, why is mine saying "Compilation error: LiquidCrystal_I2C.h: No such file or directory" when i try to upload the code?
Need to install library
Hello, how do we use the LCD screen with on/off switch. Thanks
simply use it as a power switch
@@tronicslk Unfortunately, when we turn it on again after turning it off, it does not work.
@@omerucansu2569 turn off the Arduino. Power the LCD with Arduino 5V pin as shown in video
where is library folder cant \find
THANKS BRO
i cant include the file in my coding, ive been following your instruction carefully and nothing works
What happens?
Hello mate ... ALL the Library you provide are EMPTY - Missing Content ...
My lcd screen does not show Hello World instead shows H then T and S. How should I fix it?
is everything okey according to tutorial ?
@@tronicslk Yes I followed the instructions but only the initials of "Hello World, This is a lcd, and Screen test" appear on the screen
Same problem
Makasih my brother
❤️
Lcd kitne rupees ka hai
this has no meaning to new versions as i dont have the Arduino file at all even tho IDE is installed and so i cant do anything
Bro for me i2c scanner scanning only appearing I'm using 8,2 lcd
Same here have uh got ny solution ??
most eaisest explanaition
Thank you for your valuble comment 😍
well done
Big thank to you
Thank you
Could you help me with my issue? It says 'No I2C devices found' when I run address finder.
I have the same problem
@@mikefarrell3739 It turns out my error is rusting jumper cables.
A new set of jumpers solved my problem.
Depending on your Arduino board, you may have a dedicated slot for SCL and SDA, I ran into the same issue, connecting the LCD to these instead of A4/5 brought up the address.
@@mikefarrell3739 Check my response to alexwyne814 about the LCD address issue
thx man
❤️
no text shows up for me why is that
it shows up now but only some letters are normal and rest are some foreign letters
👌👌👍
thank u
thans supar
❤️❤️❤️
Compilation error: no matching function for call to 'LiquidCrystal_I2C::begin()'
Use init instead of begin