I got a 07 Lexus ES 350 and I want some new Brembo rotors and pads but when I put my car in on their website it says they don’t make anything for it then I put in the 08 Lexus ES 350 and up came the rotor and pad sets that they sell. They’re basically the same car so they should fit right??
Help! I got all 4 brakes pads replaced with dealer parts on my ‘09 ES350. I’ve started having clunking noise from the front right wheel. What could that be? The pins, clips or shims? One mechanic told me it’s the pins or clips, but when I inquired from the dealer they said they don’t come separate but with new brake pads. Apparently, they must’ve been replaced when I got the job done. What should I do about it? It’s so annoying to hear the clunk whenever I apply brakes.
Well, as suspected. I went to another mechanic, he checked the rotors at the lathe shop they said the rotor was uneven. I got it resurfaced and installed. The noise was gone. Today, after almost 2 months, the noise came back. 🤷🏻♂️
@@HowToDoitright definitely I always pull the pins clean the pins and holes then add brake slide to slider pins and back of pads. The only thing I can figure is the hub assembly went bad wouldn't be the first time
I have done many brake jobs Camry,coralla,Saturn,Honda the rears on this car the front pads are impossible to install just crap I will get my brakes done on this car from now on not easy
@@HoodsGlobal ok I exactly know what you are talking about. So yea if you notice I started the video with drivers side but then when I jumped the video to passenger side where I mentioned that I forgot the pins on other one. We actually went bad and reinstalled the pins we forgot. But the video didn’t show that. I mistakenly endup showing the installation of the drivers side where we forgot the pins but it was corrected at the end. Editing issue lol sorry
I got a 07 Lexus ES 350 and I want some new Brembo rotors and pads but when I put my car in on their website it says they don’t make anything for it then I put in the 08 Lexus ES 350 and up came the rotor and pad sets that they sell. They’re basically the same car so they should fit right??
Yes should fit without issues. Try other brand in another site so double check for both models but I’m sure it’s same.
Had da same issue
Can u use brembo brake pads on regular stock rotors on a Lexus fsport 2021??
Yes
What size are the screws ? Mine are missing for the rotor and they wobble
No idea. It’s been a while I did the job. Also every car and model is different so you better check with Lexus parts.
Help!
I got all 4 brakes pads replaced with dealer parts on my ‘09 ES350. I’ve started having clunking noise from the front right wheel. What could that be? The pins, clips or shims? One mechanic told me it’s the pins or clips, but when I inquired from the dealer they said they don’t come separate but with new brake pads. Apparently, they must’ve been replaced when I got the job done.
What should I do about it?
It’s so annoying to hear the clunk whenever I apply brakes.
Take it Back to who replaced it. It must have done a bad job. Clunking noise is not good at all.
@@HowToDoitright He says everything is fine
Well, as suspected. I went to another mechanic, he checked the rotors at the lathe shop they said the rotor was uneven. I got it resurfaced and installed. The noise was gone. Today, after almost 2 months, the noise came back. 🤷🏻♂️
May know the dram wheel how much price front side
Check their website
I didn't find the fronts hard to do but the rotors i installed have the rust coating and its rubbing against the pad and causing a whistle/squealing
Oh wierd. Hope you services the pins and cleaned and lubricated them.
@@HowToDoitright definitely I always pull the pins clean the pins and holes then add brake slide to slider pins and back of pads. The only thing I can figure is the hub assembly went bad wouldn't be the first time
Disc Brake Pad and Rotor Kit
NP-2753281-Kit
NP-1814315-Kit
Are brembo brake pads good im thinking about ordering some?
You should use the oem denso made in Japan 🇯🇵
@@lucast594 Denso doesn't make brake pads and rotors. Toyota brake parts are manufactured by advics and akebono
Appreciate the video but we need to see you doing the actual work, not after the fact explanation. It may be easy for you.
Good point I’ll keep that in mind in next video 👍
What was the company's website name that you ordered the kit from?
Brembo.com. Their Genuine website.
I have done many brake jobs Camry,coralla,Saturn,Honda the rears on this car the front pads are impossible to install just crap I will get my brakes done on this car from now on not easy
I just did it. Why’s it impossible
****You forgot the pad pin...
Huh? Where at? I used all the pins if you see my video in detail
@@HowToDoitright The coat hanger wire thing that releases the pads from the rotor when foot is off the break pedal. Two on each side, top and bottom.
@@HoodsGlobal at what time frame do you see I missed it?
@@HowToDoitright I didn't see it when you put on the caliper.
@@HoodsGlobal ok I exactly know what you are talking about. So yea if you notice I started the video with drivers side but then when I jumped the video to passenger side where I mentioned that I forgot the pins on other one. We actually went bad and reinstalled the pins we forgot. But the video didn’t show that. I mistakenly endup showing the installation of the drivers side where we forgot the pins but it was corrected at the end. Editing issue lol sorry
Those are now made in China
Ahh didn’t know. Still good quality though. I love them.
@@HowToDoitrighthow are the pads compared to OEM? I keep reading that the brembos make a bunch more brake dust.
@@bb5op585I love them honestly. Really perform well