Flower pot heater

Поделиться
HTML-код
  • Опубликовано: 22 янв 2025

Комментарии • 110

  • @oli230
    @oli230 2 года назад +6

    Thats about the best design I have seen, it's functional and looks good. The way things are going with utility prices we are all going to be making these. Thank you.

  • @cindycuypers5183
    @cindycuypers5183 3 года назад +11

    Thanks so much, this is definitely the best design I've found. I immediately went to the store and made two of them; a smaller one and a bigger one. Then using them for the first time, I found out that you must not move the thing once it's burning. I also found out that the metal eye on top will get very hot too ha ha! So be careful with that!

    • @JCL-nu4ge
      @JCL-nu4ge 3 года назад +1

      How much this everything cost you to make?

    • @loissmith4123
      @loissmith4123 Год назад

      Oven mitts or potholders next to the heater would be a must...also a cookie sheet to lay it on to blow out flame.

  • @lenniewatson687
    @lenniewatson687 3 года назад +3

    I like that you put the loop on the top outside of the pot. I'd like to get one ready in case the power goes out.

  • @darrentaylor3371
    @darrentaylor3371 2 года назад +1

    i like that idea. looks so much more stylish than most of these heaters i`ve seen. i`m going to give this a go.

  • @ghostyty3071
    @ghostyty3071 3 года назад +1

    I like your design, best out of all I have seen

  • @MikeKollin
    @MikeKollin 5 лет назад +9

    That's Awesome... Love that design!!

  • @Eternauta37
    @Eternauta37 2 года назад +1

    Je connaissais depuis longtemps la technique .
    J'avoue qu'ici, secure- elegant- portatif !!!!!

  • @Warmsunset26
    @Warmsunset26 7 лет назад +3

    Actually, well done. Omen of the BETTER designs I have seen using this concept.
    👍🏼👍🏼 Nice one.

  • @robertbennet1784
    @robertbennet1784 8 лет назад +1

    I just built it for a boy scouts trip. Can't wait t use it. Great video!

  • @loredanalinden1958
    @loredanalinden1958 2 года назад +3

    There's a video of a sailor who almost burned her boat down.
    I don't know who originally started the trend of blocking off the hole at the top in order to create a work of art. It's a simple version of a convection heater. However if you block the top hole the heat is trapped, temperature rises and you create a potential incendiary device.

    • @mutleyeng
      @mutleyeng 2 года назад

      yeah, i like the design, one of the better simple to make ones, but if i make any i will definitely drill a few holes in both pots for the hot air to escape - maybe opposing each other between the two pots

  • @harleyjanice1
    @harleyjanice1 2 года назад

    Best video of this type I have watched. Thank you

  • @topgun4229
    @topgun4229 2 года назад

    Best design I ever seen !! thx bro !

  • @jeffhaddox2239
    @jeffhaddox2239 3 года назад +7

    I like your design, but I think I would get a larger diameter base, too make it more stable.👍

  • @az1317
    @az1317 3 года назад +1

    Beautiful design. Thanks for sharing.

  • @delagum1
    @delagum1 2 года назад

    Man, I’m subscribing! Great vid, thoroughly enjoyed it. Peace

  • @6kidsand8cupsofcoffee
    @6kidsand8cupsofcoffee 4 года назад +20

    Can u add a shopping list I like to try this for an upcoming camping trip

    • @VictoriaNakaraKizer
      @VictoriaNakaraKizer 3 года назад

      Get a Mr.Buddy heater for camping. It is for indoor/ tent use…

    • @lotjes9290
      @lotjes9290 2 года назад

      Please don’t these things are really dangerous

  • @yvonneholder273
    @yvonneholder273 3 года назад +1

    I want 2 of those !!!!

  • @rickybaby69
    @rickybaby69 2 года назад

    Excellent presentation

  • @loissmith4123
    @loissmith4123 Год назад

    Electrical rates have almost doubled in Richland WA due to some "new" projects. People are protesting (real) & taking pitch forks to city hall... (not real) I am investigating how I can at least stay warmer in the afternoons in my small apartment. Two of these with Crisco shorting candles would burn for 6 ++ hours for just pennies. Safety is a big issue I would put them on a cookie sheet with a ceramic tile under that. Never leave them alone. Going to the garbage bin, I would lift the lid blow them out. Never sleep with them going. Thanks for the video.

  • @sweetsavorywords3506
    @sweetsavorywords3506 3 года назад +9

    Love the handle. Make sure you Don't tight your nuts to much on the pots, they expand, might crack you pot

  • @6kidsand8cupsofcoffee
    @6kidsand8cupsofcoffee 4 года назад +1

    This is the best one

  • @toml.8210
    @toml.8210 2 года назад

    I suggest using epoxy (J.B. Weld) to lok the screws and nuts in place.I glue the washers too.

  • @drrobotnikmeanbeanma
    @drrobotnikmeanbeanma 2 года назад +2

    Them flower pot heaters needs thicker richer flames for it to work.I would avoid using Tea Light candles.Its a video called "The Ultimate Flower Pot Candle Heater-DiY Radiant Space Heater" He use some type of cotton to get better flames vs them tea light candles.And try using Corded In-Line Duct Fan from the Home Depot or something to circulate the heat.

  • @tanzidaify
    @tanzidaify 3 года назад

    Very good design

  • @veronicalogotheti5416
    @veronicalogotheti5416 2 года назад

    Very nice
    Thank you

  • @Lenasantana1
    @Lenasantana1 8 лет назад +2

    Awesome!!! Thanks a lot, God bless you:)

  • @apologistasdelevangelio4945
    @apologistasdelevangelio4945 3 года назад

    Gracias por enseñarnos. Thank you for teaching us.

  • @JCraftvfx
    @JCraftvfx 3 года назад +1

    excellent design. I've seen other videos where they add a few nuts and washers , stacking them on the inside.(nut, washer, nut, washer...) it's suppose to help put out more heat? Would be cool to see a test to see if that is correct

  • @L2design
    @L2design 4 года назад

    THATS SUPER CUTE!!!!! thank you! you should sell them too

  • @ImeiHo
    @ImeiHo 6 лет назад

    Looks nice !

  • @ScientistPrepper
    @ScientistPrepper 3 года назад

    Really good video. thanks.

  • @msPlums7
    @msPlums7 8 лет назад +5

    What sort of metal is that rod? Some are zinc and others are,,, What metal will get the hottest? And how long is the rod for the six inch pot?

  • @truthforever2479
    @truthforever2479 6 лет назад

    I made one, the candle tray and pot not aligning properly. What could be the reason??

  • @kinabravo8266
    @kinabravo8266 6 лет назад

    Absolutely love

  • @rhondaadams4013
    @rhondaadams4013 3 года назад

    Cute!

  • @debbiejohnson9866
    @debbiejohnson9866 3 года назад

    thank you!!

  • @vogeltik
    @vogeltik 3 года назад +7

    Mine caught fire. I bumped it and the tea light wax spilled and caught flame 🔥 the bolt to stop it from going to high you might want to reconsider. If it should catch fire you can cut off the oxygen easy by pushing that piece up.

  • @dboots133
    @dboots133 4 года назад

    thank you

  • @beritblackie3168
    @beritblackie3168 2 года назад +1

    Does anyone know how long the steel rod is? 😊

    • @otsoni03
      @otsoni03 2 года назад

      12 inches i.e. about 30 cm.

  • @mattgreen9323
    @mattgreen9323 8 лет назад +1

    awsome I got one made but yours look perfiict im going to make mine look like yours toorrow imma go to the store and get the parts good job

  • @Powerful1776
    @Powerful1776 6 лет назад +1

    Does the Eye bolt ring get to hot to touch?

    • @yokohamamike1041
      @yokohamamike1041 3 года назад

      Absolutely, which, imo renders this design both dangerous and faulty.

  • @maximus3843
    @maximus3843 8 лет назад +2

    how u deal with the co2 ,in a room not ventilated for 24hrs?

    • @iptvservicero1524
      @iptvservicero1524 7 лет назад +2

      ventilate it :))))

    • @NANA4bacon
      @NANA4bacon 7 лет назад +3

      if you are using 4 tiny candles you don't need to worry, place a co2 sensor near by you will see it wont set it off

  • @AndreaM77
    @AndreaM77 3 года назад +1

    Shopping list plz? 😊🙏

  • @johncashmere5112
    @johncashmere5112 3 года назад

    Thanx for sharing.

  • @toml.8210
    @toml.8210 2 года назад

    You can use otdinary drill bits; but be careful not to chip or break the pots.

  • @bln3576
    @bln3576 8 лет назад +4

    WANT MORE HEAT ADD ABOUT 6-10 LARGE FLAT WASHERS ON THE INSIDE. IT WILL RADIATE HEAT LONGER AND HOTTER.

  • @TheNafigs
    @TheNafigs 2 года назад

    Are the temp inside safe for galvenized steel?

  • @silviubotonog2302
    @silviubotonog2302 2 года назад

    With oil is super. Not smoke

  • @BBBYpsi
    @BBBYpsi 7 лет назад +5

    Need to make one of these for my P/U truck. I haul travel trailers with my dually truck & have the front seat & back seat taken out & made a tiny bed in back to sleep in. I have plywood on the floor in front laying level . This could heat up my truck while I am sleeping on those cold nights in the winter months. Does it admit any Carbon monoxide?

  • @socorrohernandez650
    @socorrohernandez650 3 года назад

    How efective is this? How big of a room can get warm?

  • @VictoriaNakaraKizer
    @VictoriaNakaraKizer 3 года назад

    Made mine tonight…

  • @JahleeyahKalonji
    @JahleeyahKalonji 3 года назад +4

    I wish you had a list so it's easier to buy the items needed

  • @ra8620
    @ra8620 2 года назад

    I just made it today

  • @carlthornton3076
    @carlthornton3076 2 года назад

    Very Good!... 80 🐄🦉🏴‍☠✝

  • @zamarycoromoto8678
    @zamarycoromoto8678 7 лет назад

    Fantástico... grácias

  • @lindam.9282
    @lindam.9282 3 года назад +2

    What would keep the melted wax from leaking down out of the dish you have the candles in through the hole with the rod and bolt? This could cause a flash flare if it did. That would be a bad thing.. I love these and thought about making one, but this concerns me.

  • @TraceyMush
    @TraceyMush 4 года назад +1

    "Warsher" sounds like you come from Manitoba?

  • @33piolin
    @33piolin 6 лет назад +2

    I love the design of your flower pot heater. As I was ready to proceed with making one, I thought that maybe this wasn’t a good idea for my camping. I have COPD and wouldn’t this type of heater suck the oxygen out of the closed-tent environment?!?

    • @vogeltik
      @vogeltik 3 года назад +2

      You should use bees wax. Its not poisonous.

    • @VictoriaNakaraKizer
      @VictoriaNakaraKizer 3 года назад +2

      You need a Mr. Buddy heater for camping. Safe for indoors…

  • @MrDanbecker
    @MrDanbecker 6 лет назад

    Great job .. Thanks .. :-)

  • @lindaburks8855
    @lindaburks8855 6 лет назад +1

    You showed how you put it together, but you never showed us how it worked with the candles in it & if there was any heat coming out???

    • @johnannaburke1625
      @johnannaburke1625 3 года назад

      It works i have not tried this design. But plate pennies and tea candles with clay pot

  • @Victor-ko8ei
    @Victor-ko8ei 3 года назад

    Está chingón

  • @crisantavlogs7991
    @crisantavlogs7991 8 лет назад +1

    Hi can you pls tell me all of the stuff you bought thnxz

  • @bob2sticks
    @bob2sticks 6 лет назад

    ......what square footage will it heat and what was the maximum temperature ? Thanks , GRIZZ

  • @cbzombiequeen58
    @cbzombiequeen58 8 лет назад

    what lengh is the 3/8 rod. I couldn't find one that was short so I had to get a 2 ft. and cut it

  • @yvonneholder273
    @yvonneholder273 3 года назад

    Crickey you have a business there

  • @RobertPunt
    @RobertPunt 8 лет назад

    Movie Maker if you have a windows PC

  • @antonisignatiou1095
    @antonisignatiou1095 8 лет назад +1

    what kind of metal the screw has to be. Galvanized , stainless steel?

    • @rosieking383
      @rosieking383 5 лет назад

      Any

    • @garden209
      @garden209 3 года назад

      @@rosieking383 No, not galvanized. Stainless steel is best.

  • @iloncam.a.7702
    @iloncam.a.7702 3 года назад

    Echt leuk, dank je wel.

  • @mwardy1980
    @mwardy1980 3 года назад

    put a stove fan on top see what that does

  • @feth7747
    @feth7747 2 года назад

    The present and the future of house warming, overal here in Europe.

  • @olgabeatrizbustamante2809
    @olgabeatrizbustamante2809 4 года назад

    BIEN

  • @sandrospano2657
    @sandrospano2657 5 лет назад +2

    Great idea., just like the other 20 people who have invented the same gadget or so who claim to get heat out of four candles with clay pots. In reality, burning three candles to get heat costs more than an Space Heater. 30-12 hours candles cost about 15 dollars at Walmart. If you burn just three candles a day, that makes 30 candles every ten days, it will cost you 45 dollars a month, and you don't have to worry about burning candles every night.

  • @kevinaalberts9251
    @kevinaalberts9251 3 года назад

    prove it....!!

  • @fromtheabyssthelightshines8618
    @fromtheabyssthelightshines8618 2 года назад +1

    Warning mine went on fire after 4 hours black suit everywhere

  • @TestingPyros
    @TestingPyros 3 года назад

    Get VSDC and clip out the time that you spent spinning the bolts down. Here is some video that I made about these using this program: ruclips.net/video/A9P7A5aq3ZA/видео.html

  • @billymoretz2292
    @billymoretz2292 2 года назад

    Thats all wrong the larger pot needs a open hole otherwise it wil not work !!!

  • @laratiara1
    @laratiara1 2 года назад

    Do keep in mind, the oxygen level will drop, so open a window. ( No, not windows10 ;-))

  • @TomokoAbe_
    @TomokoAbe_ 6 лет назад

    very nice! And I think you are a very attractive man...

  • @SuperDrumdrumdrum
    @SuperDrumdrumdrum 2 года назад

    Bullshit total energy 1 candle= 20W

  • @sebestyenszaby
    @sebestyenszaby 2 года назад

    Justlight the candles, with or without the flowerpots the candles emit the same amount of heat, buying pots is just throwing money down the window. Anyway human stupidity is limitless, it's impossible to heat a room with some candles!!!!!

    • @christophermichael2233
      @christophermichael2233 2 года назад +1

      Your parents & society has failed you 😔...I don't blame you & your simple mind ....one day you'll figure it out ...keep trying champ

  • @cdirks1
    @cdirks1 2 года назад

    This ofcourse doesn't work