I really like this one! Perhaps you can make some Star Wars droids in a similar way? I was thinking of droids like the B2 super battle droid, droideka, DSD1 dwarf spider droid, crab droid, …
parts list from: " Kaylee 11 days ago (edited) In hopes of making my husband a little kit to build these, I attempted to make a parts list on my own using LEGO's Pick a Brick page on their website. You should be able to copy paste the names below right into the search bar (minus the number and color - that's just how many and what color the creator used). I'm sure you can substitute whatever colors you want. Hopefully it's mostly correct: * MINI FIG. BACK PLATE W. KNOB (3 BLACK) * PLATE 1X1 W/ HOLDER (1 WHITE/GRAY) * PLATE 1X1 W. UP RIGHT HOLDER (1 BLACK, 6 WHITE/GRAY) * BRICK 1X1 W/ HOLDER, VERTICAL (1 BLACK) * PLATE 1X1, W/ 1.5 PLATE 1X1, UPWARDS (1 - BLACK) * PL.ROUND 1X1 W. THROUGHG. HOLE (1 BLACK, 2 WHITE/GRAY) * PLATE 1X1 ROUND W/ HORIZONTAL 3.2 SHAFT (1 BLACK) * PLATE 1X1 ROUND W/ 3.2 SHAFT (1 BLACK) * TECHNIC BRICK 1X1 (1 BLACK, 1 WHITE/GRAY) * STICK Ø 3.2 W. HOLDER (2 BLACK) * TAP Ø4.9/6.4 (2 BLACK, 2 WHITE/GRAY) * LAMP HOLDER (1 WHITE/GRAY) * PLATE 1X2 W. 1 KNOB (1 WHITE/GRAY) * PLATE 1X4, W/ 2 KNOBS, NO. 2 (1 BLACK) * BRICK 1X1 W. HANDLE (1 BLACK) * ROOF TILE 1X1X2/3, ABS (8 WHITE/GRAY) * BRICK 1X1 W. 1 KNOB (1 WHITE) * PLATE 1X2 W. STICK (2 WHITE/GRAY) * PLATE 1X1 ROUND (1 BLACK, 1 WHITE/GRAY) * BRICK 1X1 W. 4 KNOBS (3 BLACK) * FLAT TILE 1X1 (1 BLACK, 5 WHITE/GRAY) * PLATE 1X1 (6 WHITE/GRAY) * PLATE 1X2 (1 BLACK, 2 WHITE) * FLAT TILE 1X2 (1 BLACK) * 4.85 BUSH FRICTION W/ KNOB (1 RED) * MINI UPPER PART, NO. 5244 (1 WHITE/GRAY) --> I couldn't find the two white hand looking parts, so I figured you could use this and remove the hands Again not sure if this is 100% correct, but it's the closest I've got! "
Sorry Ian Walker, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Sorry, juan ig...unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Sorry CementAirBag, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Like these very much I did some similar designs but used L brackets for the body/chest, a cone for the face, and then rocket cones for the feet, sort of like bell bottom feet 😊 Then a much larger over the shoulder canon and radar dishes for shoulder pauldrons
Man, now I just wish there was an itemized list for the parts so I could hop on one of the Lego aftermarket sites to buy enough parts to make a small mech army.
@@hanburgundy4317 not really effective for some of the more obscure pieces here unless you’re familiar with the piece names already. Most people don’t know the names of the Lego pieces by shape.
Sorry, Loli-Knight Xardej...unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Man... i would have lost my mind for something like this when i was a kid, i just wish i could get a part list to have a go at it @_@ has anyone actually recreated some of these?
Thanks and sorry DrNever92, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
@aksukage You shouldn't need to lol Just match the piece to the picture. If you don't have it, go to the Lego store or order em. I just use my collection or buy stuff from Walmart.
![[LEGO Mini Robot Tutorial] Transformer Robot - mini figure vehicle (LEGO mech)/ミニレゴ変身ロボ/미니 레고 변신로봇](http://i.ytimg.com/vi/bd7-fivL47M/mqdefault.jpg)
Nice! Fits the "Mobile Frame Zero" size scale perfectly.
Thankyou, Jeremy Springfield 😊😊😊
I really like this one!
Perhaps you can make some Star Wars droids in a similar way? I was thinking of droids like the B2 super battle droid, droideka, DSD1 dwarf spider droid, crab droid, …
That would be an interesting idea, thank you man 👍😁
@@KosBrick no problem bro. Marry Christmas!
@@yarnickgoovaerts who’s Christmas and why does he have to marry her
parts list from:
" Kaylee
11 days ago (edited)
In hopes of making my husband a little kit to build these, I attempted to make a parts list on my own using LEGO's Pick a Brick page on their website. You should be able to copy paste the names below right into the search bar (minus the number and color - that's just how many and what color the creator used). I'm sure you can substitute whatever colors you want. Hopefully it's mostly correct:
* MINI FIG. BACK PLATE W. KNOB (3 BLACK)
* PLATE 1X1 W/ HOLDER (1 WHITE/GRAY)
* PLATE 1X1 W. UP RIGHT HOLDER (1 BLACK, 6 WHITE/GRAY)
* BRICK 1X1 W/ HOLDER, VERTICAL (1 BLACK)
* PLATE 1X1, W/ 1.5 PLATE 1X1, UPWARDS (1 - BLACK)
* PL.ROUND 1X1 W. THROUGHG. HOLE (1 BLACK, 2 WHITE/GRAY)
* PLATE 1X1 ROUND W/ HORIZONTAL 3.2 SHAFT (1 BLACK)
* PLATE 1X1 ROUND W/ 3.2 SHAFT (1 BLACK)
* TECHNIC BRICK 1X1 (1 BLACK, 1 WHITE/GRAY)
* STICK Ø 3.2 W. HOLDER (2 BLACK)
* TAP Ø4.9/6.4 (2 BLACK, 2 WHITE/GRAY)
* LAMP HOLDER (1 WHITE/GRAY)
* PLATE 1X2 W. 1 KNOB (1 WHITE/GRAY)
* PLATE 1X4, W/ 2 KNOBS, NO. 2 (1 BLACK)
* BRICK 1X1 W. HANDLE (1 BLACK)
* ROOF TILE 1X1X2/3, ABS (8 WHITE/GRAY)
* BRICK 1X1 W. 1 KNOB (1 WHITE)
* PLATE 1X2 W. STICK (2 WHITE/GRAY)
* PLATE 1X1 ROUND (1 BLACK, 1 WHITE/GRAY)
* BRICK 1X1 W. 4 KNOBS (3 BLACK)
* FLAT TILE 1X1 (1 BLACK, 5 WHITE/GRAY)
* PLATE 1X1 (6 WHITE/GRAY)
* PLATE 1X2 (1 BLACK, 2 WHITE)
* FLAT TILE 1X2 (1 BLACK)
* 4.85 BUSH FRICTION W/ KNOB (1 RED)
* MINI UPPER PART, NO. 5244 (1 WHITE/GRAY) --> I couldn't find the two white hand looking parts, so I figured you could use this and remove the hands
Again not sure if this is 100% correct, but it's the closest I've got! "
Would love to see you make some of the Macross mechs like this!
Someday I will, since Macross is already on my list...and thanks for the suggestion, McStebb 😊😊😊
Merry Christmas🎄❄❄⛄☃
Thankyou and Merry Christmas to you too Kyle 😊🎄🎉
Hope to see some Gundams, is complicated but shall be worth it
I will, just stay tune...thanks for the suggestion 😊😊😊
Looks great mate!! Will check out more from Suspended's account :D
Thanks bro, yes...he has a lot of awesome and inspiring works 😁👍
I like these, kinda remiscient of the Leo from gundam wing
Thankyou 😊
YO LEGO!!! HIRE THIS DUDE! Sooooo many people would BUY this!!!
Thankyou my man Jake Hart 😊😊😊
@@KosBrick you let us all know if you get any word from Lego! I'd buy one of these in a heartbeat! Break a leg dude
I'd love to see some armored core stuff in that scale, awesome work!
There you have it:
m.youtube.com/@MishimaProductions/videos
@@guilhermecaiado5384 thanks m8
Thankyou dead_spaz 😊😊😊
Yep calling for a parts list too! Please provide a parts list Id love to order parts specifically for builds like this
Sorry Ian Walker, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Will you consider posting the piece list on future videos
Sorry, juan ig...unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Nice work! I was curious if it'd ever be possible for us to get a parts list for everything you used in the build?
I was hoping for a parts list too!!!
Parts List Please or provide a Kit
Did you not watch the video?
Sorry CementAirBag, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
@@40zed what video
Few bricks, small yet very detailed and totally cool looking. Thumbs up from me!
Thank you so much 😀
Like these very much
I did some similar designs but used L brackets for the body/chest, a cone for the face, and then rocket cones for the feet, sort of like bell bottom feet 😊
Then a much larger over the shoulder canon and radar dishes for shoulder pauldrons
That would be cool Eliot Hochberg 😊😊😊
I agree with scoot you should definitely do all of them I would really appreciate it thanks
Ryan Bai 👍👍👍😊😊😊
@@KosBrick thank you so much
Man, now I just wish there was an itemized list for the parts so I could hop on one of the Lego aftermarket sites to buy enough parts to make a small mech army.
Pause the video when he shows the pieces for each section.
@@hanburgundy4317 not really effective for some of the more obscure pieces here unless you’re familiar with the piece names already. Most people don’t know the names of the Lego pieces by shape.
@@CoastToGhost
I don't either, but you can match em with your collection, grab em from a Lego store, or order em online.
Sorry, Loli-Knight Xardej...unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
looks more like a Tau mech from warhammer 40k but still cool build
Yes and thankyou OVERLORD 😊😊😊
nice god 👍👍👍
Thankyou Jeicob 😊
Wow, very cool. Thanks for sharing.
You're welcome T B and thankyou too 😊😊😊
Honestly this looks more like a Tau battlesuit rather than a zaku. Still a good design tho
You are right and thankyou, Axylum 😊😊😊
Me gustó mucho👏👏👏👏👍👍👍
I know you said they are Zaku inspired but to me they look alot like Heavy Gears. I like Heavy Gears.
Thankyou, starsiegeplayer 😊😊😊
Вау, очень круто!
かっこいいww
When I’m an adulte ima look back at this video and order a bunch peace’s you need then I’ll make an army!!!!
This is no zaku, boy!
Yes it's not, I write it as a Zaku inspired design style, not as Zaku 😊
@@KosBrick ah ok
I think this isn't a Zaku, but it's cool as an original robot!
These look more like the Gundam series Rick Dias or the Macross series Valkyrie.
Yes it's not, I write it as a Zaku inspired design style, not as Zaku 😊
I love the sound cut off lol
Thankyou Lolo 😊😊😊
bless you
Thankyou, Rusty Russull 😊😊😊
Man... i would have lost my mind for something like this when i was a kid, i just wish i could get a part list to have a go at it @_@ has anyone actually recreated some of these?
Thanks and sorry DrNever92, unfortunately I don't provide part list since it's too time consuming to make one, but you can see the parts needed in the video and pause it 😊😊😊
Shockwave!
Caio 😁😁😁
Thanks bro this is endspar me making robot gundam
You're welcome, gigabacon and thankyou too 😊😊😊
Master chief but in mech form pls
Thanks MarkshmelloMD 😊😊😊
Lindo canal, con que paciencia arma las cosas y como pone las partes de cada pieza para se puedan ver antes de armarlas. Es Genial.
what item number are those flat 1x1 brackets?
These look more like the Graze than the Zaku II
I am number one
Yes you are, congrats! 😊
Dude is it possible that I buy your Lego
I wish I had them!
You can buy Lego parts by piece at Bricklink.com store in your country, that's where I get most of mine. Hope it helps, Joseph Cayou 😊😊😊
I had a "*Suggestion*": can you make a lego mini drone mech. I would love it. And of course Merry Christmas everyone had a great day.
Merry Christmas too and thanks Reichilda, yes I will make mini drone mech in the future, thanks for the suggestion 😊
Cool thanks so much had a wonderful day :).
This music is kicking!
Who's the artist?
I'm sorry, innocentdemon87...I forgot what the name of the music I use there 😅😅😅
Good 👍👍
Thankyou 😊
❤
The mechs look like a tiny doom guy that are in a different color
Thanks, Pixart_King 😊😊😊
try to make a wkfdsjimyfvgrgbkysfogkrtttcoogxdjgbmjtrccccccccchkgirdodododododododododovtuhftlgfuycnjtcccvhntrvujdrxuky
wooly
kinda remind me of Warhammer 40k space marines
I'm planning to make 40k series too, so stay tune and thanks, D6 😊😊😊
Lego Micromachines made and mecs.. Would have collected the shit out of these when I was a kid. My 2 favourite childhood toys put together
I'm a dad and I still build Lego, why not 😊😊😊
Merry Christmas everyone
Merry Christmas to you too Hdog 😊🎄
yooo shockwave
leosaurio B3 😁😁😁
Can you imagine WH40K lego army?
That would be cool SlavStash 😊😊😊
no piece list ?
Just pause the video when he shows the pieces.
@@hanburgundy4317 bruh
@@aerobladee
Wdym, "bruh,"?
@@hanburgundy4317 like i know the name or number of every piece he shows
@aksukage
You shouldn't need to lol Just match the piece to the picture. If you don't have it, go to the Lego store or order em. I just use my collection or buy stuff from Walmart.
they’re actually closer to Leo’s than Zaku’s
What is Leo?
@@KosBrick a mobile suit from Gundam Wing
😊😊😊
Gracias...ya lo hice en gris
Compa pasate El nombre de Las piezas o El kit que tenias para armar uno, por favor
You're welcome Enrique Zamot and thankyou too 😊😊😊
the legs are similar to the rx77 mini mech leg design
Yes it is, you can mix and match between the legs, torso, heads and arms with them all, because they all made using the same scale :)
yooo nice@@KosBrick
Actually looks a lot more like Variable Fighters from Macross.
Thanks and you're right, TakCWAL 😊😊😊
Friend, Your Mechs Were Very Cool HEY, THEY'RE SELLING YOU THE DESIGN OF YOUR MECHS ON Aliexpress
Really cool build! But hard to see the model as you are building as you are blocking view with your fingers a lot!
My bad...and thanks for the constructive input Wasted Space with Brock Hauser 😊😊😊
Keep up the good builds!
Where can you purchase these bricks?
You can buy Lego parts by piece at Bricklink.com store in your country, that's where I get most of mine. Hope it helps Shiro DX 😊😊😊
MINI MECHAS
Yes and I love them 😊
Mobile frame zero?
Yes but with my own mech design in this, rshawninc 😊😊😊
SPACE MARINE
That would be cool apersonwhoexists 😊😊😊
@@KosBrick it was a Warhammer 40k reference
Ah yes I'm the 2nd one
No, you are 3rd and congrats! 😁👍
no green version :(
Because Lego has a very limited part variation in green color and they don't produce alot of green pieces needed for this build, kidrobot 😊😊😊
@@KosBrick oh really? i did not know that!
Tiny hands 🤗
😁😁😁
They look more like rick dias to me…
Thankyou, 5B09 LEUNG YIU CHO 😊😊😊
Looks more like a tau battle suit lol
Thankyou and a lot of people said that too, LoliMaster 69 😊😊😊
ok cool but where's the lego eva
What is eva?
@@KosBrick the mechs from neon genesis evangelion
Bonjour j’aimerai acheter les lego pour mon fils. Vous pouvez me renseigner s'il vous plaît. Merci
more like Tau units from WH40k
Yes it is, thankyou, Voltic 😊😊😊
thats no zaku boy... no zaku !!!!!!!!
Yes it's not, what I mean is I use Zaku design style as the reference kiki. 😊😊😊
That's good but ain't a Zaku
Yup it's not, what I mean is just using Zaku design style as the reference 😊 😊 😊
amazing, please can you make a mech from Macross Robotech, will be fantastic, like and sub
It's already on my list, just stay tune and thankyou for the suggestion, axel 😊😊😊
Tau
Yes and thankyou ユリの花 😊😊😊
Mobile Frame Zero ? Anyone...
AaronAlso 😊😊😊
The Waffle House Has Found Its New Host
Thankyou, TechnoXander40 😊😊😊