You already know that I bought the previous version but an update is not bad either. I still love your work and I don't miss a detail. I'll wait for the bayonet and sight for the version I have, which I hope will be compatible so I can complete it. Thanks a million for your work.
yes, I remember. Compatible bayonet need to update a small part. You can download the latest version of the model . Just update the corresponding parts 😉
I found that the block you used at 0:48 (a1-3.stl) is nearly a millimetre too wide to connect the two pieces together. I checked in a 3D model viewer and confirmed the STL itself is incorrectly sized. This isn't a huge issue overall and I'll just fix it myself on my end, but for a $20+ model, it's an enormous oversight.
@@zvc_3DPrint I can't find your email in your contact information to do that, but all I did to get it to work on my end was change a1-3.stl to be ~11.3mm thick instead of 12.3mm and it all fit well after a small amount of sanding.
@@zvc_3DPrintYeah I’m printing the same block right now and it’s way too wide to fit in the main buttstock. Edit: The rear-most large buttstock piece needs a 11.5mm piece but the block is 12.35mm
You’re 3D Prints are amazing, can’t wait to see the SKS rifle!! I assume you get requests to design specific firearms all the time and if it’s okay I’d like to list a few that I really like to see you make. 1. M3/M3A1 Grease Gun 2. MP40 3. Lee Nenfield rifle 4. 38 Special revolvers (various sizes) 5. E11 Stormtrooper blaster 6. Lewis Gun 7. MG34 or MG42 8. Mosin Nagont 9. Gewehr 43 10. Uzi
I love your designs. I have purchased all of them. If you allow me some suggestions for your next designs, I would ask you to think about the SIG SAUER P226 pistol and the classic M16 + M203 rifle that appears in the PREDATOR movie.
@@zvc_3DPrint Sorry if I'm a bit clumsy, but I'm just starting out in the world of 3D printing. What parameters do you use for the printer (filling, quality and speed mostly). And, where do you find such a variety of springs? Thanks again
Please make a 3d printed toy carcano cavalry carbine with the en bloc clip and the folding bayonet like the real one,im italian and that would be so much cool for me,even because there aren't toy carcanos
@@zvc_3DPrint Have you thought about your next 3d firearm project? Ideas: AS Val, Vz. 58, Sten MK2 (w/ or w/o suppressor), SVT-40, Martini-Henry Rifle and so on.
why? i am going to either wait until christmas for a 3d printer or going to buy files and have a company make the parts for me. my own printer is ideal but the company would be quicker.
@@zvc_3DPrint what does that mean? Due to limited personal time the forum will be stopped registration and maintenance. In order not to waste your points, we will permanently close the forum in 30 days. 😅
i love the new design, but the front part which locks the wood together is too basic, the part which is used to dissasemble the bolt on the centrepart of the of the stock is way too small, and so are the sights, there are a few more things which are wrong but overall great work!
@@zvc_3DPrint Thanks! But I have one question with your 3d prints I I buy your k98k will that give me the file to 3d print it? (I’m new to it so sorry if this seems like a dumb question)
@@ComanderPotato yep after successful payment, you will receive the stl file. Feel free to ask me if you have any difficulties in the printing process.
@@zvc_3DPrint thanks um also do you have any recommendations for a company I can get to print it? I heard there like places where they will print the stuff for u
Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
Do you plan to build an m16 with m203 grenade launcher? Predator is a good example.
A Sig Sauer P226 would also be fine.
You do an incredible job.
cuando entro a la página me dice que el foro se cambiara en 30 dias, que ago?
@@ztaya1780 That is a reminder that the forum is no longer maintained. The buying model is still valid
Where do you get springs from?
@@bigmari20 Part of the Amazon. Particularly small one need to be acquired offline.
bayonet and scope will be updated next
Could you please also make a front sight cover please? I know this is meant to be an early Kar but it would be nice
Hey what song did u use for this video?
Based on my model which is free on grabcad
No doubt there is some work on STL file, but credit the people you are making money on, the 3D design is from me and the loader from Lukasz wilk !
Can you do a trench magazine please
Pov: it's bedtime and you put on your favorite toy gun maker to go to sleep to.
The music is so peaceful.
Best music used so far on these vids
Awesome work! Would love to see a StG 44 made by you.
YES we need one please
You already know that I bought the previous version but an update is not bad either. I still love your work and I don't miss a detail. I'll wait for the bayonet and sight for the version I have, which I hope will be compatible so I can complete it. Thanks a million for your work.
yes, I remember. Compatible bayonet need to update a small part. You can download the latest version of the model . Just update the corresponding parts 😉
@@zvc_3DPrint Muchas gracias 🤩
@@zvc_3DPrint Roughly how long did all the parts take to print?
Now this, it's spot on, Great inprobment, love your work!
When you load the rifle with a clip can you just move the bolt forward to eject the empty clip without removing it from the rifle?
I was wondering the same thing. I’m printing this project rn to find out.
a m82 50 cal. would be cool
Congrats on the 100k subscribers, been here for 1 or 2 years.
been forgetting more things these days
I hope I dont have alzheimers
I found that the block you used at 0:48 (a1-3.stl) is nearly a millimetre too wide to connect the two pieces together. I checked in a 3D model viewer and confirmed the STL itself is incorrectly sized.
This isn't a huge issue overall and I'll just fix it myself on my end, but for a $20+ model, it's an enormous oversight.
Can you email me a screenshot? I will check and fix the problems you mentioned
@@zvc_3DPrint I can't find your email in your contact information to do that, but all I did to get it to work on my end was change a1-3.stl to be ~11.3mm thick instead of 12.3mm and it all fit well after a small amount of sanding.
@@Sean_735 It may be that our printing orientation is different, resulting in some tolerances. Anyway,congratulations your problem is solved
@@zvc_3DPrintYeah I’m printing the same block right now and it’s way too wide to fit in the main buttstock. Edit: The rear-most large buttstock piece needs a 11.5mm piece but the block is 12.35mm
@@TheKingOfHeartsIV I will check this issue.
I would love to see this adapted to fire pop caps
Very good but you make kar98k scope and bayonet I like that vedio
I am your new subscriber
I like your all the vedio 7:15 7:15 7:15
thank u for ur support😉
looks great.
Hi there, excellent work. Detail is exceptional.
Andrew Nz
😉
@@zvc_3DPrint thanks for your reply.
I've sent you an email
I'm interested in buying the software.
Thanks .
Andrew Nz
I've printed the M1, SKS, and Kar for my son, and the KAR is by far my favorite.
thank u for ur support🙏🏻😉
Are you perchance looking for another son? /j
How long did it take to print all the parts? I mean only the printing part, not assembly
about 100 hours
Do a stg 44 gun that would be awesome
You’re 3D Prints are amazing, can’t wait to see the SKS rifle!! I assume you get requests to design specific firearms all the time and if it’s okay I’d like to list a few that I really like to see you make.
1. M3/M3A1 Grease Gun
2. MP40
3. Lee Nenfield rifle
4. 38 Special revolvers (various sizes)
5. E11 Stormtrooper blaster
6. Lewis Gun
7. MG34 or MG42
8. Mosin Nagont
9. Gewehr 43
10. Uzi
thanks for your suggestion😉
PLEASE make at least the mp40, Lee Enfield, Lewis Gun, and a mg42.
Skip the uzi but the rest, sure
Yes!it finally here!
Impressive work
You forgot to add the spring that’s in the stripper clips to keep tension on the bullets while in the clips
👍yep
This is goodness kar98 i see😊😊❤❤
you should model these with a 6mm barrel and use modified cartridges that fire a bb with standard caps.
A version like this may be made in the future
@@zvc_3DPrint nice, can't wait
what are the print settings?
Buying multiple of your files in about 2 minutes!
SO DOPE AND COOL next can you make a mg08 PLEASE PLEASE
Have you made a Sig Sauer M17?
nice a new video this is awesome!
Now you gotta make the smle Mk3
Are you able to put the bullets back on the clip?
I have seen vids where u are able to do so.
There are also 2 separate files for the bullet, and clip so youhave to be able to do so.
Is it rifled?
Can you make a video of how all the springs were made plz? Itz kinda hard if I just make all the springs of your mp5 without a tutorial.
Small springs are not made by themselves. found in old electrical appliances
@@zvc_3DPrint so i can get all the springs i need to build ur gun from the kit?
Is it really life size
yep
@@zvc_3DPrintgreat now I know that I can fit my bayonet.
I love to see you make the FN FAL
Wich 3D printer capacity is requiered? For the print bed. 220x220x250? Is this enough
That's enough. My printer is like this
@zvc_3DPrint
When will you introduce a Mosin Nagant?
I kind of want to see a G98 now... Maybe a Label too.
I love your designs. I have purchased all of them. If you allow me some suggestions for your next designs, I would ask you to think about the SIG SAUER P226 pistol and the classic M16 + M203 rifle that appears in the PREDATOR movie.
Thanks a lot for the support. Next update zh304
Why two tipes of clip in the files? (one seems a little curved). Thanks a lot
Yes, there are two styles, see which one you like.all can be used
@@zvc_3DPrint Sorry if I'm a bit clumsy, but I'm just starting out in the world of 3D printing. What parameters do you use for the printer (filling, quality and speed mostly). And, where do you find such a variety of springs? Thanks again
Layer Height 0.15 Speed 50 Fill 40-60% Temperature 190 pal I got springs from broken appliances
Is this build it yourself? Or custom print it yourself, bc I’d love to buy one of these and have it shipped, assembled to me
sorry only sell stl file 🙏
Вот кстати вместо(пластмассового капсюля) можно поставить пистон))И будет стрелять))
Ill buy model for my 3d printer....
🙏
Please make a 3d printed toy carcano cavalry carbine with the en bloc clip and the folding bayonet like the real one,im italian and that would be so much cool for me,even because there aren't toy carcanos
Do you sand the parts before showing them because they don’t have any of those lines whenever you finish a 3d print
yes needs to be polished
Is this designed only for the 3d printed rounds or could this be used to fire NERF style darts?
Unable to launch
What ringer do u have
next model could be the spas 12?
sorry
Real (wood from wwii) stock will fit to these 3d printed parts?
There may be some tolerance
@@zvc_3DPrint Ok. Thx for answer :D
Can you print galil?
hello. Is it possible to make a Soviet PTRH-41 anti tank in 3D?
Sorry doesn't have this plan at the moment. so big😅
Can u modified the bullet with added cap from cap gun so it can firing blank bullet?
Well, your idea is very good. I will try it future 👍
So, what would be your next project? Is it a remodelling for the old models or is it a completely new gun?
Need to update zh304 because that model has many bugs
@@zvc_3DPrint Have you thought about your next 3d firearm project?
Ideas: AS Val, Vz. 58, Sten MK2 (w/ or w/o suppressor), SVT-40, Martini-Henry Rifle and so on.
no aparece en el cults? como lo busco?
cults3d.com/en/3d-model/game/kar-98k-zvc0430-2
That's great. I like it, I want it, but I don't think so.
why?
i am going to either wait until christmas for a 3d printer or going to buy files and have a company make the parts for me.
my own printer is ideal but the company would be quicker.
what 3d printer should i buy
I am using ender 3 v3, but I think all current printers can handle it 🙂
can you make an 3d printed IMI GALIL ARM ???
What did you use as reference for this?
Free model pictures and videos
About how much plastic does this model use?
about 500g-800g
@@zvc_3DPrint Wow that sounds way lower than I thought from the size.
Which scale? And how long can this product be purchased?
1：1 Always available
@@zvc_3DPrint what does that mean?
Due to limited personal time the forum will be stopped registration and maintenance. In order not to waste your points, we will permanently close the forum in 30 days. 😅
@@sk1ppie506 Go to the bottom link for cults.
I hope you make Lee enfield oneday
will be made future
Make an M3A1 Grease Gun or an Mg42 Please.
YES, MG42 would be miracle.
Gewehr 98 pls next !
sorry.no plan for this yet
Where do you get all the springs, and what are all of the exact sizes?
The size of the spring is introduced in the video
is there anyprice for student
Hello there!Please tell me how to purchase a 3D model of the Clock17 pistol from you?
bbs.gunsstory.com/forum.php?mod=viewthread&tid=1258&extra=page%3D1
At 1:37 I am unable to make it snap in as you did, how can I fix it?
There's a card slot there.
@@zvc_3DPrinthow do you also keep the ejector in tension?
Where do you get the 1mm diameter spring. I can’t find it online 😢
Is this life size? If so I can fit my bayonet.😊
there will be tolerances
Where do I find the springs for the riffle
after updating make mp40 model please
Where did you download the files?
Google Search free models. Then modify and redo it yourself.
are these going to be in the same place as before? i bought your old version of the 98k
I also have the previous version, I think I should buy the current one
Use the previous link to get the latest model
@@zvc_3DPrint thanks!
Smg next like a tec9?
i love the new design, but the front part which locks the wood together is too basic, the part which is used to dissasemble the bolt on the centrepart of the of the stock is way too small, and so are the sights, there are a few more things which are wrong but overall great work!
Great job!😍
PA12 Materials??
pla
Oh yeah, it has finished
whew can I find the 3d print online?
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models
@@zvc_3DPrint Thanks! But I have one question with your 3d prints I I buy your k98k will that give me the file to 3d print it? (I’m new to it so sorry if this seems like a dumb question)
@@ComanderPotato yep after successful payment, you will receive the stl file. Feel free to ask me if you have any difficulties in the printing process.
@@zvc_3DPrint thanks um also do you have any recommendations for a company I can get to print it? I heard there like places where they will print the stuff for u
@@ComanderPotato I didn't. You need to find your local printing service for this.
Hi the piece d6 is not the same that you show in your video, d6 is a bit large
Could you send me a picture to illustrate?Preferably shorts。zvc0430@mail.com
does it fire
No the barrel is solid
Is there a way to get a pre printed version?
sorry u need to find a local printing service provider yourself 🙂
@@zvc_3DPrint dang well worth the ask but still amazing stuff man
Can u send me a pre boot one I can pay double
Where can I get the file?
bingdelengku.github.io/
please make the operator of valorant
Hey i from banjarmasin can't you kar98k 3d printer in here
I don't know what you mean😲
holaaaaa quisiera adquirir los planos de la impresión 3d del kar 98k
bingdelengku.github.io/
Go musket
Im generally q big fan of yours. But the stock and trigger guard look all wrong.
It may be that my reference is somewhat inaccurate😓
relevant in Russia, I'll probably print it out for myself.
Покажи весь свой арсенал!
What are those things called 5:51
amzn.to/39exw34
Stripper Clips… that’s it
3D print a spas-12
I wish this was free tbh
why buy these models if they are freely available?
Where?
If so I'd like to know too, ha
@@richardvanstraaten8091 Grabcad
Please, copy cz 457, thank you!!
next sks 😉
It's a ghost gun
A guy with an airbrush could age it and detail it to pass for an original at ten feet.
Nagan m1895 .tt33
can you gift template free for everyone
sorry 🙏
Can you give me one for free please 🙏.Im a subscriber and i like all you videos.
sorry 🙁
@@zvc_3DPrint Why men please
como haces los rifles tutorial
Can you do an free gun please, for Kids 😢
Stop begging
MAKE IT 10001010101100110011010101001010100 DOLLAR
Cry about it, or steal mom credit card and got punishedl