Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Can you tell us what size the tires are and if you have had any clearance issues (fender contact)? Thanks! Looks good too!!
275/55/20 bfgoodrich AT2, no tire rub at all
I have an SUV. I want to do the same thing. What size adapter are you using?. Is it 1 3/4 , 1 5/8 or 2?
Have you put weight on truck? Or hauled trailer? After installing spacers?
Yes all the time
Have you had any issues with the adapters? If I use a 2inch adapter would I have to cut the studs?where did you buy them?
i still have them on two trucks, and have had zero issues. if you use 2" no studs need to be cut. i got them on ebay. they were reasonable.
Torque on oem wheels should be 140FT pounds , do these adapters specify 90ft pounds ?
No I was told by discount tire the tq spec was 90
Do you have to use a spacer in order to mount those wheels. Or will they fit the stock bolt pattern
the oem 20" wheels in the video are 8x180mm , yes you need adapters
Awesome! Great video! May we use some clips for our website? Thanks !
Yes
Plz credit Fab’n Okies on RUclips, Thank you
Do you have a link for the adaptors you used
They are on ebay
I see front spacer don't has lips in the hub is safe thanks
I have been running these spacers/adapters for over 100,000 miles with no issues
What brand adaptors are you using
i dont know the brand, but i got them off of ebay.
But please use glasses for you 👀 thank you
Thank you
Lug nuts are SAE 7/8".not metric
My truck is metric, if yours is saw then it is an older truck
Sae
@fabnokies whatever fits the tightest is the best I just find that 22mm is very close to 7/8
Update??
Daily driven with no issues
so you are worried about unplugging the grinder to replace the cutting wheel but not wearing safety glasses while grinding? SMH
i usually wear safety glasses, and do advocate wearing them. i agree with you. Thank you for the constructive reply.
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Can you tell us what size the tires are and if you have had any clearance issues (fender contact)?
Thanks! Looks good too!!
275/55/20 bfgoodrich AT2, no tire rub at all
I have an SUV. I want to do the same thing. What size adapter are you using?. Is it 1 3/4 , 1 5/8 or 2?
Have you put weight on truck? Or hauled trailer? After installing spacers?
Yes all the time
Have you had any issues with the adapters? If I use a 2inch adapter would I have to cut the studs?where did you buy them?
i still have them on two trucks, and have had zero issues. if you use 2" no studs need to be cut. i got them on ebay. they were reasonable.
Torque on oem wheels should be 140FT pounds , do these adapters specify 90ft pounds ?
No I was told by discount tire the tq spec was 90
Do you have to use a spacer in order to mount those wheels. Or will they fit the stock bolt pattern
the oem 20" wheels in the video are 8x180mm , yes you need adapters
Awesome! Great video! May we use some clips for our website?
Thanks !
Yes
Plz credit Fab’n Okies on RUclips, Thank you
Do you have a link for the adaptors you used
They are on ebay
I see front spacer don't has lips in the hub is safe thanks
I have been running these spacers/adapters for over 100,000 miles with no issues
What brand adaptors are you using
i dont know the brand, but i got them off of ebay.
But please use glasses for you 👀 thank you
Thank you
Lug nuts are SAE 7/8".not metric
My truck is metric, if yours is saw then it is an older truck
Sae
@fabnokies whatever fits the tightest is the best I just find that 22mm is very close to 7/8
Update??
Daily driven with no issues
so you are worried about unplugging the grinder to replace the cutting wheel but not wearing safety glasses while grinding? SMH
i usually wear safety glasses, and do advocate wearing them. i agree with you. Thank you for the constructive reply.