My Zonda did the same thing when I got it, I had to reverse the throttle direction on the transmitter. Then it worked perfectly, don’t give up on it, mine absolutely screams. Do the OSE one piece shafts and bigger props and it will scare you!
On the fly sky gt3 that comes with the Zonda you have to scroll to REV. And you can choose the channel for throttle and change the direction. If it’s in reverse put it in forward. If it’s in forward put it in reverse.
Hope you have figured it out by now. Had the exact same problem with the Seaking 120 ESC. You will have the same issue on your Pursuit. Instructions are misleading on the throttle range adjust. Follow the 'Futaba' instructions. You must reverse the throttle channel, do the calibration and then try it out. Next you have to reverse 2 motor leads if they are turning the wrong way. Make sure that both props turn inward and that the flex cables turn the right direction.
There is nothing wrong with your esc. Install the props to spin Outward. Set throttle channel to NORMAL. Check if props are spinning in the correct direction if not flip any 2 motor wires. AND IT WILL FLY!!!
That's exactly what mine did when I binded my FlySky Noble and before and receiver to this boat. It automatically put it on beginner which puts everything at 50% throttle and I thought the boat was broken but then it took off like a rocket once I switched it off. I do think his boat is not calibrated properly though even though this is a 2-year-old video
How long did you wait to recieve it ? I have 1 on order ...... Possibly need to program the endpoints ? I hear 6s a prop change, 1peice driveshaft and water cooling upgrades . look up mrmad , secret squirrel and rc dude . they seem to answer questions . oh and the way the props and shafts work they have to be installed properly . angle of props should be same as shafts . and i think the props are clockwise and counter clock wise . i have a m41 . it took 300 400 in cooling upgrades to safely run ...... Stick with this boat ....... You dont have to remove the whole drive to remove the shafts .... Look for those people i suggested on youtube
@@jaycevessier7554 yup it wasnt fun . other than that . great boat . adds up fast unfortunately . shes definitely pumping the water now . before it was all leaking into the boat as heat and pressure built it got worse . every rc needs upgrades . now it can be bashed around or maxed out and stays cool enough to keep your fingers on the electronics as long as you wish . before any upgrades you be burnt pretty good. M41 has its known cooling issues . and when you change 1 thing you gotta change 10 more ...... Great boat once again . you can get by with the aluminum water jacket and dual pickup . but still be around 70-100+ all said and done with cheaper quality parts . batteries get pretty toast though so id also suggest the bat cooling plates .... Add more costs now nore lines pickups and outlets . 😆 change 1 add 10 more
My friend I have the same exactly boat that I also bought from banggood.com. Came in late because it was out of stock. Once it came out available it arrived safe and sound. I replace the the rudder for double pick up wich is a must I would say. DONT GIVE UP ON THIS BOAT! THIS BOAT! IT IS AWESOME AND FAST! Keep checking things like drive shaft that works outwards on the TFLs check the angles on the drive shafts the teflon tubing inside and the conncetion on the motor. Of course check the ESC( imien came in correctly programmed). Contact the Chow Ken on facebook they will help you. He is the employee for the owner of the TFL boats. Took me a while to get my Zonda ready to go and I am still work on it. Dont go Traxxas M41 or Spartan it is a lower level fror the Zonda. I have the M41 and Spartan and as I have the Zonda the traxxas boats feels like for beginners. And by the way they have plastic haul not fiberglass like the zonda.
My Zonda did the same thing when I got it, I had to reverse the throttle direction on the transmitter. Then it worked perfectly, don’t give up on it, mine absolutely screams. Do the OSE one piece shafts and bigger props and it will scare you!
I think you have the answer. Hopefully he figured it out
how did you reverse the throttle direction on the transmitter?
On the fly sky gt3 that comes with the Zonda you have to scroll to REV. And you can choose the channel for throttle and change the direction. If it’s in reverse put it in forward. If it’s in forward put it in reverse.
@@natenaylor5009 im about to order the TFL Genesis or Zonda and hoping i dont run into this problem...... thats why i was asking
@@bigesrcs5467 ya it’s a very easy fix don’t let it stop you from getting one they absolutely fly, and with a prop change they can go even faster!
I had the same problem. I program the ESC and then I got speed.
Buy the Hobbywing ESC Program Card.
Hope you have figured it out by now. Had the exact same problem with the Seaking 120 ESC. You will have the same issue on your Pursuit.
Instructions are misleading on the throttle range adjust. Follow the 'Futaba' instructions. You must reverse the throttle channel, do the calibration and then try it out. Next you have to reverse 2 motor leads if they are turning the wrong way.
Make sure that both props turn inward and that the flex cables turn the right direction.
There is nothing wrong with your esc.
Install the props to spin Outward.
Set throttle channel to NORMAL.
Check if props are spinning in the correct direction if not flip any 2 motor wires.
AND IT WILL FLY!!!
Niiice i like velcro for the hatch
Did you get it to work right?
Ask for help but not replying to anyone
Are your props on the right rotation? And rotation of motors ?
It might be on a training mode
That's exactly what mine did when I binded my FlySky Noble and before and receiver to this boat. It automatically put it on beginner which puts everything at 50% throttle and I thought the boat was broken but then it took off like a rocket once I switched it off. I do think his boat is not calibrated properly though even though this is a 2-year-old video
Try to switching the plugs on the esc to motor
Guyana or spektrum
How long did you wait to recieve it ? I have 1 on order ...... Possibly need to program the endpoints ? I hear 6s a prop change, 1peice driveshaft and water cooling upgrades . look up mrmad , secret squirrel and rc dude . they seem to answer questions . oh and the way the props and shafts work they have to be installed properly . angle of props should be same as shafts . and i think the props are clockwise and counter clock wise . i have a m41 . it took 300 400 in cooling upgrades to safely run ...... Stick with this boat ....... You dont have to remove the whole drive to remove the shafts .... Look for those people i suggested on youtube
Lmfao $300 in cooling upgrades on your m41? That’s bullshit lol
@@jaycevessier7554 yup it wasnt fun . other than that . great boat . adds up fast unfortunately . shes definitely pumping the water now . before it was all leaking into the boat as heat and pressure built it got worse . every rc needs upgrades . now it can be bashed around or maxed out and stays cool enough to keep your fingers on the electronics as long as you wish . before any upgrades you be burnt pretty good. M41 has its known cooling issues . and when you change 1 thing you gotta change 10 more ...... Great boat once again . you can get by with the aluminum water jacket and dual pickup . but still be around 70-100+ all said and done with cheaper quality parts . batteries get pretty toast though so id also suggest the bat cooling plates .... Add more costs now nore lines pickups and outlets . 😆 change 1 add 10 more
Been trying to contact u, pls hit me back. Don’t know if you erased my messages
Calibrating remote
My friend I have the same exactly boat that I also bought from banggood.com. Came in late because it was out of stock. Once it came out available it arrived safe and sound. I replace the the rudder for double pick up wich is a must I would say. DONT GIVE UP ON THIS BOAT! THIS BOAT! IT IS AWESOME AND FAST! Keep checking things like drive shaft that works outwards on the TFLs check the angles on the drive shafts the teflon tubing inside and the conncetion on the motor. Of course check the ESC( imien came in correctly programmed). Contact the Chow Ken on facebook they will help you. He is the employee for the owner of the TFL boats. Took me a while to get my Zonda ready to go and I am still work on it. Dont go Traxxas M41 or Spartan it is a lower level fror the Zonda. I have the M41 and Spartan and as I have the Zonda the traxxas boats feels like for beginners. And by the way they have plastic haul not fiberglass like the zonda.
Hey I recognize you name from either IG or my YT channel, yeah def need to help this guy get ripping
@@naveda08 I am subscribed to your channel at YT friend! Keep up with the good stuff!