Hello, what is the actuator min position and fail direction of Perkins 4.4twgm generator? The fuel pump is Delphi dp210. The setting value is min & fail CCW. I don't understand the current set value. If it's ccw mode, I think it's max fuel position.
I solved it. Your video helped me a lot. It was very difficult because the setting values of the two generators of the same model were different. After testing the actuator alone with a function generator, I understand how it works. When the fuel pump rack moves to the front (clockwise), it is in the "FUEL STOP" state, and on the REAR (counterclockwise-FREE) side, it is in the "FUEL FULL SUPPLY" state.@@benzblogsVlogs
Hola gracias por compartir yus conocimientos. Yo tengo un generador donde el pin numero 6 tiene coneccion directa con en pin numero uno de alimentacion de baterua ... ¿ Que funcion cumpliria esta alimentacion en el pin numero 6 ?
@@thuybui-wd9zu i am also facing the same problem we brought the new actuator but engine is satrting but the engine shutdown immediately what is the problem
We are trying tô install an lseries actuator, but even with the correct supply voltage, we are not able tô connect the actuator tô the computar, even with the wire conector from the supplyer, do you know what could bê?
Good afternoon We bought a new actuator, but when we connect it to the generator, it does not work like the old one and does not allow the generator to start. actuator 8404-1001. What could be the problem?
Buenas noche. Tengo un problema de configuarcion de ganancia cuando le doy carga al generador no me compensa. Me pide una contraseña mi L-serie me puede ayudar
Sir just simple go and check the enjection pump if this is convertable in 50-60 hz thin if its ok thin do conguration for the lseries if you want 60 hz just follow that bedio and its work
@@benzblogsVlogs the motor generator is at 1800 rpm 60 hrz with a delphi dp210 pump the L series actuator was stolen we recently acquired 1 but we do not have the calibration file for that actuator, the engine is a perkins 1104 turbo
Great job thank you brother.... Correct password... Big thanks from Algeria....
Wc
Nice Vlog Patuloy lang ♥️
Thank you
Good job lods tuloy lang pangarap
Oo lods
Hello, what is the actuator min position and fail direction of Perkins 4.4twgm generator? The fuel pump is Delphi dp210. The setting value is min & fail CCW. I don't understand the current set value. If it's ccw mode, I think it's max fuel position.
Do one thing to make it easy if you have flash file direct flash thin reset it its gone
I solved it. Your video helped me a lot. It was very difficult because the setting values of the two generators of the same model were different. After testing the actuator alone with a function generator, I understand how it works. When the fuel pump rack moves to the front (clockwise), it is in the "FUEL STOP" state, and on the REAR (counterclockwise-FREE) side, it is in the "FUEL FULL SUPPLY" state.@@benzblogsVlogs
Hola gracias por compartir yus conocimientos.
Yo tengo un generador donde el pin numero 6 tiene coneccion directa con en pin numero uno de alimentacion de baterua ...
¿ Que funcion cumpliria esta alimentacion en el pin numero 6 ?
Numero 6 que functiom 50/60 swichable
Thanks dear
Thanks! How to config for Caterpillar 272-2223 Actuator?
What kind of actuator you have sor
@@benzblogsVlogs It is Caterpillar 272-2223 sir! It look like L Series.
@@thuybui-wd9zu i am also facing the same problem we brought the new actuator but engine is satrting but the engine shutdown immediately what is the problem
Galing
We are trying tô install an lseries actuator, but even with the correct supply voltage, we are not able tô connect the actuator tô the computar, even with the wire conector from the supplyer, do you know what could bê?
You ahould have the converter that to 232 to usb
In order to communicate
Good afternoon We bought a new actuator, but when we connect it to the generator, it does not work like the old one and does not allow the generator to start. actuator 8404-1001. What could be the problem?
Configuration
@@benzblogsVlogs What do we need to do to make it work?
@@benzblogsVlogs maybe you have a configuration file for 8404-1001? I'm ready to pay for it
@@ИванИванов-ч2в6ц how u flash without the tools for config
Dear, can you send me a working diagram of Governor Perkins 1105 programmer? Thank you.
The picture itself is diagram
Hello ,
Where do I download the software from? It's not on the site ! can you send it to me ?
Internet go to woodward there u can for free
@@benzblogsVlogs Unfortunately, the file is no longer on the site.
Can you send me a link
Buenas noche. Tengo un problema de configuarcion de ganancia cuando le doy carga al generador no me compensa. Me pide una contraseña mi L-serie me puede ayudar
Is it q free software or need licence or some kind of registerations
There are two 1 by regeatration and 2 is the licence
Sir how confurigetoin this gawarnar wich saftwear use how connection leptop pliz tell me sir all information
The software we are using for this is hainzman for lseries actuator
How to communicate from laptop to actuator
@@sugrivkumar1552 use the lseries connector to communicate
I am asking for lepto to gawerner comnicetion cabals connection
Pliz I am not andartend u confurigetoin for dse ya gawerner pliz sir pliz pliz pliz give me your WhatsApp number
for the problem of RPM slowly dropping when given a load, where is the setting?
What engine pls
Perkins
What kva
100kva
Perkins 6TG2AM
bro expain about deep sea full wiring of engine and panel board
Take a look with the basic programing wich there you can see too
But dont worry i try coz im have work you know im doing this extra time like my lunch time or break time i dont have lots of time to make it
Sir where I can get the software for config
Go to website from woodward there you can get
Is it free this software? If yes, share the link. If not haw we can buy by online?
No we need to contact the woodward
I saw free version is that a useful?
How to funfurigetion 7510 pliz
Dse
Sir can i see the picture you have back of your module good pectire full pic
Yes sir I have but pliz give me your WhatsApp number I send u sir
Sir pliz u give me watsap number aafter I am sending pictures pliz sir
How i send hear pic I dont no
i need de configuration file perkins 1104t 1800 rpm 60 hz please
Sir just simple go and check the enjection pump if this is convertable in 50-60 hz thin if its ok thin do conguration for the lseries if you want 60 hz just follow that bedio and its work
@@benzblogsVlogs the motor generator is at 1800 rpm 60 hrz with a delphi dp210 pump the L series actuator was stolen we recently acquired 1 but we do not have the calibration file for that actuator, the engine is a perkins 1104 turbo
@@enriquerojas9025 no need flash fiel jsut follw what i say juat so a configuaration
Sir.Venz paano makuha ang software niyan.?
Website lang ng Woodward
brod bens ano ang problema ng engine kung hard starting
Marami pwedi pwedi g hinangin try mong ebleed tapos open mo isa2 and fuel enjector kong may nalabas na fuel
Anong kva to electronics or conventional emgine
150 kva perkins pero ganon pa rinang sitwasyon hard starting pa rinbleed ko na siya
@@jaimetemplo3726 ganito sir check mo ang fuel somleniod if my supply
Kong my sypply din ang laeries mo
Just wiring diagram
It make you confuse coz we have deferent standards
How can i download software of L series 8404- 5004
Just go website for woodward there you can make your registration so you can install it
password please
Lseries password?
Password:Lserries01
@@benzblogsVlogs yes please