hi barry, good to hear again from you.., unfortunately my english is not the best one, otherwise my job has taken me over 30 years all of the world to the container and vehicle manufacturer side, but CUPPING is at the moment not understandable to me. please take another word may be... windows : sometimes i ask myself what can i do to get parallel a translation minimum to english version to my youtube canal, may be i succeed in future, because to be open i´m personally with my typical north german slang a little bit popular meanwhile but in english to do...i don´t know. back to point regarding question about windows : i just took the folie away form the covered ones both sides and the question came to me if additional side windows to prevent wind against your face during looky looky outside during driving by the locomotive drivers. but i didnt find a foto at the WWW which one shows in 1:1 scale GRAVITA equipped accordingly. so i decided to keep separate small vertical wind bumper away form side windows. i hope this wording is a little bit matching your question(s). MIKE
In my opinion, one problem with the coupling is that the diameter of the wire in the opening is too thick. I then tried to carefully grind it thinner. That made it better.
mike please tell me what you are doing with the cupping and windows good video
hi barry, good to hear again from you.., unfortunately my english is not the best one, otherwise my job has taken me over 30 years all of the world to the container and vehicle manufacturer side, but CUPPING is at the moment not understandable to me.
please take another word may be... windows : sometimes i ask myself what can i do to get parallel a translation minimum to english version to my youtube canal, may be i succeed in future, because to be open i´m personally with my typical north german slang a little bit popular meanwhile but in english to do...i don´t know. back to point regarding question about windows : i just took the folie away form the covered ones both sides and the question came to me if additional side windows to prevent wind against your face during looky looky outside during driving by the locomotive drivers. but i didnt find a foto at the WWW which one shows in 1:1 scale GRAVITA equipped accordingly. so i decided to keep separate small vertical wind bumper away form side windows. i hope this wording is a little bit matching your question(s). MIKE
@@mikeme6439 just write it and I can translate it.i was just wondering what you did with the curling and the window? thank you barry
@@mikeme6439 cupling on the front and the back you have pegs ? are you repairing something ?.
@@mikeme6439 I understand the windows.
In my opinion, one problem with the coupling is that the diameter of the wire in the opening is too thick. I then tried to carefully grind it thinner. That made it better.
Glückwunsch, sehr schöne Lok