This is an Incredible tutorial! I'm working on my end of year project, and honestly learned more from watching this one video, than I had from several months of learning about it in college. I had been struggling for over 2 hours, just to make 6 LEDs that can be turned on and off with certain conditions in place, but couldn't even get 1 LED on the breadboard to turn on! After watching this, within 10 minutes of tinkering, I got it working.
Thanks for your videos and your straight forward explaining style. For a first timer working with the board, I feel like I'm not making good connections. Is it possible to push too hard, and damage the metal strips underneath?
Pues no estaría de más un dibujo con la posición de los elementos porque yo no veo bien dónde van las patillas de la luz. La cosa es que no me funciona el invento :-(
It’s so stupid! Why would they say all the stuff is included and leave out stuff included in every project??? And then just to say F U, they never mention it in the book. So stupid
Месяц назад
they were included in mine, are you sure that you don't have them?
I used a 9v battery as input. Same circuit same 220ohm resistor but when I push the switch the LED not turn on. Removing the switch and close the circuit with a jumper, the LED turns on. Do I have a non functioning switch or what could be the problem? I tried more than one switch from the kit.
The model number Is K000007. This makes it simpler because you can just type in the model number followed by the word, "Arduino" on amazon and you get that kit!
First i was very confused because in the book there were resistors with only 4 lines and i thought, that these were the only ones with 220Ω. But otherwise great book and great video 👍
![VENEZUELA vs. ARGENTINA [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/SJfoPdeOPCQ/mqdefault.jpg)
This is an Incredible tutorial!
I'm working on my end of year project, and honestly learned more from watching this one video, than I had from several months of learning about it in college. I had been struggling for over 2 hours, just to make 6 LEDs that can be turned on and off with certain conditions in place, but couldn't even get 1 LED on the breadboard to turn on!
After watching this, within 10 minutes of tinkering, I got it working.
Such a great video! My just-turned-seven year-old just made his first Arduino circuit with your help. Thank you!
Oh wow, that's fantastic to hear Anita! Great work! What's he planning on building next?
I am getting an arduino kit soon, I will use these videos to help me!
Thanks for your videos and your straight forward explaining style. For a first timer working with the board, I feel like I'm not making good connections. Is it possible to push too hard, and damage the metal strips underneath?
I feel so cool right now :)
why
Not having the components symmetrically ordered kills me a little :))
this is really cool I am going to try it out myself!
PS - you should have made close up shots too.
Where do I find the instruction book?
Mine lights up, but doesn't want to do anything when I press the button. :(
make sure yours is connected to the 5V and the GND where the power is, not analog IN
Thank you!
Pues no estaría de más un dibujo con la posición de los elementos porque yo no veo bien dónde van las patillas de la luz. La cosa es que no me funciona el invento :-(
Which textbook where you referencing from?
yeah, which book is she rafering to
Great video!!
amazing
Why aren’t the jumpers included in the beginner pack????
It’s so stupid! Why would they say all the stuff is included and leave out stuff included in every project??? And then just to say F U, they never mention it in the book. So stupid
they were included in mine, are you sure that you don't have them?
Hello! I am an Arduino User and I am Working on a project in which I want to control a Arduino UNO and MEGA using single HC-05 Bluetooth
thanks for letting us know 🥴
I used a 9v battery as input. Same circuit same 220ohm resistor but when I push the switch the LED not turn on. Removing the switch and close the circuit with a jumper, the LED turns on. Do I have a non functioning switch or what could be the problem? I tried more than one switch from the kit.
i think atleast closing up the camera a lil bit is way more useful.
I have no idea to fix the problem out since Everything is quite messed up right now
Where can I buy a book Arduino for beginners?
What is the name and model of this kit? Do I can buy it
arduino starter kit for
The model number Is K000007. This makes it simpler because you can just type in the model number followed by the word, "Arduino" on amazon and you get that kit!
First i was very confused because in the book there were resistors with only 4 lines and i thought, that these were the only ones with 220Ω.
But otherwise great book and great video 👍
can you send about electronics & robotic details
Did not work
tried it but it did not turn on the LED
What is the price of the book ?
You have to buy a starter kit of it has a lot of components with it a great book also comes with it.
@@noobcraft5712 lo puedes descargar
mine won't light up :(
Mine won’t light up as well!! I don’t know why🥴
@@Qiwu369 Did you put the 220 resistor in place with the led?
Do you have online training
Sure thing, yep! We have Arduino Certification here: www.arduino.cc/education/certification
(And a lot of RUclips videos!)
@@Arduino Followed every step shown in the video but the LED does not light up, can you please help me with this?
How to get the project book?
im pretty sure you only get it if you buy the official Arduino starter kit, not from any other companies.
@@paulhuaylinos5065 really? Hmmm
@@PjGaming_000 puedes descargarlo
Didnt work for me
not my first circuit whit uno barduino
I Have This Things
I had male to male jumper wires
that didn't work
C A P
Is it necessary to have everything Arduino T shirt and cupboards full of Arduinos ????
Very ridiculous