Repair & Upgrade DAMAGED Bucket for 30T Excavator | Gouging & Welding

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 1,6 тыс.

  • @CuttingEdgeEngineering
    @CuttingEdgeEngineering  Год назад +287

    If it's not raining it's windy AF!! 😭Sorry about some of the audio when we were outside hopefully you can still hear the commentary ok 🥴
    Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳
    📲Follow us online here: linktr.ee/CEEAUS
    🛍Official CEE Merch shop: www.ceeshop.com.au
    🎉Get Early Access to videos in our Patreon community: www.patreon.com/cuttingedgeengineering

    • @Murphyslawfarm
      @Murphyslawfarm Год назад +27

      The audio is fine mates.

    • @ypaulbrown
      @ypaulbrown Год назад +14

      well alrighty now....cheeers form the other 'Sunshine State', Paul...best wishes K,K and H

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +14

      good to know thank you!

    • @mikkoliukko
      @mikkoliukko Год назад +10

      Audio was fine

    • @MrUltraworld
      @MrUltraworld Год назад +16

      Greetings from sunny Florida USA! The audio is fine, no issues there. I'm a longtime viewer and I wanted to point out the vast improvement in your editing skills. I've done a bit of it myself and I appreciate what goes into editing one of these videos. You do a great job of smoothing out offensive pops and bangs that happen in a shop that does a lot of grinding and cutting. You've also upped your video quality too, the 4k video is welcomed, lots of clever video editing as well.
      People are quick to complain about things, but I prefer to comment on things that stand out. staying positive. That's all.

  • @chrisjohnson4165
    @chrisjohnson4165 Год назад +325

    The Wizard of Aus kicks off our weekend!

  • @warbirdwf
    @warbirdwf Год назад +11

    Damn I'm getting older. Instead of enjoying and watching a master at his trade expertly repair that bucket, I thought to myself "my knees and my back would be killing me" half way through that project! LMAO! I guess there's a reason you don't see RUclips channels with guys in their 50's and 60's doing this kind of work! lol. Enjoy your 30's and 40's Curtis and take care of your body so you don't have to start your mornings 20 years from now with a bowl of aspirin to get moving! Your attention to detail and those welds you did were simply beautiful! The welds looked better than factory!

  • @daviddundas4140
    @daviddundas4140 Год назад +210

    Im picking the reason you got this job, is cos of the bloody good job you did 5yrs ago, nice work mate

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +55

      we get quite a few bucket repairs for this customer

    • @yeagerxp
      @yeagerxp Год назад +2

      @@tetedur377 LOL I see a thread similar to Homey's of last week with this bucket repair🤣🤣🤣🤣

    • @reneprovencher8395
      @reneprovencher8395 Год назад +7

      Great jobs get repeat business!!!!! Yes indeed.

    • @orangetruckman
      @orangetruckman Год назад +1

      @@tetedur377 -I’m sure they can dig it 😂

  • @pauljoseph8338
    @pauljoseph8338 Год назад +11

    8-10 hours?! For a one man shop?! My god, I would have thought at least 2 weeks. You and your wife are amazing.

  • @danhard8440
    @danhard8440 Год назад +363

    that got to make you feel really good that the one designed by the Manufacturer didn't even last one year BUT the one you made is STILL good after 5 years and still going strong !!!

    • @oldfatbastad6053
      @oldfatbastad6053 Год назад +26

      Kurtis knows his onions :)

    • @harmlesscreationsofthegree1248
      @harmlesscreationsofthegree1248 Год назад +39

      And his bananas

    • @tracktrend9722
      @tracktrend9722 Год назад +22

      nowadays everything is made To FAIL! but with Little bit of Brain You can redo it and have it last years :)

    • @russbentley7677
      @russbentley7677 Год назад +18

      Using tough stuff to toughen up a tough piece of equipment to keep it strong. Done right. A pleasure to watch how it's done. And we can enjoy watching how it's done because the camera operator is so adept and creative. Plus we get to see the woofer do his thing. And that puts a drop of fun on top. great job, again.

    • @brucemadden1626
      @brucemadden1626 Год назад +3

      @@harmlesscreationsofthegree1248 LMAO🤣

  • @AbhishekKr1902
    @AbhishekKr1902 Год назад +51

    The amount of work this guy does and the sheer amount of knowledge he has related to what he does is just INCREDIBLE.

  • @MartinMcMartin
    @MartinMcMartin Год назад +114

    Cutting edge engineering, doing some actual cutting edge engineering 👌👌

    • @AquaPeet
      @AquaPeet Год назад +6

      Yay you made the pun so I don't have to! :D

  • @rik999
    @rik999 Год назад +145

    I can't believe how clean and straight your free hand torch cuts are. I've free hand cut similar gauge metal over that distance with a much more ragged line. Just wow.

    • @Hyratel
      @Hyratel Год назад +7

      he did mention using Oxy/Propane instead of O/A because it makes 'a cleaner cut', and comparing that freehand cut to a motorized line cutter with an O/A flame they've shown in the past, I can well believe it. (is it Kurtis, or Curtis? I keep getting mixed signals)
      There's also the matter of steadying, bracing, and stancing yourself to allow moving the torch in a smooth, even line; you don't want to be having to think about your balance while trying to cut straight. and flame-off motion practice a few times to make sure you have the pacing correct

    • @stoveguy2133
      @stoveguy2133 Год назад +1

      How many kWh you use in 1 month?

    • @bulletproofpepper2
      @bulletproofpepper2 Год назад

      I’m not as good as Kurtis, but aim with your elbow not your wrist.

    • @johnjacobjingle8302
      @johnjacobjingle8302 Год назад +2

      As far as making a straight line is concerned that's practice, bracing, and dont get in your own way... outside of that.. make sure your pre heater holes are in line with your cut and know how to read the kerf.. pre-heating is also a must on most things..

    • @themeatpopsicle
      @themeatpopsicle Год назад +3

      I noticed this too, and I think a lot of it is very wise choices in how he braces his hands and torch. Really good work.

  • @JohnBare747
    @JohnBare747 Год назад +517

    All those needed repairs, even if the customer overlooked them, adds up to quite a Bucket List.

  • @hashgeek929
    @hashgeek929 Год назад +115

    The combination of Karen’s and Kurtis’ skills and the clear, concise explanations are what make this channel stand out from so many others.
    Mixing in behind-the-scenes clips of Homey, George, and outtakes is what gets CEE an immediate view every week instead of saving it for later. Even when it is “just” welding.

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +10

      Wow, thank you!

    • @GoblinDad-Nightmode
      @GoblinDad-Nightmode Год назад +2

      ​@@CuttingEdgeEngineering
      Completely agree with Hash Geek, you guys are on another level.
      Karen have you done any training or work in filming and editing? Proper professional job!

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +5

      Definitely not mate, just lots of practice 'on the job' cheers - Karen

    • @frankbodenschatz173
      @frankbodenschatz173 Год назад +1

      ​@CuttingEdgeEngineering Karen, it must be nice to grow your business in a way you might never have intended. Plus put a great deal of your own and the safety engineers feelings in as well! My 103 lb White Malaute would not do well in that environment as she suffers in our 72 F environment in our house spreading fur everywhere. Keep up the great vids, you three rock!

  • @AutoExpertJC
    @AutoExpertJC Год назад +88

    Nice use of the dog & wedge Kurtis. Respect. Such a practical way to form up the plate that's otherwise inaccessible to clamping.

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +15

      thanks mate glad you liked that!

    • @LiquidCacheFTW
      @LiquidCacheFTW Год назад +4

      I thought the same thing. It gave me a good smile.

    • @danieledwards1081
      @danieledwards1081 Год назад

      Takes me back to my younger days manufacturing chaser bins, lots of dog cleats getting the bowl profiles just right

    • @markfryer9880
      @markfryer9880 Год назад

      ​@@danieledwards1081 Sorry, but what is a chaser bin for?

    • @danieledwards1081
      @danieledwards1081 Год назад

      @@markfryer9880 collecting grain from the harvester in the field on the run so they don't have to stop harvesting.

  • @DonLuc23
    @DonLuc23 Год назад +11

    This super videographer should be making training videos. She is always in the right place, showing the operation as well as the aftermath. And, it's all clearly defined. Super job, even in winding conditions the wind noises is minimal.

  • @Stefan_Kawalec
    @Stefan_Kawalec Год назад +102

    That's how non-idyllic, non-influencer, non-instagram welding looks like. A lot of mundane, repetitive work that needs to serve someone's purpose. And you do it like a champ. Zero BS, just a perfect effect.
    It's a real pleasure to watch Karen's videos. Even Kurtis can't spoil them :)

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +30

      You summed us up pretty good mate haha. Cheers

    • @Stefan_Kawalec
      @Stefan_Kawalec Год назад +9

      @@CuttingEdgeEngineering I'm glad that you like it. All the best to both of you.

    • @vaderdudenator1
      @vaderdudenator1 Год назад +3

      Agreed. I further appreciate that he is able to give the customer what they want/need more than what he necessarily wants to do. Band-Aids are acceptable as long as the customer knows it’s a Band-Aid and they specifically say they want it. Finding them on that just wastes everybody’s time.

    • @Stefan_Kawalec
      @Stefan_Kawalec Год назад +3

      @@vaderdudenator1 To put it simple - Kurtis is an epitome of a professional. And Karen has a patience and a great talent to show it to us.

  • @beezo2560
    @beezo2560 Год назад +4

    9:36 That's the cleanest, straightest torch cut ever seen. Love the channel.

  • @giles691
    @giles691 Год назад +29

    can't believe i'm about to sit and watch someone do exactly what i do for a living 🙄 goes to show how good the production values are 👍

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +22

      Hahaa cheers mate, don't worry we do the same. IC weld is one of our favourite channels to watch

  • @descent815
    @descent815 Год назад +5

    I love that you’re not afraid to call your clients out for overlooking scheduled maintenance or regular maintenance. That should happen. That bucket is borderline of not even being usable because of how thin that skin is on the bottom.

  • @matthewsykes4814
    @matthewsykes4814 Год назад +30

    I love how your mod lasted longer than the OEM part did and now it basically needs a complete rebuild around your mod. Fantastic work as always, your customers are really lucky to have such a skilled and dedicated fabricator/genius.

  • @EinarLeonhardsen
    @EinarLeonhardsen Год назад +1

    if ever there was a Nobel Prize in Lathe, Metal and Welding. You've had it👍

  • @ThisIS_Insane
    @ThisIS_Insane Год назад +7

    The only thing I take away from these videos, is the fact that this man loves to play with metals. He cuts and sculpts, and makes it bend to his will. (Most of the time, can't win 'em all!) Your videos come out just awesome, and it's pure genius the stuff the two of you get accomplished! OATH!

  • @sanjaysami4315
    @sanjaysami4315 Год назад +29

    People underestimate how difficult it is to torch cut with this precision. Very early in your videos, the 2 things that impressed me the most was your skill with the torch and your skill with the forklift. I’ve been a welder for 35 years and haven’t seen torch control like yours an Isaac from IC Weld.

    • @Finnyc23
      @Finnyc23 Год назад +1

      yeah how good is the forklifting ive never driven one but he makes it look easy and im sure its not, he
      has a good eye

    • @markfryer9880
      @markfryer9880 Год назад +3

      ​@@Finnyc23 The rear wheel steering is really something to get used to. You have to exercise care around forklifts, they are a lifting and moving machine that is very much taken for granted, but they can easily kill or injure people.

    • @3PumpChumper
      @3PumpChumper Год назад +2

      IC Weld and CEE are both no-nonsense masters of the craft. I’ve been a welder for 25 years, and in fact built tractor attachments for 5 years, and I have learned little tricks from them that I try to remember and keep in my mental tool box of easy solutions.

  • @roberta4989
    @roberta4989 Год назад +19

    Who's the faithful one? Me!!! Hope you guys are doing great. Got my cold pint, ready to pay attention and enjoy my friends hard at work down under. Everything is so top quality, the craftsmanship and videography. Top Notch! Cheers!

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +3

      Right on time mate thanks for always being one of the first to watch! Cheers 👊

  • @TomokosEnterprize
    @TomokosEnterprize Год назад +4

    Oh my, I have rebuilt so many buckets over the last years of my former years and there was Arctec hard rod by the ton associated with these every year during our break-up when the roads thaw every spring. I never complained about operator abuse as it kept myself and two other talented fellas in a job that lasted for over 25 years eh. I can smell the air arc working away as we/I watch this. Sure do miss it. Retirement sucks eh, LOL. Thanks a bunch and take care my southern friends. Most of my low hydrogen filler rod was ArcTec 223. One had to be careful to burn off that soft start tip though. I didn't have that much knowledge about wire feeds. I found them to deteriorate a welders skills. Your knowledge about the various wires I could have really appreciated back in the day.

  • @mazevx2451
    @mazevx2451 Год назад +43

    Using the torch like a scalpel, impressive

  • @patrickcolahan7499
    @patrickcolahan7499 Год назад +7

    I hate when a customer doesn't give you the whole story so that you can prepare. Worse when they expect you to do a major when you planned for a minor repair in the same amount of time. Still, when you have the short story situation happen, it is another job that you can look forward to down the road. Great work as usual and thank you for sharing. All the best to you, the misses and Homeless.

  • @sadmule
    @sadmule Год назад +37

    Nice steady hand with that cutting torch. Good lines

  • @gabrieljohannson6777
    @gabrieljohannson6777 Год назад +3

    I’m no engineer or industrial welder, but you Sir are a credit to our country. You’re work & customer service is exemplary.

  • @kevinwallace3282
    @kevinwallace3282 Год назад +11

    I stay up late Thursday night just to watch you work brother. I love your attention to detail and accuracy. I'm an operator and hate to see equipment beat to crap. I spend 8+ hours a day in a machine and treat it like I own it. My only down time is preventive maintenance and I hope to be an owner/operator some day. Keep up the great work!

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +7

      With that attitude you'd be a successful owner operator! Well done mate if only more out there had the same attitude as yours 😎👊

    • @armageddontools
      @armageddontools Год назад

      @@CuttingEdgeEngineering But then you would not have that much job and $$$!

    • @brettymike
      @brettymike Год назад

      @@armageddontools Sssshhh! 🙂

    • @markfryer9880
      @markfryer9880 Год назад

      ​@@brettymike Don't worry, there are plenty of rough operators to keep Kurtis in more work than he has time to deal with.

    • @brettymike
      @brettymike Год назад

      @@markfryer9880 Please tell me something I don't already know :). I started my apprenticeship as diesel engineer on earth moving machinery, many moons ago. I OBSERVED the difference between machine operators then, and other various private operators (cars etc) today...some were fantastic, some were too rough, and could wreck a solid block of cast iron.

  • @Rogster559
    @Rogster559 Год назад +1

    Kurtis I once saw a bloke driving my cousins excavator using the bucket to smash large rocks instead of getting the ripper which was only 200 mtrs away the amount of damage to was incredible, the industry could use a lot more people like you teaching operators how to use the machinery safely ,efficiently and economically then there wouldn’t be as much pressure on repair crews to have the equipment back in operation in a short amount of time . Well done to Karen for another fantastic job filming and editing and I agree could have been some of George’s family, all the best from Tassie, whoops nearly forgot homeless love that little man

  • @mitchhifi9192
    @mitchhifi9192 Год назад +6

    Man these videos bring me so much joy, as a tradie myself I really appreciate your attention to detail.

  • @golfbravowhiskey8669
    @golfbravowhiskey8669 Год назад +1

    I can’t tell you how much I appreciate the outtakes at the end.
    That’s real life, nothing goes as smooth as the video !!

  • @Deutschehordenelite
    @Deutschehordenelite Год назад +35

    That is some fine precision with the torch, damn

  • @theardentone
    @theardentone Месяц назад

    Another weekend where I have no time in my day and yet I've ended up watching a digger bucket get fully repaired. Such good videos and very informative.

  • @2barrell
    @2barrell Год назад +31

    I always enjoy watching your repairs. Your skillset is amazing

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +7

      Hey mate glad you enjoy watching

    • @2barrell
      @2barrell Год назад +8

      @Cutting Edge Engineering Australia I look foreward to Karens videography and your problem solving. From Ozark, Arkansas - Bananaville

  • @prickelpitt
    @prickelpitt Год назад +1

    Du hast eine tolle Berufsehre. Das ist selten geworden. Finde ich toll.

  • @rikard4511
    @rikard4511 Год назад

    After all my years on youtube, this is the first channel to show me an air gouger!

  • @rohanhooker5195
    @rohanhooker5195 Год назад +53

    I just love the tarp shelter. What a awesome use of space

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +15

      it's been fantastic especially during the summer months

    • @Michael-rg7mx
      @Michael-rg7mx Год назад +5

      I'm glad that I was wrong. I didn't think it would last a year. Sorry for my pessimism.

    • @oldfatbastad6053
      @oldfatbastad6053 Год назад +2

      @@CuttingEdgeEngineering and when its pissing down o'rain

    • @gullreefclub
      @gullreefclub Год назад +3

      @@Michael-rg7mx ​ I built a similar covered work area about 10 years ago. The first tarp I bought was from Harbor Freight and it didn’t last 6 months. The next tarp I purchased from obviously a different company cost a little over 2&1/2 times as much but it lasted 5 full years. Just kind of proves the old adage about you get what you pay for. I replaced the tarp with a used one from one of those metal pole and canvas pole barns that I bought for scrap. The canvas was 3 years old and the pole structure was over 15 years old and was pretty much scrap (some drunk stole a skid steer and went on a rampage. The cops found him passed out in the machine buried under a couple tons of the building.

    • @Michael-rg7mx
      @Michael-rg7mx Год назад

      @gullreefclub
      I've lived in places that are way too windy. Last week, it blew hard enough to flip trailers. The trees nearby were stripped bare and broken. When I lived near Seattle, the wind sunk 2 concrete floating bridges. The I90 freeway and the Hood canal bridge.

  • @wingnut2893
    @wingnut2893 Год назад +1

    As, originally, only being an electrician, I've traveled the world for the biggest part. I've been working on projects in some 34 countries on multiple occasions.
    I've been working together with numerous welders, machinists and mechanical engineers. All I can say about what I've seen you doing. Is that I'm sure you're an absolute wizard.

  • @TylerKelsey94
    @TylerKelsey94 Год назад +12

    It's 2:00 am here in missouri but love to watch your content bud great work!

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +1

      hey mate that's crazy!! Thanks for taking time to watch at such an early hour 😎👊

    • @LadyAnuB
      @LadyAnuB Год назад +1

      @@CuttingEdgeEngineering Midnight in CA when you come on now. (It used to be 11 pm but DST time change.)
      I do walk the dog at this time or later 😅

    • @oldfatbastad6053
      @oldfatbastad6053 Год назад +1

      im in GB and i get these 8am friday mornings, tea n toast and watch video :)

  • @mazchen
    @mazchen Год назад +2

    Wow! Your freehand cuts with the oxy torch are amazing. Looks like lasercut on a table!

  • @Hotwire454
    @Hotwire454 Год назад +14

    Thank you guys for your time and talent! I'm home recovering from a botched spine surgery and having a new video to binge on has put me in a happy place!

    • @markfryer9880
      @markfryer9880 Год назад +1

      Try and stay as comfortable as possible brother! I know that it isn't going to be easy to find that spot but hopefully the meds will help.
      I started the year off well with Covid over Christmas/New Year and it just gets better. I threw my back out in February on the last day of work before I was going to have a week off for my 58th birthday. Laid up for three weeks, a week of half days then two weeks of light duties and then 10 days off for Easter. Back to work for the 4 day week last week and I was ready for a rest this weekend 😅. Back to work in a couple of hours. Oh well, at least I have a job.
      Keep your chin up mate!
      Mark from Melbourne Australia

  • @jimbob4456
    @jimbob4456 Год назад +1

    From a non machinist’s and non welder’s perspective, it’s Always interesting to see the little tricks he uses.

  • @Alltakenbla
    @Alltakenbla Год назад +17

    A shout out to all operators who like CEE!

  • @imurhuckleberry7777
    @imurhuckleberry7777 Год назад +2

    I love the clock, sometimes we forget the time it takes to do the work.

  • @gazzafloss
    @gazzafloss Год назад +5

    Hey Kurtis, you'd better keep wearing that skull cap, we've noticed you're growing so tall you're growing through your haircut. Look after yourself mate, watch out for metal spatter. A nice neat job with what you were given to work with. "A silk purse from a sow's ear".

  • @paulcooper2897
    @paulcooper2897 Год назад

    Audio was fine for me!
    Welcome to any and all job sites .. where EVERYTHING that isn't a hammer is used as a hammer!
    Thanks for sharing 🇨🇦

  • @andrewbrewster1194
    @andrewbrewster1194 Год назад +4

    Gouging is fun have gouged for full shifts earbuds with some tunes 👌 I do alot of repair work my self love watching these vids

  • @Kakihara1979
    @Kakihara1979 Год назад +1

    Real nice welding there and as always just awesome videos. The reason we use those buckets to move big amounts of materials is because we use them when we make a ditch or hillside, and at the same time we load dumpers or trucks. Instead of making dubbel the effort to make the ditch or hillside then going back to load the truck we save a lot of diesel when we do two things at the same time. I live and work in north Sweden, here we have very rocky ground and almost with no exception we use rotary tilts on every machine under 30 tons. Here the manufacturers has had to make them tougher to handle the load we want to use. Also the rotary tilt is invented here in North Sweden. Big thanks if u have the patience to read my little post 👍

  • @tinman7551
    @tinman7551 Год назад +8

    It’s the greatest channel on RUclips evar!! The Karl and homeless show 😅❤🥰 Karen the video editing lately with the 70’s split screen is sooo amazing 🤩 ❤ genuinely love you guys.

  • @darrellbedford4857
    @darrellbedford4857 Год назад +1

    Two comments, both based on other comments. As mentioned by others, the majority of your repairs must be from the mining industry. The next is I believe your motto is once out of the shop I don't want to see it back in to do the job over. I do it to last. The piece may be back in but for a completely different repair. Keep up the fantastic work and give Karen an award for her cinematography for both filming and editing. Thanks again guys for the videos.

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад

      Pretty much sums it up mate! and thanks so much, I'll pass on your comments on to Karen and let her know we'll keep her on 😅

  • @janmichaelcatap5994
    @janmichaelcatap5994 Год назад +3

    Love the way how you work, methodical and no cutting of corners. Quality workmanship. I'm from the Philippines and I rarely see this kind of workmanship.
    More power to you CEE, will be tuning in for more of your vids.

  • @thalstantrailwalker2393
    @thalstantrailwalker2393 Год назад +2

    sometime people want to know "why does a simple welder cost so much" My answer, show them your channel. Your craftsmanship is exceptional and explains why welding (done right) is not "simple" but an extremely challenging task requiring a lot of knowledge, skill, and experience.

  • @sjorsdewit9394
    @sjorsdewit9394 Год назад +11

    Thank you for taking the effort to make such great videos! I’ve learned so many tips and tricks from this channel for example at 17:00. I’m not a professional and do some welding and machining as my hobby/spare time job. last winter I was repairing the deck of a small old dredger and this tip would’ve saved me so much cut in halve c clamps and headaches. Thanks and thanks again!

  • @colinmoriarty
    @colinmoriarty Год назад

    Dang those side cuts with the torch looked good enough to clean up with the grinder, really shows the level of craftsmanship here

  • @peterantonic6923
    @peterantonic6923 Год назад +4

    Those welds you put on the bucket were absolutely awesome, a work of art. I was watching some Russian company from St Petersburg that manufactures huge buckets for the mining industry from scratch. Their way of doing things is different, your attention to detail was outstanding. Thank you both very much for another great Friday video. 😁👍🇦🇺

  • @markmunro8753
    @markmunro8753 Год назад +1

    Thank you team . I never saw chocky bars before. Customers should send you a picture of the broken machine part.😊Homless is a super star.

  • @wendyowen8403
    @wendyowen8403 Год назад +3

    It is so gratifying to see a true professional doing his job. Attention to detail and quality of the finish. Great to see especially in a world where quality is becoming a lost art. Very well done Curtis.

  • @stevejohnstonbaugh9171
    @stevejohnstonbaugh9171 Год назад +2

    That bucket has moved a lot of very abrasive earth in the past 5 years. Can't say I've ever seen one beat that bad.

  • @GenericUserName10
    @GenericUserName10 Год назад +6

    Absolutely insane how sharp the skin got. I definitely wouldn't trust myself around that seeing how often I cut myself on duller things. Thanks for the quality video. 😊

  • @Gus1966-c9o
    @Gus1966-c9o Год назад +1

    I came here to see the yard crane , the bucket repairs were a bonus ! Another top notch job .

  • @wheelitzr2
    @wheelitzr2 Год назад +3

    I woke up 2 hours early just to watch this as soon as I could. By FAR my favorite channel on RUclips! Kurtis is a bad ass and you are a fantastic camera/editor of the videos! Thank you guys for the videos!!

  • @here2there880
    @here2there880 Год назад

    This is my favorite type of video. Of all the repairs you do these fabrication/repairs are the most interesting. They are simple fixes by design but require skill to do correctly. Those welds were a thing. of beauty.

  • @oldfatbastad6053
    @oldfatbastad6053 Год назад +6

    Matty for the small intricate stuff and CEE for the big stuff 😃

  • @jasonrowe268
    @jasonrowe268 Год назад

    Like the addition of the clock so we can see how long tasks actually took. That was a good suggestion made last week by someone. Puts it into perspective.

  • @thomashaley7657
    @thomashaley7657 Год назад +30

    Most machinists I know either aren't competent enough, or they're just to damn lazy to take on a job like this! Amazing work Brother! I've been doing weld, fab, and repair for 40 years. Some of you younger guys really amaze me. Really nice fit up by the way. Thomas, Mississippi, USA!!

  • @coffeytime1979
    @coffeytime1979 Год назад +1

    Good day from Arizona, great work,and always nice to see that there are still some of us around that go the extra mile for our customers, even at times at our own expense,but that kind of work ethic and prude I've found will always keep you busy and have repeat customers!good job!

  • @kenkline6319
    @kenkline6319 Год назад +3

    You truly are an artiste mate! Having such a steady hand when you were cutting with that LP torch was artistry in motion! Top job!

  • @reginald2004
    @reginald2004 Год назад

    At least you're working with an industry where you can repair and rebuild. No end to the work. Great video!

  • @dakotareid1566
    @dakotareid1566 Год назад +4

    It’s 4am here in Canada. Am I watching this right now? Yes yes I am

  • @garyevans8116
    @garyevans8116 24 дня назад

    I’m surprised by how the old bits were so worn compared to the new ones. Good job Kurtis. Karen and homey.

  • @virinom
    @virinom Год назад +11

    You must be proud when you see your 5 years old job still holding up quite well. Good job as always

  • @kaydog2008
    @kaydog2008 Год назад +1

    Would of like to have been there to see the customers reaction when you returned the bucket.👈😲WOOOW! Priceless 👈👀👀

  • @vhostovich
    @vhostovich Год назад +6

    What a team you three are !!! That is a lot of work done in one day.

  • @philleasthouse3791
    @philleasthouse3791 Год назад +1

    In what is on the surface a rough n ready job I love the care and attention to detail Kurtis put into each job.

  • @woobykal68
    @woobykal68 Год назад +12

    When I see the bloopers I feel better because ever a Master steel whisperer like Kurtus makes mistakes.

  • @T.v.d.V
    @T.v.d.V Год назад

    I am learning so much from two Aussies and a dog.
    Thank You three.

  • @Murgoh
    @Murgoh Год назад +4

    It's interesting to see how different the buckets used in different parts of the world are. Here in Finland the ground is mostly clay or silt packed extremely hard by the ice ages and frozen for a third of a year so the buckets we use need to have a lot of penetration ability into hard ground, they can't have a blunt edge.
    We seldom use separate mouth pieces and bolt-on cutting edges here, there's mostly just a hard plate cutting edge welded directly to the bucket and when the edge needs replacing we just cut it off and weld on a new one. Also the standard excavator buckets used here are different shape from the ones used in most other countries, ours are narrower and deeper and have longer "lip" to better penetrate into hard ground. Most of the excavators are imported without a bucket or have their bucket replaced by the importer as the factory ones are wider and more shallow and have bolt on cutting edges and side cutters and they are not practical here in most jobs.
    Wheel loader buckets, the same thing, mostly no bolt on edges and on medium and larger machines the cutting edge is usually V-shaped, like a spear point, to better penetrate into hard gravel. On large machines teeth may be used, especially when handling rock.

  • @richard-em6zi
    @richard-em6zi Год назад

    Luckily for you you had the materials on hand to make that bucket skin patch. If you don't have the materials to make it work, it makes it hard to complete the work in a timely and efficient manner. The rest of the repairs were top notch. Aussie's are the most universally professional at their professions. As well as some of the most genuinely good people. And I can respect that. Keep up the good work

  • @ioannisd00
    @ioannisd00 Год назад +3

    The Isaac welding cap makes a return

  • @riverflyswatter
    @riverflyswatter Год назад +1

    Always perfect editing. Keeps me from fast forwarding thru the mundane.
    Not to forget the superb fabrication and welding.
    Thanks again!

  • @ddalnz
    @ddalnz Год назад +4

    You, Kurtis, are as much an artist, as you are an engineer and a machinist. I can watch your channel all day long. And I trust you realize what a treasure you have in Karen I watch a lot of RUclips and she is an enormously talented videographer. Don’t let Industrial Light and Magic steal her from you and Homey

  • @steveb1739
    @steveb1739 Год назад

    Super job Kurtis! The dual core / gas wire is the business. Let's hope the Customer appreciates your hard work, expertise and flawless execution of the work!

  • @KeithStewart-zn8mg
    @KeithStewart-zn8mg Год назад +4

    Great work team of three. Shout yourselves what ever you fancy that you can get for $20 🙂

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +8

      Hey Keith thanks very much mate for the generous contribution! Karen's going to get a fancy date night at Maccas 😂👍

    • @AndyMcBlane
      @AndyMcBlane Год назад +2

      Don't forget RUclips take their ~30% lol

    • @tellyfaulkner3466
      @tellyfaulkner3466 Год назад +2

      @@CuttingEdgeEngineering Settle down there Kurtis. Karen might get too used to the good life 🤣🤣

    • @KeithStewart-zn8mg
      @KeithStewart-zn8mg Год назад +2

      @@AndyMcBlane It will be a three bags of fries then!!

  • @GIGABACHI
    @GIGABACHI Год назад +1

    Love eating dinner while watching Curtis going at it. 👌🙂👍
    Thanks for the entertainment.

  • @MtnHiker
    @MtnHiker Год назад +7

    My favorite channel. The quality of the video's and editing continues to improve and with Kurtis explaining what and why it's a great learning experience. I see Homey still hasn't beaten that lobster... 😁

  • @nbpanthers
    @nbpanthers Год назад

    working 12 hour shifts in a metal fab shop and then coming home and watching CEE

  • @andreim841
    @andreim841 Год назад +98

    Unfortunately is not operator's fault most of the times...upper management wants things done and wants it done yesterday regardless if you have what it takes or not and like the old saying goes "if all you got is a hammer then everything starts to look like a nail" .

    • @ThisIS_Insane
      @ThisIS_Insane Год назад +5

      Or, "If a pickpocket meets a Saint, all he sees are his pockets" ~ Hari Dass Baba

    • @ohasis8331
      @ohasis8331 Год назад +22

      I love the supervisor who is adamant they want A and you inform them it needs service first otherwise it's going to bugger up and will need A as well as B. Do the job as ordered.
      Then they get crook at you and demand why you didn't tell them, all harsh words and floral language. It's fun to watch their faces when you quietly say "I did". Not a word in response.

    • @EdwinWiles
      @EdwinWiles Год назад +1

      ​@@ohasis8331Get it in writing if you can, some management will deny you ever said anything.

    • @dystopianlucidity4448
      @dystopianlucidity4448 Год назад +12

      @@ohasis8331 I always handed in a paper with my written observations, and had them sign it. Then when they got cross, which they always did, I handed them the paper they signed.

    • @jhawker2895
      @jhawker2895 Год назад +7

      Sadly if the company doesn't own the equipment they usually don't really give a $hit....

  • @catgynt9148
    @catgynt9148 Год назад +2

    Loved your ambidextrous use of all the tools and welding positions necessary. Really impressed with your craftsmanship, artistry and skills. If you ever tire of this work consider teaching; you have an excellent presentation style. Wishing you, your dear lady and furry safety inspector another blessed week filled with gentle seasonally appropriate weather and restful evenings. Peace brother

  • @Reaperofsouls99
    @Reaperofsouls99 Год назад +4

    I find wear packages so interesting, studied material engineering for a bit at uni and love seeing it in practice! Such high quality work and taking the time to do it right. So nice to see and fun to watch. :) Hi from Newcastle NSW

  • @walrusinanus
    @walrusinanus Год назад +2

    Welding is such an art.

  • @wildgophers91
    @wildgophers91 Год назад +4

    It’s so crazy to me how much metal wears down in these machines. Never woulda believed it if you all didn’t show it.

    • @Xamy-
      @Xamy- Год назад

      Shouldn’t take that mate. That’s just like antivaxxer thinking

    • @wildgophers91
      @wildgophers91 Год назад +2

      @@Xamy- It's just so ... wild! The scale that industrial machinery operates at it just so much different from my everyday life, you know? I mean, I drive my car or whatever and understand that things wear out, but seeing those bolts and the metal around them is a whole different perspective.

    • @markfryer9880
      @markfryer9880 Год назад

      ​@@wildgophers91 Ever seen bluestone steps worn down by the footsteps of hundreds of students over more than a century of use? There are bluestone steps and threshold stones worn down by shoe leather at the school I work at in Melbourne, Australia

  • @ironkling1994
    @ironkling1994 Год назад +1

    Swedish engineering in the beginning, no hitachi BS. Rototilt for the win.

  • @robbfisher2876
    @robbfisher2876 Год назад +8

    The OEM should take all the OZ plates they welded on that bucket and use them as a wear package

  • @BruceBoschek
    @BruceBoschek Год назад

    We watched this after breakfast and were impressed again at Kurtis' surgical scalpel work with the torch. What an impressive job that was, regardless of the limitations due to the customer not adequately investigating and reporting the damage. We wish you a pleasant and peaceful weekend.

  • @hanssgarage1886
    @hanssgarage1886 Год назад +5

    Well done once again! And it’s always a pleasure to see the old crane in operation.😁🫶 Greetings from Finland to you and fellow subs.🤗

  • @BlueSpark-vy3fd
    @BlueSpark-vy3fd Год назад +2

    Always amazed at how versatile and resourceful you are Kurtis, and Karen's camera work shows the process so clearly. Another good'un guys! 👍👍

  • @GrumpyHarleyRider
    @GrumpyHarleyRider Год назад +5

    Love waiting for the notification every Friday for the CEE video! Karen does an awesome job with the video editing. Makes mine look absolutely pathetic! Keep up the good work guys.
    Now we wait for a notification from BigStack!

  • @phuturephunk
    @phuturephunk Год назад +1

    Art, dude. Art. It is so therapeutic to watch you work. Well done.

  • @StaffordMagnus
    @StaffordMagnus Год назад +6

    Is this bucket too light duty to use the sacrificial bolt-on edge wear plates that I see on mining buckets?

    • @CuttingEdgeEngineering
      @CuttingEdgeEngineering  Год назад +7

      yes spot on mate, those wear plates would definitely be too heavy & bulky and for the cost of them they're not worthwhile for a "small" bucket like this one

  • @davidyates748
    @davidyates748 Год назад

    Lovely work Kurtis, making the best of a crappy situation. Thanks also to Karen for the excellent videography!