Good day. I think your content is excellent, keep it up. I have a question. Is it necessary to connect all the GNDs (arduino and sensor), or can it be independent?
For the temperature sensor and the current to voltage converter module, if a separate power supply is used by the sensor, their GND could be separate from that of the Arduino
Legal seu vídeo. Me diz, qual versão do Outseal eu consigo descarregar o programa no arduino nano. Estou tendo problemas na transferência do programa em todas as versões do Outseal para o Arduino nano, e ainda não consegui descobrir o problema. Se puder me ajudar, agradeço.
@@OnosTech anyways bro, now i worked with DHT11 sensor and i wanna try to read it with outseal studio. the input is digital so its different with this tutorial. can you help me?
many many thanks for your best...❤️❤️❤️
You are most welcome
Ótima aplicação para a automação industrial com baixo custo, parabéns por compartilhar seu conhecimento
Thanks a lot
Good day. I think your content is excellent, keep it up. I have a question. Is it necessary to connect all the GNDs (arduino and sensor), or can it be independent?
For the temperature sensor and the current to voltage converter module, if a separate power supply is used by the sensor, their GND could be separate from that of the Arduino
@@OnosTech thanks you for answer
As always great tutorial
Thanks
Thanks, a great useful lesson. I like this videos series
You're welcome! 😊😊😊
uow!!!!! it´s most amazing your video, thank so much. congratulations!!! [ ]´s
Thank you too!
Super work 👍👍👍
Thanks
you are more thane great
Thanks
Great!!!
Thanka
I discovered outseal thanks to you
Can outseal read I2C sensors??
👍👍👍 Outseal PLC can read I2C sensors. The next few tutorials are around I2C
@@OnosTech woow! Thanks
You are welcome
Make sure to subscribe and enable notification so you don't miss it
Always done ✅
Hello
Have you had success with the Online mode at Outseal? On some Arduino Nano it doesn't work properly. Do you know how to solve this problem?
Hi,
Yes I have!
Have you uploaded the Outseal nano bootloader?
Here is the link on how to: ruclips.net/video/caiiO4d6lR4/видео.html
How to Program PLC for the Bottle Filler Machine
😊
great sir..👍
Thanks and welcome
I hobe you make same topics video
@@mdmostafashahid948 insya allah sir 😊
sir, can you make a tutorial on how to access PZEM 004t to the Arduino Outseal PLC ?
I can, but I don't have this module.
Legal seu vídeo. Me diz, qual versão do Outseal eu consigo descarregar o programa no arduino nano. Estou tendo problemas na transferência do programa em todas as versões do Outseal para o Arduino nano, e ainda não consegui descobrir o problema. Se puder me ajudar, agradeço.
Thanks. This video should help you. ruclips.net/video/caiiO4d6lR4/видео.html
@@OnosTech Thank you very much. I'll see later.
Brother is have one problem
I am using two analog port at time and different analog input
A2 pin measure 0 to 5v
But A1 pin only measure 0 to 2v
Please explain the problem in details
Is there anyway Outseal can have more than 2 analogue inputs, can it have say 8 or 10??
You can use Extended Module ruclips.net/video/GEeiTLoXdKY/видео.html
or ruclips.net/video/w0vQqteCe1Q/видео.html
s.click.aliexpress.com/e/_DdIy9P1
bro i wanna know the reason why you devided max output voltage with 5 and than you multiply with 1023, how come?
www.electronicwings.com/arduino/adc-in-arduino
@@OnosTechNice bro, very helpfull, Thank you
@@OnosTech anyways bro, now i worked with DHT11 sensor and i wanna try to read it with outseal studio. the input is digital so its different with this tutorial. can you help me?
Plz give me 4 Tx 4/20 mA plc
Use extended module to get two extra analog input ruclips.net/video/GEeiTLoXdKY/видео.html