Lifting plan shall be prepared by a competent person, Lifting foreman or engineer not the job of safety officer. However I will share a sample in the next video "Part-3"
Sir please give us some videos on different topics tool box talks to be used in construction site with talk content which will be very useful. Thanks sir
Part 1 and 2 good, I have one year experience in industrial safety. Now am going to enter in construction safety.. Can u please tell, important hazards and precautions to monitor in site.
Hazards already explained in Part 1 & 2. Precautions please watch my videos on 1. Work at Height 2. Electrical safety 3. Crane safety 4. Hot work 5. Work permit
Sir, I have to ask you some details. 1.What's the procedure for start a safety consultants like third party inspection (fire extinguisher, belt, hoist and lift etc..) 2.Is it any certificates needed for that? what it is? 3.if we get certificate to start. How to recruit senior official for preparing managing all the procedures to work. Sorry sir, if it is wrong questions means.I'm completed M.tech (ISE) and willing to move into buisness world. I have searched lot but I didn't get any clear information. And thank you sir for this service. Safety is multi profession, Its added youtuber now!🙏
1. Lifting tackles and appliances including Safety harness shall be tested by a Competent person approved by State government. Since you have completed M. Tech, please refer Factories Act 1948 & TNFRules 1950 for further details My suggestion... start after your 40+ and join in a consultancy firm for few years before starting on your own
Sir. Kindly explain about the 1.how to search job for the post of safety officer,safety manager etc. 2.And also how to apply job in middle East and European countries?
Request you to see my videos in this regard Top 5 Tips to apply for Safety Jobs (Tamil) ruclips.net/video/G1LcSzjQyHI/видео.html Top 5 Interview Tips for Safety Jobs (Tamil) ruclips.net/video/BjG7E9oBQng/видео.html
Sir very good experience I got more information about construction safety . When will you upload video per week upload 2videos. Next video about Factories act very useful content 😉👌
You mean construction of Power plant chimney. usually you will have concrete chimney made through slip form technique. 20 years ago we did, don't remember much now
My question is regarding job search as a fresher. If every employer is asking for experience while recruiting and if I'm a fresher, how could I get either a job or an experience sir??.. should I fake my experience?(which is ethically wrong). I humbly request you to reply for my question sir. Or if possible please do a seperate video regarding this. Thanks.
Please watch my Videos to get an idea, I have replied this question many times. For fresher not only safety field, all field will be difficult to get job initially. I was jobless for 2 years after my BE and finally got. Donot lose hope, keep trying and accept even small jobs Top 5 Tips to apply for Safety Jobs (Tamil) ruclips.net/video/G1LcSzjQyHI/видео.html Top 5 Interview Tips for Safety Jobs (Tamil) ruclips.net/video/BjG7E9oBQng/видео.html
Hello sir, I studied engineering and PG diploma in safety management. I have worked as a safety officer one year. What I do now. Can I continue as a safety officer? I want to study NEBOSH?if I have electrical engineer job can I change my path??
I am work as firefighing technician in ksa. I willing to study nebosh. And I want to be improve my self. So plz you guideline. Where is study? And how to prepare.?
Dear Friend, I don't remember, I committed like this .. never mind. Oil & Gas safety books are restricted. You need to refer NEBOSH ITC in Oil & Gas operational safety materials. I have few materials which are copy righted hence unable to share. You can also visit ADNOC website where lot of HSE procedures related with Oil & gas safety details available
Sir
Part 1 and Part 2 done
I was working as a EHS from 2009 to 2015
Still learning from u sir
Thank u 🙏 sir
All the best
Lift plan lifting safety requirements and recommendations much needed topic thank you
Lifting plan shall be prepared by a competent person, Lifting foreman or engineer not the job of safety officer. However I will share a sample in the next video "Part-3"
Thanks for sharing your experience sir. Please keep on doing.
Thank you, I will
Thank you for your useful Information
You are most welcome
Sir please give us some videos on different topics tool box talks to be used in construction site with talk content which will be very useful. Thanks sir
Many construction TBT are available in the net.
Useful Information Sir
Thanks and welcome
Excellent video very useful
Glad you liked it
Sir super I am studying nibosh it is very useful sir
All the best
Part 1 and 2 good, I have one year experience in industrial safety. Now am going to enter in construction safety.. Can u please tell, important hazards and precautions to monitor in site.
Hazards already explained in Part 1 & 2. Precautions please watch my videos on
1. Work at Height
2. Electrical safety
3. Crane safety
4. Hot work
5. Work permit
Sir, I have to ask you some details.
1.What's the procedure for start a safety consultants like third party inspection (fire extinguisher, belt, hoist and lift etc..)
2.Is it any certificates needed for that? what it is?
3.if we get certificate to start. How to recruit senior official for preparing managing all the procedures to work.
Sorry sir, if it is wrong questions means.I'm completed M.tech (ISE) and willing to move into buisness world. I have searched lot but I didn't get any clear information. And thank you sir for this service. Safety is multi profession, Its added youtuber now!🙏
1. Lifting tackles and appliances including Safety harness shall be tested by a Competent person approved by State government. Since you have completed M. Tech, please refer Factories Act 1948 & TNFRules 1950 for further details
My suggestion... start after your 40+ and join in a consultancy firm for few years before starting on your own
Sir. Kindly explain about the 1.how to search job for the post of safety officer,safety manager etc. 2.And also how to apply job in middle East and European countries?
Request you to see my videos in this regard
Top 5 Tips to apply for Safety Jobs (Tamil)
ruclips.net/video/G1LcSzjQyHI/видео.html
Top 5 Interview Tips for Safety Jobs (Tamil)
ruclips.net/video/BjG7E9oBQng/видео.html
Superb 💯
Thanks 🤗
Thanks for sharing video improve
Most welcome
Dear sir சூப்பர்
Thanks
Super sir❤
Thanks
Sir very good experience I got more information about construction safety . When will you upload video per week upload 2videos. Next video about Factories act very useful content 😉👌
Thanks. It would be difficult to make 2 videos per week, present plan is one per week.. Factories act will take another 2 months, I have in mind
Sir one another request for freshers
If you could narrate all safety legal laws of India regards construction it would be much helpful
Please watch my video on where I have briefed
Resources for a Safety officer (Tamil)
ruclips.net/video/CyEB-7LsQaI/видео.html
Sir can explain about life line and it's capat
Life line shall be of 8 mm wire rope or minimum one inch PP rope and meant for only one person
Method statement yapdi prepare pandradhu sir
Adha pathi full video podunga sir
Already replied
Thermal power plant chimney safety paththi sollunga...
You mean construction of Power plant chimney. usually you will have concrete chimney made through slip form technique. 20 years ago we did, don't remember much now
My question is regarding job search as a fresher. If every employer is asking for experience while recruiting and if I'm a fresher, how could I get either a job or an experience sir??.. should I fake my experience?(which is ethically wrong). I humbly request you to reply for my question sir. Or if possible please do a seperate video regarding this. Thanks.
Please watch my Videos to get an idea, I have replied this question many times. For fresher not only safety field, all field will be difficult to get job initially. I was jobless for 2 years after my BE and finally got. Donot lose hope, keep trying and accept even small jobs
Top 5 Tips to apply for Safety Jobs (Tamil)
ruclips.net/video/G1LcSzjQyHI/видео.html
Top 5 Interview Tips for Safety Jobs (Tamil)
ruclips.net/video/BjG7E9oBQng/видео.html
Hello sir, I studied engineering and PG diploma in safety management. I have worked as a safety officer one year. What I do now. Can I continue as a safety officer? I want to study NEBOSH?if I have electrical engineer job can I change my path??
First you need to decide on your career either Electrical or safety... Then decide how to progress... Choice is yours
Dear sir, for construction site any third party certifications providers are available like ISO 14001....?
Please elaborate, I donot understand . You mean system certification like ISO 9001, ISO 14001 etc
Yes sir, during construction any third parties are available to do the safety audit and issue certifications..
Yes.. DNv, TUV, Lyods are some of the organizations
Is there need of msds for paint sir?
MSDS is available for paints also
Nice by Robert. tirupur
Thanks for listening
Sir i want safety manager, assistance manager and Safety Head roles and responsibilities... please to share sir 🙏
I have posted 3 videos on Safety officer responsibilities.. this applies to all
Sir rain time eppdi sir walk ways clear pantrathu
I have not cleaned so far my friend
Sir loto pathi deep ah sollunga sir
Already posted a video, Pl. check
Sir after plustwo nebosh igc Pani job ku pokalama after that nebosh dipoma coress la panalama
Sure .. But with degree or diploma would be advantageous to get good jobs
Sir safety audit and audits courses details sollunga sir
Will consider in future
I am work as firefighing technician in ksa. I willing to study nebosh. And I want to be improve my self. So plz you guideline. Where is study? And how to prepare.?
Please watch my video in this regard to get an idea
NEBOSH IGC explained in Tamil
ruclips.net/video/MkFM56bHRkk/видео.html
Sir oil and gas industry safety book solranu soninga...but u forgot.....plz tell the good book to study sir
Dear Friend, I don't remember, I committed like this .. never mind. Oil & Gas safety books are restricted. You need to refer NEBOSH ITC in Oil & Gas operational safety materials. I have few materials which are copy righted hence unable to share. You can also visit ADNOC website where lot of HSE procedures related with Oil & gas safety details available
@@safetytogether7434 k sir thank you
Good experience me
Thanks
sir, after 2-3 months, what about the job openings? will there any chance for freshers
Job openings already started, after few months it will pick up. Again depends on normalcy of International flights and visas
Sir iam BE mechanical engineering complete panniruken na NIBOSH safty cource padikalama
Sure you can do. Please watch my video on the below link to get an idea
NEBOSH IGC explained in Tamil
ruclips.net/video/MkFM56bHRkk/видео.html
Sir how to get Aramco approved in hse
Try to join with their subcontractor, then it would be easy
sir, please share emirates of abu dhabi municipalities & agricultural book download link.
Try scribd
Sir na b.Sc fire & industrial safety padikuren na govt safety officer ra work panna additionalla enna padikanum? Sollunga sir
Please watch government advertisements where the the Safety officer qualification and experience is clearly spelt out
which university? your course is approved by DISH?
Sir book link plz
Dont Have
Sir safety book link
Already given in the slide
@@safetytogether7434 OK sir
What is physical qualifications for safety officer 👮?
Sorry I donot understand "Physical" qualification. Do you mean educational qualification or "Physical fitness"
Physical fitness
For safety officer not required. When you work in Oil & gas sector, you need to pass medical examination where required
பின்புற இசையை தவிர்கவும்
Agreed, will try to reduce the sound level