I've just completed this repair. I had to replace the volume flex as I managed to nick it when cleaning old adhesive from the frame before fitting new back glass :(. I removed the logicboard, wasn't difficult to reconnect the two cables and gave me room to work. Thanks for the video, really helped.
Love my suction cup pliers. Sometimes it just pops right off. Changed battery in iPad Pro A1584 and now touch doesn’t work. Screen is cracked but out was working before. Put a pick in batt connector when installing screen so just not sure wtf. Also replaced the charging port using low melt 183c solder. Easier than I thought and it charges. Any ideas? Can’t mail it to you. Did they start putting in the parts from the back on the 14? Nice video!
Now days I put a wedge next to the battery connector, you don’t want to accidentally bend one of the pins and have to repair that connector. As for the touch not working. Have you tried another screen. The flex on that model is so short. It’s possible you tugged on it a little bit too hard. I’d either try another screen. Or id try reseating the 2 flex’s on the actual screen next to the daughter board
@@repaironwheels I’ve got pretty much everything. Just watched a vid and have found that I have a burned filter(cap? Looks like a resistor)don’t know the value. I must have made a mistake somewhere and caused this. At 0201 it’s going to be a challenge. No coffee that day. What’s the likelihood of finding one on an old junk iPhone 6P. Update: ordered a set of magnetic ferrite beads of various ohms. Fancy name for filters I guess. 0402 is the smallest. Question is what’s the ohmage? They go from 0r to 2k.
@repaironwheels yeah, your correct. I did a housing rebuild in the UK and this part wasn't even present. The board connector wasn't in place either, had a black plastic square in its place.
I've just completed this repair. I had to replace the volume flex as I managed to nick it when cleaning old adhesive from the frame before fitting new back glass :(. I removed the logicboard, wasn't difficult to reconnect the two cables and gave me room to work. Thanks for the video, really helped.
Glad I could help
Love my suction cup pliers. Sometimes it just pops right off. Changed battery in iPad Pro A1584 and now touch doesn’t work. Screen is cracked but out was working before. Put a pick in batt connector when installing screen so just not sure wtf. Also replaced the charging port using low melt 183c solder. Easier than I thought and it charges. Any ideas? Can’t mail it to you. Did they start putting in the parts from the back on the 14? Nice video!
Now days I put a wedge next to the battery connector, you don’t want to accidentally bend one of the pins and have to repair that connector.
As for the touch not working. Have you tried another screen. The flex on that model is so short. It’s possible you tugged on it a little bit too hard. I’d either try another screen. Or id try reseating the 2 flex’s on the actual screen next to the daughter board
@@repaironwheels just got another screen today. Same results. Could it be the fpc connector?
@rancillinmontgomery2480 possibly. Do you have zxw and or a multimeter
@@repaironwheels I’ve got pretty much everything. Just watched a vid and have found that I have a burned filter(cap? Looks like a resistor)don’t know the value. I must have made a mistake somewhere and caused this. At 0201 it’s going to be a challenge. No coffee that day. What’s the likelihood of finding one on an old junk iPhone 6P. Update: ordered a set of magnetic ferrite beads of various ohms. Fancy name for filters I guess. 0402 is the smallest. Question is what’s the ohmage? They go from 0r to 2k.
The part you didnt know is the LIDAR module
the 14 doesn’t have a lidar. as of now only the Pro models do
@repaironwheels yeah, your correct. I did a housing rebuild in the UK and this part wasn't even present. The board connector wasn't in place either, had a black plastic square in its place.