BMW Xenon Headlight Bulb Replacement - 2000-2006 X5 (E53)
HTML-код
- Опубликовано: 2 ноя 2021
- The BMW Repair Guide strongly recommends removing the entire headlight assembly in 2000-2006 X5 vehicles to change the bulbs. This video gives detailed instructions on removing the headlight and replacing the bi-xenon high/low beam, angel eye, parking, and turn signal bulbs.
Need inexpensive replacement xenon bulbs? Purchase them at this link:
amzn.to/3EI9FTy
Need an angel eye bulb? Purchase them at this link: amzn.to/3CJvUIn Авто/Мото
Thanks for the video, that really helps!
THANK YOU!
The one you called "parking light" is actually the high beam bulb. By default they run as DRLs.
Thanks
Good info 👍
Right here
On 2002 X5 E53 - this is completely unnecessary to remove whole fixture. Changing bulbs (any of them) does not need assembly removal - Only 2nd air intake on passenger side, and air filter housing on drivers side / this will give you access to the bulbs. If replacing entire headlight fixture - You only need to remove the thin trim panel underneath the headlight assembly and screws to get it out. Recommend upgrades to LED from Halogen since they are now brighter.
What type of the bulbs use for all?
This will not work on a 2005 x5 4.4l bmw need to remove complete bumper cover to access bolts next to radiator.
Not good! too much for bulb replacement!!
Q
Typical bmw... always taking the wjole car apart for the simplest fixes
Not for the weak or the dull
This is not E53.
All this BS just to replace a bleeping lowbeam bulb ~ WTF???
Crazy