Another fantastic video! Is there much of a market for short tail swing machines in the US? I always thought that, given the size of everything in your country, conventional machines are more than enough. Over here 15t and 25t short radius machines are vital because house lots are worked on individually and they tend to be 6.4 square feet in size.
Thanks so much for the comment! Believe it or not, zero-tailswing machines are huge in the US. Especially concerning work on interstates, residential neighborhoods, and urban environments, having the ability to keep your tail end out of traffic (and out of your neighbors house!) is an enormous plus. The SANY machines that are zero tailswing have been very popular!
Ok. so I used to drive a syu150, I thinks that's correct. It had a safety frame to protect you from falling off, the bonnet could not be opened up fully as this stopped it, the bonnet would fall down on your head when doing checks. two steel pipes running to the q hitch would wear through as the clamp was positioned so the trip link would hit it when the bucket was on full un-crowd. Noisy in the cab due to poor sound protection. cab poorly laid out, blade lever in a bad spot. massively uncomfortable seating position for the larger operator with not much scope for adjustment. when you drop the blade it comes to rest on the ground and needs the driver to pressurize the circuit to stabilise it. Ignition key in a hard to use position. Not much storage in the cab for everyday items. Refuelling pump in the rear panel on the opposite side to the operator makes it very difficult to position the machine for refuelling.
Hey man, thanks for contacting! We’ve got those in the plans for too, so be on the lookout! Are you looking for more information on those guys? Here are some details on the wheel loader: www.newmantractor.com/sany/wheel-loader/sany-sw-405k And here are some details on the backhoe loader: www.sanyamerica.com/products/construction-equipment/backhoe-loader/slb95/
Thanks for asking! Our customers have been very happy with the SY155U. It's a small mid-sized excavator that is nimble and versatile but also powerful enough to act as the workhorse on a jobsite. Cam ơn vi đa hỏi! Khách hàng của chúng tôi rất hài lòng với SY155U. Đó là một máy đào cỡ trung bình, nhanh nhẹn và linh hoạt nhưng cũng đủ mạnh để hoạt động như một công cụ lao động trên công trường.
Thank you so much, Osti! It's awesome to get feedback like that from operators who have already gotten their butts in the seat. You've got some awesome videos yourself, friend!
Continuous Hydraulic Flow is standard on the SY155U. If you want to check out more stats, you can learn more about the machine here: www.newmantractor.com/sany/excavator/sany-sy155u-excavator Thanks for following along and for the comment!
@@85ccmaster No worries! Just wanted to make sure we answered any questions if you had them. Absolutely, let us know how we can help in the future and we would be glad to! Thanks for following along, man!
And funny thing is they have the best warranty and cat and John Deere are made in china now. So sorry to ruin your day. Also 90 percent of the stuff you own is made in china or another country
Good thing i know people at the port going to import my own alot cheaper
Kawaski pump?😂 it's russian kawasaki pump?
Another fantastic video! Is there much of a market for short tail swing machines in the US? I always thought that, given the size of everything in your country, conventional machines are more than enough. Over here 15t and 25t short radius machines are vital because house lots are worked on individually and they tend to be 6.4 square feet in size.
Thanks so much for the comment! Believe it or not, zero-tailswing machines are huge in the US. Especially concerning work on interstates, residential neighborhoods, and urban environments, having the ability to keep your tail end out of traffic (and out of your neighbors house!) is an enormous plus. The SANY machines that are zero tailswing have been very popular!
ive used one of these, bad points.....where do you want me to start??
Start anywhere you'd like. I want to hear this. Thanks
Ok. so I used to drive a syu150, I thinks that's correct. It had a safety frame to protect you from falling off, the bonnet could not be opened up fully as this stopped it, the bonnet would fall down on your head when doing checks. two steel pipes running to the q hitch would wear through as the clamp was positioned so the trip link would hit it when the bucket was on full un-crowd. Noisy in the cab due to poor sound protection. cab poorly laid out, blade lever in a bad spot. massively uncomfortable seating position for the larger operator with not much scope for adjustment. when you drop the blade it comes to rest on the ground and needs the driver to pressurize the circuit to stabilise it. Ignition key in a hard to use position. Not much storage in the cab for everyday items. Refuelling pump in the rear panel on the opposite side to the operator makes it very difficult to position the machine for refuelling.
Can we see the sw405k and the slb95
Hey man, thanks for contacting! We’ve got those in the plans for too, so be on the lookout!
Are you looking for more information on those guys?
Here are some details on the wheel loader: www.newmantractor.com/sany/wheel-loader/sany-sw-405k
And here are some details on the backhoe loader: www.sanyamerica.com/products/construction-equipment/backhoe-loader/slb95/
I am engener in g.t.c. sany's dealership in India
Plz can u give me a job in your country
Thank you for your comment! We have job listings available at www.newmantractor.com/careers if you are interested in applying!
bạn cho đánh giá Chất lượng máy sa ny 155u này thế nào
Thanks for asking! Our customers have been very happy with the SY155U. It's a small mid-sized excavator that is nimble and versatile but also powerful enough to act as the workhorse on a jobsite.
Cam ơn vi đa hỏi! Khách hàng của chúng tôi rất hài lòng với SY155U. Đó là một máy đào cỡ trung bình, nhanh nhẹn và linh hoạt nhưng cũng đủ mạnh để hoạt động như một công cụ lao động trên công trường.
Very good video ı user sany SY60C operation
Thank you so much, Osti! It's awesome to get feedback like that from operators who have already gotten their butts in the seat. You've got some awesome videos yourself, friend!
@@NewmanTractor thanks. I'm trying to do my best. I love my job👷👍🏼 operaor osti Works 😎
I’d you mention an automatic grease button? Or did I miss hear that?
Mr I'm very like video you and thank you Mr
how much to sell
Hey, man! Thanks for following along! You can find more information about the SY155U here: www.newmantractor.com/sany/excavator/sany-sy155u-excavator
What is the button for on the blade lever?
Wonder if continuous hydraulic flow is standard or a add on for these larger sanys
Continuous Hydraulic Flow is standard on the SY155U. If you want to check out more stats, you can learn more about the machine here: www.newmantractor.com/sany/excavator/sany-sy155u-excavator
Thanks for following along and for the comment!
@@NewmanTractor Pretty cool, just was wondering since smaller sanys dont have continuous flow
Absolutely! Which models are you interested in?
@@NewmanTractor im not in the market to buy another machine right now, just was wondering. Maybe later down the road i'll inquire about a demo
@@85ccmaster No worries! Just wanted to make sure we answered any questions if you had them. Absolutely, let us know how we can help in the future and we would be glad to! Thanks for following along, man!
My dream sany 155 ❤️
If you’re anywhere in Kentucky, Ohio, or Florida, come check out our lot! We’d be more than happy to help if you’d like to try it out sometime!
@@NewmanTractor thank you very much. I would be happy to be there and try someday in the future.🤗
No chinese equipment on my jobs!
god damn i love your words man, thumbs up
@@AutisticDigger87 Even CAT and Deere china now. I am staying with Japan or Korea Volvo Komatsu
curious if you typed that on your Chinese computer or Chinese made phone?
And funny thing is they have the best warranty and cat and John Deere are made in china now. So sorry to ruin your day. Also 90 percent of the stuff you own is made in china or another country
@@shigh1854 Bullshit...I will stay with Komatsu no china .
Any country is ok except evil ccp china slave prison.