Hey can you do me a very very big favour and make a short clip of the rearbrake caliper mount of that scott sportster? I have an attacama frame as project but with v brake mounts. The frames seems to be exact the same. If there is a possibility for discs it would change the whole project. What a amazing coincidence :D
1 - A 2 - it will apply mutch more tension on the stand bracket 3 - all moving parts, such as drivetrain, chain, derailleur, suspensions and dropper post
1. A. Yes you can 2. If the bicycle is horizontal then it can put undue tension on where the bicycle is clamped as well as the stand itself. 3. The moving parts, so the drivetrain, the damper, the front suspension fork and dropper post.
I am 15 and I have a bike fixing business and I always go through with the customers how to properly lube their chain because 9 times out of 10 they put the live everywhere over everything then the jockey wheels get clogged, chain is black from grease and there is significant wear on all drivetrain components.
1. A 2. Because the bike may not be equilibrated and fall down 3. clean and lubricate the chain and drivetrain and also suspension parts & dropper post. Basically moving parts
1) A 2) Because if you remove a part, such as wheel, you may upset the balance of the bike, causing either damage to the stand or making the stand fall, possibly damaging the bike as well. 3) Any moving parts. Question #1 from me: I noticed an old frame with the derailleur on the wheel axle! I have a similar frame on a bike, with the following issue: where to find a derailleur that can be attached there? That spacer attachment does not exist anymore, and it's not an easily removable/changeable part. When I wanted to replace the derailleur, I found I could not. Meanwhile, that stabilizing screw hole is difficult to access when in a pinch (the cassette side nut is impossible to hold on to without a closed spanner). Question #2: Dutch bikes tend to be heavy. Mine is also built for heavy duty, and it is REALLY heavy. It takes all my strength to pull up to the stand; then the height is not great since I can't put it high. It's also impossible to elevate after clamping, since the weight makes it impossible to have enough leverage. I have a stand similar to one in the video (with the red grip). Do you have tricks outside brute strength? Question #3: How about suspending a bike from the ceiling? Sometimes, wall space is at a premium...
1. A 2. Puts more tension on the stand plus rear shock can be in the way. not ideal for my cheap bikestand. 3. Drivetrain plus all moving parts on forks and rear shock.
Hello I am the brand owner of kapvoe glasses (a company specializing in sports sunglasses) I watched your video analyzing your product Your video analysis is very professional great Can I send you some kapvoe brand glasses for testing? Looking forward to your reply Thank you
haha everytime I'm at a store with my mtb and I have to use those stupid bike rack thingies. I always hated using them because ppl here or the wind will try and ruin the rims. With my mtb..the moment I want to leave I lift up the entire rack with some other bikes cause my wheel is stuck in there. And I live in the fucking Netherlands..the country made for bikes. Love your content
I had to leave my bike outdoors a few times and my bike's chain has... Rusted? I heard someone say that it's not rust. Help! Video suggestion: a "normal people" video where you take no maintenance of your bike for a month whilst leaving it outdoors regularly - how to fix the bike after.
06:13 enter the Merida Big Trail 600! I wanted one of these here in New Zealand but they never imported any so I had to get a Giant Fathom instead. Have you posted any riding videos of this one?
The big trail was one of the reasons I clicked to watch the video so quickly. Wanted one as well but also no import to South Africa. Would also be interested in seeing some riding vids.
1. A. Yes 2. Because it puts more tension on the teeth of the bike stand and also on the clamped part of the bicycle i.e. commonly the dropper post. 3. Drive Train, Damper, Suspension fork, and Dropper Post - parts that move and can cause wear and tear due to friction or being dirty.
1- (A) Yes, you can clamp the dropper post. Not too tight. 2 - because the bike will be ‘cantilevered’ which will cause stress to the bike/seat post and work stand itself. 3 - Drive train - cassette, chain, chainring, and both derailleurs.
1. A 2. To make sure the teeth in the stand are not under too much strain, and your posture during the repair to make it easier. 3. The moving parts like the the suspension and drivetrain components.
1.) A 2.) Your bike may fall down or tongue your bike stand. 3.) Clean and lubricate your chain and drivetrain and also suspension parts & dropper post.
1: A 2: Make sure the bike's weight is distributed so it doesn't put too much tension on where the bike is clamped and the stand itself. 3: Cleaning the moving parts: drivetrain, demper, suspension dropper
Hi. Are there any issues to hanging the bike on the wall with the rear wheel up? Required when there’s multiple bikes and little space so alternating front wheel/ rear wheel up between bikes saves space.
1. C 2. It puts a lot of tension on the v-theeth of the stand and dropper or seat post. 3. Drivetrain components, front and rear suspension, moving points and dropper post
So glad to find your Channel! I hope you aren't offended that I also Love your Accent! It is so heartwarming that you address Us as Students, and you show the Mechanics determination to care for the customer! And you teach the mechanic to teach the customer as well! I wish there were more Bike Gurus like you!
Kanola oil contains a lot of volnerable polyunsaturated oils which spoil quickly . Why not to try coconut oil which contains mainly saturated fats?
Very satisfying and Nice video! Hello from Ukraine!
Hey can you do me a very very big favour and make a short clip of the rearbrake caliper mount of that scott sportster? I have an attacama frame as project but with v brake mounts. The frames seems to be exact the same. If there is a possibility for discs it would change the whole project. What a amazing coincidence :D
1 - A
2 - it will apply mutch more tension on the stand bracket
3 - all moving parts, such as drivetrain, chain, derailleur, suspensions and dropper post
1. A. Yes you can
2. If the bicycle is horizontal then it can put undue tension on where the bicycle is clamped as well as the stand itself.
3. The moving parts, so the drivetrain, the damper, the front suspension fork and dropper post.
I am 15 and I have a bike fixing business and I always go through with the customers how to properly lube their chain because 9 times out of 10 they put the live everywhere over everything then the jockey wheels get clogged, chain is black from grease and there is significant wear on all drivetrain components.
1. A
2. Because the bike may not be equilibrated and fall down
3. clean and lubricate the chain and drivetrain and also suspension parts & dropper post. Basically moving parts
1) A
2) Because if you remove a part, such as wheel, you may upset the balance of the bike, causing either damage to the stand or making the stand fall, possibly damaging the bike as well.
3) Any moving parts.
Question #1 from me: I noticed an old frame with the derailleur on the wheel axle! I have a similar frame on a bike, with the following issue: where to find a derailleur that can be attached there? That spacer attachment does not exist anymore, and it's not an easily removable/changeable part. When I wanted to replace the derailleur, I found I could not. Meanwhile, that stabilizing screw hole is difficult to access when in a pinch (the cassette side nut is impossible to hold on to without a closed spanner).
Question #2: Dutch bikes tend to be heavy. Mine is also built for heavy duty, and it is REALLY heavy. It takes all my strength to pull up to the stand; then the height is not great since I can't put it high. It's also impossible to elevate after clamping, since the weight makes it impossible to have enough leverage. I have a stand similar to one in the video (with the red grip). Do you have tricks outside brute strength?
Question #3: How about suspending a bike from the ceiling? Sometimes, wall space is at a premium...
Last time I lubricated My DH Bike with 1x10 Shimano Saint Drivetrain I used Hair Clipper Oil by WAHL . Has anyone done this ?
1. A
2. Puts more tension on the stand plus rear shock can be in the way. not ideal for my cheap bikestand.
3. Drivetrain plus all moving parts on forks and rear shock.
Hello
I am the brand owner of kapvoe glasses (a company specializing in sports sunglasses)
I watched your video analyzing your product
Your video analysis is very professional
great
Can I send you some kapvoe brand glasses for testing?
Looking forward to your reply
Thank you
haha everytime I'm at a store with my mtb and I have to use those stupid bike rack thingies. I always hated using them because ppl here or the wind will try and ruin the rims. With my mtb..the moment I want to leave I lift up the entire rack with some other bikes cause my wheel is stuck in there. And I live in the fucking Netherlands..the country made for bikes.
Love your content
I had to leave my bike outdoors a few times and my bike's chain has... Rusted? I heard someone say that it's not rust. Help!
Video suggestion: a "normal people" video where you take no maintenance of your bike for a month whilst leaving it outdoors regularly - how to fix the bike after.
Get a small section of pipe insulation from plumbing hardware store leave in Jaws of stand, I always secure bike at top tube.
Hi Danny, still snow in March? Hoevsrevyou liking the ebike MTB?
Hey Einstein, you know a pressure washer forces dirt and moisture into your bearings and seals??
Love the video's and having a quiz after. What did you put on your brush to clean your bike.
6:15 it's dream trail hardtail! Is it Merida Bigtrail?
Is Brunox ok to use on carbon? couldn't find information to confirm on the internet.
What's the bike on the thumbnail? Can someone give me the specs?
2 months without a video, what's going on, are you all fine 🥺
1 a
2 it will create to much stress on the locking teeth.
3 the moving parts.
i have never washed my bike and serviced since 6 years and i ride it on the the worsts potholed roads in india
U should get some muc-off products to wash your with much better results
06:13 enter the Merida Big Trail 600! I wanted one of these here in New Zealand but they never imported any so I had to get a Giant Fathom instead. Have you posted any riding videos of this one?
The big trail was one of the reasons I clicked to watch the video so quickly.
Wanted one as well but also no import to South Africa.
Would also be interested in seeing some riding vids.
10 times better then the mustache muck off video
Do you ride that jump bike?
1. A. Yes
2. Because it puts more tension on the teeth of the bike stand and also on the clamped part of the bicycle i.e. commonly the dropper post.
3. Drive Train, Damper, Suspension fork, and Dropper Post - parts that move and can cause wear and tear due to friction or being dirty.
1- (A) Yes, you can clamp the dropper post. Not too tight.
2 - because the bike will be ‘cantilevered’ which will cause stress to the bike/seat post and work stand itself.
3 - Drive train - cassette, chain, chainring, and both derailleurs.
No music please.
this is electric bike
1. A
2. To make sure the teeth in the stand are not under too much strain, and your posture during the repair to make it easier.
3. The moving parts like the the suspension and drivetrain components.
1.) A
2.) Your bike may fall down or tongue your bike stand.
3.) Clean and lubricate your chain and drivetrain and also suspension parts & dropper post.
I had bad experience in hanging the bike vertically. It destroyed the damper seals on my manitou markhor 😂😂 i stored it for about a month or two tho
1: A
2: Make sure the bike's weight is distributed so it doesn't put too much tension on where the bike is clamped and the stand itself.
3: Cleaning the moving parts: drivetrain, demper, suspension dropper
can i get a bike
OMG the snow and mud combination is awful. That crunchy gravel grinding the drivetrain 🤯
1: A; 2: the horizontal position can stress teeth on stands with teeth; 3: Clean the moving parts: drivetrain, suspension, &c.
I've been a fan of your channel specially with you riding Merida bikes and your bike tutorials another informative video sir .Kudos to you
Hi. Are there any issues to hanging the bike on the wall with the rear wheel up? Required when there’s multiple bikes and little space so alternating front wheel/ rear wheel up between bikes saves space.
1 a
2 you’ll apply unwanted tension to the stand
3 The uppers + seals of your fork, drivetrain, dropper post and
1. C
2. It puts a lot of tension on the v-theeth of the stand and dropper or seat post.
3. Drivetrain components, front and rear suspension, moving points and dropper post
Excellent, useful and basic information! Thank you so much.
1 A, 2 puts more stress on the stand pivot, 3 clean the moving parts, forks, shock, dropper
Early!
Great video
Hello
Dobra robota B-)
So glad to find your Channel!
I hope you aren't offended that I also Love your Accent!
It is so heartwarming that you address Us as Students, and you show the Mechanics determination to care for the customer!
And you teach the mechanic to teach the customer as well! I wish there were more Bike Gurus like you!
Hi