Jared Reall Sorry i dont have more footage. Just be carefull and you should be fine. Remember to unplug the fan and the LED when you remove the stock cooler. The wires are very short so dont rip them out.
hey quick question, I installed my block last night, no prob, but when i installed the backplate, i noticed the thermal pads that go on the the back of the memory chips(the pre-cut ones) dont make contact with the BP. is this right? All my other pads made contact with metal
So i just realized something. I'm installing this on a reference 980 Ti... there are no Ram modules on the backside of the card where the .5mm pads should go. I am assuming the Titan X (with double the VRAM) DOES have these chips on both sides of the board?
Welp. I'm an idiot. Finally found someone who posted this same issue. the Ti in fact has no memory modules on the back, so i can skip those pads entirely, otherwise Im set!
Absolutely no reason to WC the Titan gpu. Mine runs 45% OC'd on air at 30% fan speed. Now my i7-5820k requires WC to get to it's 5.2ghz (a 1.9ghz OC) which I accomplished a custom swiftech aio setup but i dumped WC of gpus since the days before ati 9500 pro on a Shuttle mATX setup.
I have 2 of these cards with the same blocks running at 1590mhz. I actually put some TIM on the thermal pads also for ultra low temps.
Didn't effect your system in overall temp by using only the one 360 radiator for both cpu and gpu?
Thank you so MUCH for this!!! about to install my first water block ever! And on a titan X kinda scares me!
Thank you so much for this video man. This video is very useful for me. Thank you again
What water block did you use?
Do you have the full installation video? I'd like to see every step. :D If that's possible!
Jared Reall Sorry i dont have more footage. Just be carefull and you should be fine. Remember to unplug the fan and the LED when you remove the stock cooler. The wires are very short so dont rip them out.
Thanks man. I've looked at the instructions and seems easy enough.
Hello! After you done all this, is it only to plug in and play ? My friend says I need some short of pump or something ?
kennta340 You need a complete water cooling loop.
hey quick question, I installed my block last night, no prob, but when i installed the backplate, i noticed the thermal pads that go on the the back of the memory chips(the pre-cut ones) dont make contact with the BP. is this right? All my other pads made contact with metal
Eddy Roth They should all make contact, dont know what went wrong there. If you fasten the screws they should all touch.
So i just realized something. I'm installing this on a reference 980 Ti... there are no Ram modules on the backside of the card where the .5mm pads should go. I am assuming the Titan X (with double the VRAM) DOES have these chips on both sides of the board?
Welp. I'm an idiot. Finally found someone who posted this same issue. the Ti in fact has no memory modules on the back, so i can skip those pads entirely, otherwise Im set!
Eddy Roth Ah now it makes sence.
Eddy Roth i'm a week late to the party. i was going to help you. oh well.
Getting ready to do this to my 980 ti.. same waterblock.
1450 MHz with stock cooler and Air2Max bios, now im going with EK LQ, hope to pass 1500 on both cards (SLI).
BTW ASIC 62.
Hello sir,
Please how score graphics with 3dmark firestrike?
What fittings are you using?
Henry Edwards standard G1/4 compression fittings
I meant, what brand? :P
Henry Edwards Dont remember. I ordered them from aquatuning. I think its a no name hous brand. They are just fittings after all.
Absolutely no reason to WC the Titan gpu. Mine runs 45% OC'd on air at 30% fan speed. Now my i7-5820k requires WC to get to it's 5.2ghz (a 1.9ghz OC) which I accomplished a custom swiftech aio setup but i dumped WC of gpus since the days before ati 9500 pro on a Shuttle mATX setup.
now that vs 980 ti hybrid
AHHHHHH!!! AMAZING!!! dfjhfdjhfgdhvb dk
How to draw an owl:
1. Draw a circle.
2. Draw the rest of the fucking owl.
I got a square.