Wasp Warrior WW-01 Little Buddy the Ultimate improved KO MPM3 Bumblebee
HTML-код
- Опубликовано: 3 окт 2024
- Revisando Transformables Wasp Warrior WW-01 Little Buddy the Ultimate improved version of MPM3 Bumblebee, espero que os guste. GRACIAS POR VERME.
Revisando Transformables Wasp Warrior WW-01 Little Buddy the Ultimate improved version of MPM3 Bumblebee, I hope you like It. THANKS FOR WATCHING.
Revisando Transformables en:
/ revisando-transformabl...
/ revisandotransformables
weibo.com/u/74...
#revisandotransformables
![WW-01 WASP WARRIOR (MPM-3 KO BUMBLEBEE) UNBOXING! | THE GOOD & THE BAD! [Teletraan Unboxings 65]](/img/1.gif)
The inner chest panels should be facing downwards to make it movie accurate, lol
Thanks for commenting, good appreciation friend, greetings ☺️
You can adjust them to be that way
@OldDorito-zm1xc Thanks for commenting, correct, they can be put in both directions for everyone's taste, greetings 😊
I wonder how cool it’d look if someone made a repaint (slight changes to sculpt and maybe some additions) to make the rotf version of him
Thanks for commenting, good contribution, best regards 😊
I'm getting mine tomorrow, I've recently subscribed, because your videos our top notch. You deserve more followers, quality is excellent
Thank you for your comments and for your unconditional support, enjoy the figure, best regards 😊
What site u used for ur order cause I want one
Thanks for commenting, I use the online purchase on two pages mainly, Showzstore and TF Direct. Right now these sites have it out of stock, they only have the black version that came out recently. In any case, let's trust that they can bring more figures, greetings☺️
@@RevisandoTransformables how long does it take to deliver if u order from show z store or tf safaris
Hello again, thanks for commenting again... I have never bought in tfsafari, I was talking about TF DIRECT and Showzstore. In these places that I told you about, if they have stock to deliver, it usually takes between 15 and 20 days approximately, regards 😊
La compañía que mejoró el detalle de pintura del MPM 3 y agregarle unos pequeños detalles la hace ver fantástica, sobre todo en el aspecto de pintura metálica. Debo admitir también que mi Bumblebee favorito es el de DOTM y espero con ansias que usen este molde para crearlo, pero aún así esta figura se ve impresionante
Gracias por todos tus comentarios, creo que este molde perdurará en el tiempo como lo mejor que se puede crear hasta la fecha de Bumblebee películas en versión Camaro..... espero equivocarme en mis palabras y de repente creen algún ingenio, saludos ☺️
Thanks for the video mate, I couldn't have transformed the figure with your help.
Thanks for commenting, best regards 😊
P.S. with or without your help 🤔
@@RevisandoTransformables sorry without haha
@iambrunogay Thank you for commenting, then I am very glad to have helped you, greetings 😊
ordered this one yesterday based on this video and one other
Thanks for commenting, you'll see how it doesn't disappoint you, if you don't have another model you'll like it even more, thanks for watching my videos and for your support, regards☺️
Because of Magnificent Mecha MM-01 Optimus and Cyber Era CE-01 Bee. I wished they make this oversized too, also since Thunder Leader Optimus is bigger too.
Thanks for leaving your comments, it would be nice, if it is manufactured with all these improvements. As you already know, Blue Circus already made their oversized bee MPM3, greetings ☺️
@@RevisandoTransformables yeah, Blue Circus is just oversized, no improvements or even a light up features.
thunder leader and this one scale amazing, be was 16’2 ft in the movies this one is 17 cm, so it’s actually in scale
Im gonna buy this figurine tomorrow. It looks so good and cool and ir almost looks exactly like the masterpiece except eith a little better design. This is definitely something i cannot not buy
Thanks for commenting, I haven't regretted it, I would have liked it to have come out the same size as the Blue Circus one, but hey, it's not bad in Masterpiece scale, greetings 😊
Excelente tutorial. Te felicito!
Gracias por tus comentarios, saludos cordiales 😊
how tall is he
Thanks for commenting, it has the same dimensions as the mpm3, Masterpiece scale, greetings 😊
Sin duda alguna este es el Bumblebee perfecto ( por ahora )
Gracias por comentar, sin duda han dado con la solución a lo que había, a mi personalmente me hubiera gustado un Oversized similar al de Blue Circus en tamaño, saludos 😊
@@RevisandoTransformables No es igual a Blue Circus, sino en tamaño?
@michaelscholes8956 gracias por comentar, si lo sacarán en tamaño BC seria maravilloso, saludos y gracias por sus aportaciones 😊
@@RevisandoTransformables pero no son iguales en cada otro aspecto?
Much better than the original. Cannot wait than my ko bee arrives to my autobots collection. So far just ko ls Jazz (the silver phantom) and takara japan version optimus prime official 04 mpm but japan version with grey and not black. So with bee I have 3 mpm autobots and one decepticon barricade. The reason why i bought ko jazz is the price better paintjob black windows and blue visor. The same reason why i bought this wasp warrior bee the better paintjob price and better mold than official mpm
btw its not laser cannot bruh, but some ion blaster I quess
Thanks for commenting, we think the same, it's a fantastic Bee, I love it, let's hope someone thinks of a larger one, 21 CMS would be good for the OS scale, greetings☺️
17:54 is Dino, not MIrage. Cheers.
Thanks for commenting, Mirage (nicknamed "Dino"), I think that's how it is, but we know who it is ☺️, greetings 😊
@@RevisandoTransformables You're right. Trademark issues. I was not aware.
13:00 How well does he stand with the different feet?
Thank you for commenting, I have no problems when it comes to keeping it upright, as I always say with this mold and I am referring to its origin, you have to find its balance from its lower extremities, greetings😊
You showed that the wings can rotate down (10:00), but can they rotate up as well?
Thanks for commenting, the wings turn downwards in the way you have seen but upwards only minimally, only to see them in a pose position, they cannot turn as sharply as downwards, regards ☺️
what figures were those skids and mudflap figures?
Thanks for commenting, to your question, the Skids and Mudflaps characters are from the Human Alliance series of figures from the companies Hasbro and Takara Tomy respectively, I leave you a link to my review in case you want to see it ruclips.net/video/ftKO7Jl_7nY/видео.html , greetings ☺️
How did u get the autobot mark on head?
Thanks for commenting, I got the logo from a pack of stickers that are sold online through eBay, although currently the store where I got this figure, Showzstore, usually sends a mini pack of autobot logos and depecticons of various sizes, greetings ☺️
How is it solid compared to LT or MPM?
Thanks for commenting, in appearance they are similar to those two figures, when it comes to making a comparison in terms of the fit of the parts, joints and the new changes that are seen in the review, compared to the mpm, since I do not have the LT01, I would tell you that the ww01 has fewer things moving, everything remaining in its place at the time of posing. As for plastics, I don't see any differences, except for the central bar that joins the trunk and lower extremities, which looks more flexible in this figure, greetings 😊
Que tal la estabilidad de esta figura? Hablando de ese talón nuevo claro
Es igual o peor que el Mpm original?
Gracias por comentar, en concreto a lo que preguntas , yo no he notado inestabilidad, la figura se sostiene perfectamente con esa nueva mejora, saludos ☺️
Were can i buy figurines like this?
Thanks for commenting, I bought it through the online page at Showzstore, right now there is no stock, greetings ☺️
Thanks!
This figure would be perfect if they kept the orignal heel spurs, mine is a pain to get stood up straight
Thanks for commenting, try to find a good balance, for this the trick is in the knees, they must be at their maximum opening, then you must balance or compensate your hips. This also happened in the Masterpiece, it is not a problem with its foot supports, whether one or the other, you have to counteract the weight of the upper part, where the wings and wheels are housed, which is what makes this mold unbalanced when looking for good stability, greetings 😊
@@RevisandoTransformables awesome thanks for the advice
You can bend the heel spurs down to improve balance
@michaelscholes8956 Thank you for commenting, many times the balance of a figure is in its feet, in this case it would be looking for balance in its waist with the verticality of its extremities, greetings 😊
Hey amigo, revisaras el scavenger de mechanical team que va a salir? Saludos
Gracias por comentar, por supuesto, en cuanto me llegue, cuenta con el, saludos 😊
Tiene partes de metal bro?
Gracias por comentar, a tu pregunta te informaré que las partes de metal se encuentran en la cabeza, parte superior de la sobre-máscara, y principalmente en la extremidades inferiores, hallándose en las espinilleras, en las punteras de los pies, en los salientes que hay encima de estos, y en los nuevos apoyos internos de los pies, saludos 😊
I hope this figure is worth the money because I’m planning on buying it and I would like to know where did you buy it from ?
Thank you for commenting, it will not disappoint you, be delicate and patient with it, I'm telling you nothing strange with this type of figures, you will come to like it, you can get it at Showzstore, also the black version will be available very soon in this same store, regards cordial 😊
@@RevisandoTransformables what do you mean by delicate and patient…does it break easily ? 😅
@@siddhantdas1069 The only delicate part is found at the junction of the trunk folds, there is a longitudinal piece like a ribbon that rests on the central part of the waist, if you know the Masterpiece, when it transforms, you will see that you can make a total stretch of the figure, differentiating the lower extremities on one side and the trunk and arms on the other, well what remains in the middle are two strips, in the Masterpiece and even in the KO these two pieces are of similar thickness, well in this figure, one of them is a little weaker and it is at this point where you have to be more delicate, I already have several transformations and everything is fine, regards ☺️
@@RevisandoTransformables well as long as you didn’t break it…it’s fine 😂😂 but thanks though…after watching your video…I will buy it 😄👏😁
@@siddhantdas1069 Follow my video step by step and you won't have any problems, cheer up 😉
What’s the exact size of this figure from top to bottom in robot mode And also length of the car in vehicle mode ? 😄
Thanks for commenting, as I show in the video, in robot mode up to its head 17 cm, up to the top of the doors 18.5 cm and in its vehicle mode, 16.3 cm long by 4.7 cm wide high by 7.3 cm wide...same measurements as the MPM3, regards ☺️
Hmm
Does anyone know how to properly tighten mpm Bumblebee’s head since I’ve been looking around on the internet since I’ve too afraid to jump into it blind and accidentally break something.
Mostly since I know the hood and the part the head is screwed onto are two different parts, I just have no clue if there’s any way to untab them nor where the tabs sit
Thanks for commenting, to the question you ask..., if you have disassembled the head, you will see that the rotating neck is anchored to a rotating plate of the hood. This neck is fixed to this plate with a blind pin, screw type, it will probably have a thread at its end but its head is flat. To get to this screw and if you want to replace it with an adjustable one you will have to do several things.
-First, disassemble the rotating plate, which, as you say, is double and is held by a pin. To remove this plate you have to remove the front of the vehicle and the side parts of the hood. Once you separate these parts, you will be able to remove it and work more comfortably with it.
Second, once you have this part that is the one that interests us, we observe the pin. At this point I can tell you that you have to remove it first because it is the one that joins the two plates in this part. By removing the pin, the two pieces come apart easily. Once separated, we focus on the part where the neck joins, which is what you are interested in trying to tighten the rotation of the head, there you will see a hole where the blind bolt is housed, from here on it is your decision replacing it or doing what you think is convenient, regards☺️
Is the yellow painted?
Thanks for commenting, if you mean the version, if it's the yellow bee version, it's not your own repaint, regards☺️
it's almost entirely yellow plastic, with some minor details painted yellow, such as some forearm detail, side of chest, and outer heel spur, as well as parts of the head I think.
@michaelscholes8956 Thank you for commenting and for your contribution, correct, you have made a good summary, you missed the yellow of the lower wings, greetings 😊
@@RevisandoTransformables I finally got mine into alt mode. Seems the entire roof is painted too.
@michaelscholes8956 Thanks for commenting, that part was not correct, a small part of the rear glass in vehicle mode 👌, greetings 😊
Where can I get the human figures?
Hello, thanks for commenting, I think the figures that appear in the video without Charlie, Sam Witwicky and Frenzy. The last two are figures that come with the Transformers Human Alliance editions of Bumblebee and Barricade, currently these editions if you are looking to find something in the online purchase, I got them on eBay, but it is becoming more and more complicated. Charlie's character comes with the Jada Toys Bumblebee model vehicle, the latter is currently available, it is a 1:24 scale beattle and the figure comes to you, greetings ☺️
@@RevisandoTransformables You're awesome for responding! Thanks! I used to buy transformers toys as a kid and now I'm trying to get back into the hobby.
Is this a reissue of mpm 3 bumblebee
Thanks for commenting, let's say it's a KO reissue of the mpm3 mold that includes improvements that make this beloved character even more attractive, greetings 😊
@@RevisandoTransformables but what updates you want in the toy
Thanks for commenting, if you have seen the entire video you will see that they are quite important in the sense of design in various areas. Needless to say, the paint finish looks great, but that transformable chest, that change of supports on his feet, I think they make you love this toy a little more, right? Greetings ☺️
@@RevisandoTransformables well my updates that the size needs to goes in 36,1 and be more detailed and have more drybrushing and high lights and the hand articulation be on masterpiece g1 starscream articulation level and have a led on his eyes
@@RevisandoTransformables but still can transform but to be a little bit more detailed
T pose
Thanks for commenting, greetings ☺️
Is there any diecast parts on it?
Thanks for commenting, this figure has very few parts in die cast but it does have some, all of them in the foot area and the top of the head, greetings 😊
Thanks bro, I was going to buy the Lts-03c but I found out that there was no diecast on it and it’s pretty much all plastic.