This video may be seven years old, but it showed me a tool and how to use it to remove my broken bathtub drain today. Thank-you for leaving up this video on RUclips.
This is a woman watching and you saved me!! My drain was corroded like yours and that removal tool was a lifesaver! I thought I was going to break the damn tub before I tried the tub drain extractor!! Thank you!!!
Thanks so much for this video. I actually BROKE my drain removal tool because my spout was so corroded and stuck. I showed this video to the local plumbing store and they let me borrow this tool and it popped it right out. Great stuff.
That's the extractor tool!!! I've been holding off this job a month thinking if the pliers didn't work, people said I might need an "extractor tool" as if it would be a large complicated expensive plumbers device!! It's basically an oversize bolt. Thanks for the stress relieving video!
That's the extractor tool ! It's an oversized bolt! ...well... it's hardened and knurled and fits into the drain. I'm glad it relieved some stress. Hmm, I need to look into videos that relieve stress... Glad it helped bud!
Thanks for the video, this totally worked! Home Depot did not list the drain removal tool in their online inventory, but I found one there anyway for about $20. I recognized it only because I saw this video first, then was browsing the shelves for some other replacement parts and noticed it tucked away in the corner. Thanks again!
Thank you so much for posting this. I needed to replace my grandparents drain and this is what I was looking for. You have no idea. You are a life saver.
Thanks for telling me that. That's really why I did it. So many projects it's been kind of a cussing bad deal. I'm hoping we can show each other how to do stuff. Works for me! There is something you know how to do Stephanie that we don't! Please try to show us. Thanks!
I could not find an extractor in town so I used a large screwdriver and tapped the handle in the drain. I’m good to go. Thank you for the video it got me thinking in the right direction.
Boy I needed this video, old house was here when my Dad was a boy, he was able to buy from the people across the street where he grew up & where my 93 yr old Grandma lives now. Old brass drain with no metal to put the one tool on, so I guess I'll spend 20$ on the drain extraction tool. Underneath brass nut to pipe doesn't want to come loose. This video saved me on the top portion, I think I got it from here, thanks Dave.
Habor freight heat gun Heat the nut it will expand Cool water in the pipe will help keep the pipe smaller When changing oxygen sensor I put wrench on start car try to turn When exhaust hotenuff it just gives
Yours went so much better than mine. About a dozen different tries hammering woke my neighbor, elbow grease, sweat, profanity and so much more! Thanks man good vid 👌
Thanks for the video demonstrating the removal of broken spud which helped me to change my drain. It was difficult to turn the drain with the drain key & wrench. So I turned on the hot water for some time which helped me remove the drain with the drain key & wrench. The handyman gave an estimate of $575.
WOW!!! I can't believe I found this fantastic video! Thanks a million! I'm very excited now about removing the drain. Thanks again! I've been telling everyone about this video.
Well it was really frustrating for me too. It's amazing how the little things can get ya. If you know how to do something, chances are somebody else doesn't. Put it on here! I'm rooting for ya!
My dad has that exact socket wrench, which he had for at least 40 years. He bought quite a few newer craftsman socket wrenches over the years, and the old craftsman like the one you have outlasted all of them. Hang on to that wrench, you can't find any made as good as that one anymore.
You're welcome. My pleasure. I'm a machinist -- I recognized it would work. But the real thanks goes to the people who made the tool. Thanks for commenting!
I've removed a hundred tub drains using all types of methods. Any tub drain extraction tool with auto size adjust and grippy nibs on it like this one works best.
And if that don't work, break out the sawzaw with a fine metal blade! Put paper towel in the drain to protect the bottom. Then carefully cut two slits. When you get close to cutting through stop! Use a small common screwdriver and pry the cuts until it pops out. GL
What if the drain has been siliconed in around the ring we live fourth floor of condo and the plumber siliconed the drain in so it couldnt leak when new now its 13 years old and coroaded an i can not budge it and i dont want to break the fibergalss tub thanks
Take a hack saw blade cut down the inside of the old drain ,takes a couple of minute's, then with a screwdriver slide it down one side between the drain and it's fitting threads .The drain will split ,bent it and take it out. Your cost for tools 50cents for the blade and doesn't everyone have a screwdriver.
That's a Dream Scenario for a lightly corroded bathtub drain.....half the time it won't come out so easy when badly corroded. Then the last resort is using a Sawzall with fine tooth blade and carefully, slowly cut until you can remove it with some pliers....Been there; done that.....
thanks for this video. I'm curious how ours is gonna turn out since the drain is badly corroded. I'm afraid it is just gonna break into small pieces and not come off cleanly. been wanting to learn how to do stuff like this and this is probably one place to start. will probably try to record and share it in my channel, whether it is successful or not. thanks again. new subscriber here.
Wow! Thank you! Here is how to hug me -- there is something you know how to do. You can help. See if you can film it and post it. All these comments. Helping people is pretty addictive. Thanks for commenting!
Right on. My predicament with two drains that just collapsed when I tried to remove them. I knew that there was no bloody way the removal tool would work. These drains are way too brittle to withstand the pressure needed to turn them. Well, back to Home Depot to hopefully find that second remover.
Is there any way to repair the corroded part of the bathtub drain without replacing it with a new one? Is there any coating solution to stop the corrosion?
I open and when I try to connect what happened is the one under the tub it loose and fell under now how I will connect can you give me any tips thank you
Tried the drain extractor tool. Doesn't work on a drain that's been in the tub for 50+ years. The tool doesn't bite like an easy out. Hacksaw, dremel cut-off wheel, hammer and chisel did the trick, taking out quarter section at a time. Old master plumber told me that's way he's always done it.
ps429 I’m trying with traditional smaller tool just broke off the cross piece was about to go buy tool shown here but I’m dealing with an 80 year old tub so should just jump to your method 👍
@@ronhendon6381 You could try the extractor shown here first if you have a hardware store with an easy return policy (Home Depot, Menards, $20) and simply tell them the tool doesn't work or fit. That's what I did. Just go slow with cutting out pieces. You don't want to cut too deep and damage the pipe threads. I also sprayed some Blaster Penetrant oil to help loosen up some of the old putty. Good luck.
That "tool" did not work in my case. The waste was just smaller then 1 1/2" so couldn't hammer the damn thing into the waste to get a grip. Not sure what to do now ....
Binh Minh Pham , you can see on the video that he is going counter-clockwise. in the US we say "righty tighty, lefty loosey", meaning the direction you spin. Hope that helps.
I like that. I always wonder which way to unscrew something, now I know. I had followed the manufacturer instruction listed on the back of the package, turning the 1/2" racket wrench counterclockwise, but it didn't work. I was confused when he turned both directions at the 2nd attempt. Neither way works for me. As a last resort, I carefully cut through the corroded, stubborn spud with a hacksaw blade and it worked without any damage to the PVC drain shoe and the tub. (a hacksaw blade + heat+ lubricant + screwdriver + patient)
This tool is better than the cheaper one. But even this superior tool need lots of muscle power if your drain is old. Also 1/2 socket wrench is not used at home. So you will need to buy a new one . If you are old and the drain is old then call your plumber.
Thank you for the video, I have been trying to get a plumber to come out but it must be too cheap of a job that they are not coming for so little!!! Now I was afraid that the piece underneath the tub may drop down bellow the house after removing the piece! Is that underneath piece hooked up to the tub that he actually will not fall off? Thank you very much that may only be a simple fix. 👏
Lol mines broken the opposite way. The threaded end snapped off the top metal lip. So hoping it'll just be a putty knife for the upper part and then use the drain key tool to twist out the threaded part from the bottom. It's kinda floating around under my tub so hopefully won't be to hard to get it to thread in the new one lol
I have a leak possibly at the drain. Will replacing it fix the problem? Plumber believes pulling out the tub is the only way to be certain. Also, won't the PVC tube move or drop once the the drain is removed? How do you keep it from moving?
I've seen a plumber use a socket wrench about 18in long to get out the drain. I have also seen a plumber take a saw and cut the damn thing out. Sometimes it's so corroded, one cut and the whole thing basically falls apart!
How do I measure the circumference of my drain? There is so much corrosion. Around the inside of the rim appears to be 1.75 in". With all if the corrosion however is 1.5" . 35 yr. Old drain. Will this tool be big enough to remove my drain that looks like its been in the ocean for many decades. Like your vid. I hope this tool will work for my prob.
Any tips for a double wide trailor homes broken drain? Its a plastic tub and the drain was so corroded that when I stepped on it, the rain pipe below the tub broke off. I don't know what to do.
Will Boy you can cut the vapor barrier and access the plumbing from underneath the trailer. Replace the drain assembly with a new one. If you have trouble unscrewing The strainer basket glue something to it with JB Weld like a large flat washer and A nut on top. Wait for it to dry and then turn it out with a wrench.
I purchased a very similar t device from The Home Depot. That device did not work for me. It would not grip on the inside of the drain surface area when I hit it with the hammer. 24 USD down the drain 😓.
Just wish my stubborn grandparents would listen to me when I say this is all we need to remove the tub drain. They're convinced there's a magic screw somewhere holding it in. Gonna get one of these next chance I get and soak in those sweet 'I told you so' points.
I'm cranking on it with big breaker bar and it has barely moved and is still damn tight. It keeps popping out. I swear some fool must have glued the threads.
This video may be seven years old, but it showed me a tool and how to use it to remove my broken bathtub drain today. Thank-you for leaving up this video on RUclips.
Finally, someone who actually shows you how that piece works. I was using the socket wrench wrong! thank you!!
This is a woman watching and you saved me!! My drain was corroded like yours and that removal tool was a lifesaver! I thought I was going to break the damn tub before I tried the tub drain extractor!! Thank you!!!
Thanks so much for this video. I actually BROKE my drain removal tool because my spout was so corroded and stuck. I showed this video to the local plumbing store and they let me borrow this tool and it popped it right out. Great stuff.
Clear and to the point. Exactly what I needed. Thanks!
That's the extractor tool!!! I've been holding off this job a month thinking if the pliers didn't work, people said I might need an "extractor tool" as if it would be a large complicated expensive plumbers device!! It's basically an oversize bolt. Thanks for the stress relieving video!
That's the extractor tool ! It's an oversized bolt! ...well... it's hardened and knurled and fits into the drain. I'm glad it relieved some stress. Hmm, I need to look into videos that relieve stress... Glad it helped bud!
Thanks for the video, this totally worked! Home Depot did not list the drain removal tool in their online inventory, but I found one there anyway for about $20. I recognized it only because I saw this video first, then was browsing the shelves for some other replacement parts and noticed it tucked away in the corner. Thanks again!
You bet! Thanks for telling me. If you ever get a chance -- try to make a video! It is awesome to help.
Thank you so much for posting this. I needed to replace my grandparents drain and this is what I was looking for. You have no idea. You are a life saver.
Thanks for telling me that. That's really why I did it. So many projects it's been kind of a cussing bad deal. I'm hoping we can show each other how to do stuff. Works for me! There is something you know how to do Stephanie that we don't! Please try to show us. Thanks!
About to work on a corroded tub drain and wondered what to do if the bars snap. Glad to see that tool.
Thanks for the video dude! I work for Chicago Water and Fire Restoration and today is our first tub extraction job, this is HELPFUL!! again thanks!!
I didn't have a heat gun, but I was able to boil a big pot of water and pour it slowly over and it worked! Very helpful video.
I could not find an extractor in town so I used a large screwdriver and tapped the handle in the drain. I’m good to go.
Thank you for the video it got me thinking in the right direction.
You sir are a lifesaver.Thank you for taking the time to show this!!
Just what I was looking for. Straight to the point! Thanks.
You are the MAN! I probably walked past this tool a hundred times in the plumbing section and never knew it existed!
ExVinoVeritas what is it called?
You're a life saver!!! Can't wait to replace my drain now.
Excellent ! A lot of people are going to find this helpful. My issue is the entire (chrome) drain / flange is just spinning, and it won't come out.
Boy I needed this video, old house was here when my Dad was a boy, he was able to buy from the people across the street where he grew up & where my 93 yr old Grandma lives now. Old brass drain with no metal to put the one tool on, so I guess I'll spend 20$ on the drain extraction tool. Underneath brass nut to pipe doesn't want to come loose. This video saved me on the top portion, I think I got it from here, thanks Dave.
Habor freight heat gun
Heat the nut it will expand
Cool water in the pipe will help keep the pipe smaller
When changing oxygen sensor
I put wrench on start car try to turn
When exhaust hotenuff it just gives
I didn't have any of those tools but I managed to use some needle nose pliers and that (luckily) freed it! Thanks for the video!
Yours went so much better than mine. About a dozen different tries hammering woke my neighbor, elbow grease, sweat, profanity and so much more! Thanks man good vid 👌
Same here. Glad no one was home at the time as the cuss words were flying. I ended up having to cut mine out.
Thanks for the video demonstrating the removal of broken spud which helped me to change my drain. It was difficult to turn the drain with the drain key & wrench. So I turned on the hot water for some time which helped me remove the drain with the drain key & wrench. The handyman gave an estimate of $575.
WOW!!! I can't believe I found this fantastic video! Thanks a million! I'm very excited now about removing the drain. Thanks again! I've been telling everyone about this video.
Well it was really frustrating for me too. It's amazing how the little things can get ya. If you know how to do something, chances are somebody else doesn't. Put it on here! I'm rooting for ya!
Thank you, you saved me a great deal of time and kept me from using a bit of inappropriate language.
My dad has that exact socket wrench, which he had for at least 40 years. He bought quite a few newer craftsman socket wrenches over the years, and the old craftsman like the one you have outlasted all of them. Hang on to that wrench, you can't find any made as good as that one anymore.
Thanks! I went out to my local hardware store to buy (needed it right away). Worked like a charm!
thank you for making this video, this will save my life in the rest of my maintenance man career
Kawaiipotatoe
Thanks boss. Appreciate you showing the package as well.
Exactly the same problem with our tub. Now I know which tool to look for, ask for. Thanks!
I got one of those, but it won't fit the sizes of my drain. I can't find a smaller size😢
A good play by play instruction video!
Thank you very much Sir, I found myself in a very similar situation and I was stumped on how to do this myself :) 👍🏾
You're welcome. My pleasure. I'm a machinist -- I recognized it would work. But the real thanks goes to the people who made the tool. Thanks for commenting!
I've removed a hundred tub drains using all types of methods. Any tub drain extraction tool with auto size adjust and grippy nibs on it like this one works best.
Did you ever break any pipes trying to remove it?
And if that don't work, break out the sawzaw with a fine metal blade! Put paper towel in the drain to protect the bottom. Then carefully cut two slits. When you get close to cutting through stop! Use a small common screwdriver and pry the cuts until it pops out. GL
This is what I'll end up doing. This extractor tool is garbage.
Thx mine is frozen
Huge thanks! Buying it off amazon as of now.
Pro tip: Lime-a-way removes all the rust off the tub as well.
Magic eraser good for soup scum calcium buildup
this is AWESOME!!!!!!!!!!!!!!!!!!!!!!!! thank you!!! i have been wondering how to get this out!!!!
Wow that’s exactly what happened to mine. Just naught the tool on eBay. Very nice job thanks for the help.
Thanks for the video. Great help on trying to remove a broken drain
What if the drain has been siliconed in around the ring we live fourth floor of condo and the plumber siliconed the drain in so it couldnt leak when new now its 13 years old and coroaded an i can not budge it and i dont want to break the fibergalss tub thanks
I needed this! Thank you for making the video!
Cheers!!!
Awesome!
I was staring at my drain like how the hell am I going to get this thing out? Then RUclips made my dumb ass smart.
Omg! Thank you. This is precisely what i needed!
Thank you sir, outstanding. I was hoping it would be an easy fix !
Take a hack saw blade cut down the inside of the old drain ,takes a couple of minute's, then with a screwdriver slide it down one side between the drain and it's fitting threads .The drain will split ,bent it and take it out. Your cost for tools 50cents for the blade and doesn't everyone have a screwdriver.
Liking your budget!👍
That's a Dream Scenario for a lightly corroded bathtub drain.....half the time it won't come out so easy when badly corroded. Then the last resort is using a Sawzall with fine tooth blade and carefully, slowly cut until you can remove it with some pliers....Been there; done that.....
thanks for this video. I'm curious how ours is gonna turn out since the drain is badly corroded. I'm afraid it is just gonna break into small pieces and not come off cleanly. been wanting to learn how to do stuff like this and this is probably one place to start. will probably try to record and share it in my channel, whether it is successful or not. thanks again. new subscriber here.
Thanks. That's just what I needed to know.
I know this video is from 6 years ago. But thanks a lot man.
Great video. Really glad you passed that on
Can you do the same thing on a plastic (Fiberglass?) tub ??
Perfect, just what I needed to know!
This saved me HUNDRED$ because we live in a very rural area. I could just HUG you!
Hammer and a chisel is all you need.
Wow! Thank you! Here is how to hug me -- there is something you know how to do. You can help. See if you can film it and post it. All these comments. Helping people is pretty addictive. Thanks for commenting!
How can I replace one if it's broke all the way around at the top
Rare to see such excellent lighting
Right on. My predicament with two drains that just collapsed when I tried to remove them. I knew that there was no bloody way the removal tool would work. These drains are way too brittle to withstand the pressure needed to turn them. Well, back to Home Depot to hopefully find that second remover.
Did you use a saw to cut the drain out? That's what I saw a plumber do!
wow thank you!! i am gonna try! what is the name of tool you are using?
Tub drain extractor
and for a 1.25 in copper drain?
Is there any way to repair the corroded part of the bathtub drain without replacing it with a new one? Is there any coating solution to stop the corrosion?
The tub extractor didn't work. Any other suggestions?
I open and when I try to connect what happened is the one under the tub it loose and fell under now how I will connect can you give me any tips thank you
Excellent video
Keep up the great work
my extractor is stuck in the drain, what should i do
God bless you. Now I know what to do
Awesome! May the force be with you.
Did you run hot water or use a hair dryer to heat up and loosen the putty before removing?
What should I do if I can't find a drain to fit my bathtub?
Can I use the wrench if only one of the tees is missing?
Does this work on any drain?
Thanks, my drain corroded from using iron removing cleaners because of my hard water.
Tried the drain extractor tool. Doesn't work on a drain that's been in the tub for 50+ years. The tool doesn't bite like an easy out. Hacksaw, dremel cut-off wheel, hammer and chisel did the trick, taking out quarter section at a time. Old master plumber told me that's way he's always done it.
ps429 I’m trying with traditional smaller tool just broke off the cross piece was about to go buy tool shown here but I’m dealing with an 80 year old tub so should just jump to your method 👍
@@ronhendon6381 You could try the extractor shown here first if you have a hardware store with an easy return policy (Home Depot, Menards, $20) and simply tell them the tool doesn't work or fit. That's what I did. Just go slow with cutting out pieces. You don't want to cut too deep and damage the pipe threads. I also sprayed some Blaster Penetrant oil to help loosen up some of the old putty.
Good luck.
Great job. However, I can't find an extractor as you have. Homedepot/Lowes all out of stock.
That "tool" did not work in my case. The waste was just smaller then 1 1/2" so couldn't hammer the damn thing into the waste to get a grip. Not sure what to do now ....
Should I turn the socket wrench clockwise or counterclockwise to remove the spud? Thank you for making this video!
Binh Minh Pham , you can see on the video that he is going counter-clockwise. in the US we say "righty tighty, lefty loosey", meaning the direction you spin. Hope that helps.
I like that. I always wonder which way to unscrew something, now I know. I had followed the manufacturer instruction listed on the back of the package, turning the 1/2" racket wrench counterclockwise, but it didn't work. I was confused when he turned both directions at the 2nd attempt. Neither way works for me. As a last resort, I carefully cut through the corroded, stubborn spud with a hacksaw blade and it worked without any damage to the PVC drain shoe and the tub. (a hacksaw blade + heat+ lubricant + screwdriver + patient)
My question is why did my plughole get all corroded like that? It was fine until recently.
This tool is better than the cheaper one. But even this superior tool need lots of muscle power if your drain is old. Also 1/2 socket wrench is not used at home. So you will need to buy a new one . If you are old and the drain is old then call your plumber.
Thank you for the video, I have been trying to get a plumber to come out but it must be too cheap of a job that they are not coming for so little!!! Now I was afraid that the piece underneath the tub may drop down bellow the house after removing the piece! Is that underneath piece hooked up to the tub that he actually will not fall off? Thank you very much that may only be a simple fix. 👏
Whats it called
Lol mines broken the opposite way. The threaded end snapped off the top metal lip. So hoping it'll just be a putty knife for the upper part and then use the drain key tool to twist out the threaded part from the bottom. It's kinda floating around under my tub so hopefully won't be to hard to get it to thread in the new one lol
I have a leak possibly at the drain. Will replacing it fix the problem? Plumber believes pulling out the tub is the only way to be certain. Also, won't the PVC tube move or drop once the the drain is removed? How do you keep it from moving?
I've seen a plumber use a socket wrench about 18in long to get out the drain. I have also seen a plumber take a saw and cut the damn thing out. Sometimes it's so corroded, one cut and the whole thing basically falls apart!
How do you remove the tub drain extracter from the old drain?
How do I measure the circumference of my drain? There is so much corrosion. Around the inside of the rim appears to be 1.75 in". With all if the corrosion however is 1.5" . 35 yr. Old drain. Will this tool be big enough to remove my drain that looks like its been in the ocean for many decades. Like your vid. I hope this tool will work for my prob.
Thank you. Very helpful video.
Any tips for a double wide trailor homes broken drain? Its a plastic tub and the drain was so corroded that when I stepped on it, the rain pipe below the tub broke off. I don't know what to do.
Will Boy you can cut the vapor barrier and access the plumbing from underneath the trailer. Replace the drain assembly with a new one. If you have trouble unscrewing The strainer basket glue something to it with JB Weld like a large flat washer and A nut on top. Wait for it to dry and then turn it out with a wrench.
Thanks, I knew there had to be a tool for this.
thank you, sir!
I purchased a very similar t
device from The Home Depot. That device did not work for me. It would not grip on the inside of the drain surface area when I hit it with the hammer. 24 USD down the drain 😓.
Just wish my stubborn grandparents would listen to me when I say this is all we need to remove the tub drain. They're convinced there's a magic screw somewhere holding it in. Gonna get one of these next chance I get and soak in those sweet 'I told you so' points.
sorry did not work for me, the tool dont grab enough
Great Video! Thank you!
Thanks! I use a lot of how to videos. What a time saver. Glad I could give back.
Same problem today I can’t get it out either 😩
Thank you very much!
thanks a lot for this video sir 👍
thanks, i was wondering about this.
I spent ages with this. Does not work on badly corroded drains. Loses the grip.
Great, but sometimes the drain is awfully stuck in.
I'm cranking on it with big breaker bar and it has barely moved and is still damn tight. It keeps popping out. I swear some fool must have glued the threads.
Thanks so much great idea
Thankyou Sir, good job.
This helped a bunch!
I'm glad! Hope it goes easy for you!
is that a box store tool? expensive or fairly inexpensive?
I got mine on Amazon for $20. Superior Tool 05255.
Thanks for the tip....