I bought this model used and for a season it worked very well and then we hit our hot Florida summer. He uses this model to do home inspections. We live in Florida and he has come home and found that the pictures he has taken come out black instead of what he was shooting. Why is this happening? Is there a solution? Also, where is your repair shop because we definitely need his mouse pad replaced!
Hi Patti! We are located in Smyrna, Delaware but we work with customers from all over the world. We would be happy to answer your questions and work with you to resolve the problems you are describing with your CF-20. Please give us a call at 877-202-7788 or fill out our repair and service form here: www.bobjohnson.com/repairs-service/ to get started.
You should do a issue video on the CF-33. Fist one screen lasted a year failed was covered under warranty, said they have never seen that happen before. 9 weeks later finally got my replacement brand new replacement at that mine was unable to be repaired now 10 months later screen has failed again on the brand new replacement.
For cf20. Do you know if there is any setup to have a battery balancing option? To use power simultaneously from both batteries, to avoid consuming totally just one battery and the other not. I observed that the battery wear for the "keyboard" component of the cf20 is wearing faster than the other one. Probably because is kept more time with SOC lower than 20%.
Just picked up my Mark 1, everything works well EXCEPT that the touchpad and USB ports on the base keep disconnecting from the tablet. If I remove the tablet from the base, and re-install, it works well for a little while. Have you seen this issue happen?
@Robbbbooo The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
Hey bob, quick question, is possible put my Windows 10 operating system from my laptop to run on this Panasonic? Just replacing the ssd. I got some heavy software which has about 350gb
The problem with that is you don't have the Panasonic drivers currently on that drive if it's not a CF-20. Without the drivers, you could loose some functionality on the Toughbook. We would recommend a fresh Windows 10 load with all the drivers. Thanks for watching.
I had a weird issue occur with my CF-20 today. The touchpad stopped working and an external mouse only works from the left-side USB port on the monitor. The base is not the issue. I have another CF-20 and swapping bases didn't help - the problem stuck with the monitor portion. Also odd is that external HDDs work just fine from the base's USB ports. It's just the mouse that won't work.
Hi Mike, I'm sorry you're experiencing that. You can always reach out to our techs to receive some tech support or you can send it in for our techs to look at. Just fill out one of our forms to get started. Tech support: www.bobjohnson.com/tech-support-form/ Repairs and service: www.bobjohnson.com/repairs-service/
the battery issue seems to be more and more common with L-ion batteries. No matter whether HP, Panasonic, Dell, ect. It seems ALL of them are starting to have severe selling issues.
Hi MyJeepWaves, you're right. Although they are great for a shorter charge time at first, "capacity fade" is a pretty common occurrence with Lithium Ion batteries. Hopefully the science of battery making can improve to solve this issue one day soon!
My CF-31 is over 10 years old and shows no noticably battery degradation at all. I think the smaller the batteries are the sooner they have to be replaced.
i have several cf20s, several of them the screen is stuck to the docking station and the release button doesnt allow the screen to disengage, any idea on how to fix or release screen?
Anthony Herold The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
Hey Bob, love the video! Quick question - I just purchased a CF-20 and while the touchpad works, I am not able to use two-finger scroll and only have the option for mouse sensitivity in windows touchpad settings. Any advice for fixes to this issue? I've tried driver updates from Panasonic as well with no luck.
Bob, great video. Question about the Touchpad failing. I just bought a refurbished CF-20 with Win 10 Pro OS from Amazon and the Touchpad is not working. I updated the OS, and it worked for one minute until a reboot during an update install. I removed the current mouse device from Device Manager, downloaded and installed the CF-20 Touchpad Driver from the Panasonic site and it still doesn't work. I let Windows search for a proper driver also and it keeps choosing "HID-compliant mouse". When I go to Settings, there is no Touchpad listed on the left. Only Mouse. Any suggestions?
Hi Vamackies, sometimes the connection to base can get interrupted if it is not secured well in the base. You could try undocking it from the base and docking it again. You could also try shutting the computer off and cleaning the contacts between the tablet and the base. If that doesn't work, you can always fill out our repairs and service form to send in your CF-20 and have us look at it. www.bobjohnson.com/repairs-service/
Oh no! That's not good. We would need more details to figure out what's going on. If you're interested in having us look at it for you, you can fill out our repair form here www.bobjohnson.com/repairs-service/ or give us a call at 877-202-7788.
Sorry, there is no way to reset the BIOS password. You can read more about it here www.bobjohnson.com/blog/how-to-reset-the-bios-password/ Thanks for watching.
Ran into an intermittent issue with the touchpad not working. Everything else on the detachable keyboard seems fine. Any ideas? This is a CF-20A5023VM and the base is a CF-VEK201LMP. Appreciate any assistance you can provide this one is slated for a client but I won't ship until everything is fully functional.
@TougherTechnology The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
I have two Panasonic CF52s and from day one I received them I could not run the laptop from a brand new battery. I would have to plug in a brand new charger to get them to work. I want to be able to use them without the charger on the road in my car. Any help would be helpful.
We would need more info. So I suggest that you send an email to our tech support team tech_support@bobjohnson.com and give the the full model number of the laptops as well as a detailed explanation of the issue with your batteries.
Sadly no. The RAM on the CF-20 is soldered on to the system board so it's not upgradable. If you wanted one with 16GB of RAM you would have to get one that already has it installed. Hopefully this helps, thanks for watching.
As a mechanic, you would want a fully rugged laptop. The Panasonic CF-31, CF-33, or FZ-40 would be the best options for you. There is also the Durabook Z14i. If you need some help shopping for one, feel free to call us at 302-659-2727.
Out of the options you listed, the mk5 is the latest and greatest. We currently have one with all the upgrade options available for it for $999.99. Check it out here: www.bobjohnson.com/toughbook-cf-31-mk5-extreme/ And here is our entire catalog of CF-31s: www.bobjohnson.com/toughbook-cf-31/ Thanks for watching!
Would love to see a super video on General Dynamics GD8200, and a stand alone video on media bay accessories. Love watching Bob Johnson tech videos!
My touch screen works but the stylus doesn’t work. I have the CF20A , mk1. Any ideas?
So you are able to use your finger and the touch works but you use the stylus and it does not?
I bought this model used and for a season it worked very well and then we hit our hot Florida summer. He uses this model to do home inspections. We live in Florida and he has come home and found that the pictures he has taken come out black instead of what he was shooting. Why is this happening? Is there a solution? Also, where is your repair shop because we definitely need his mouse pad replaced!
Hi Patti! We are located in Smyrna, Delaware but we work with customers from all over the world. We would be happy to answer your questions and work with you to resolve the problems you are describing with your CF-20. Please give us a call at 877-202-7788 or fill out our repair and service form here: www.bobjohnson.com/repairs-service/ to get started.
You should do a issue video on the CF-33. Fist one screen lasted a year failed was covered under warranty, said they have never seen that happen before. 9 weeks later finally got my replacement brand new replacement at that mine was unable to be repaired now 10 months later screen has failed again on the brand new replacement.
For cf20.
Do you know if there is any setup to have a battery balancing option?
To use power simultaneously from both batteries, to avoid consuming totally just one battery
and the other not.
I observed that the battery wear for the "keyboard" component of the cf20 is wearing
faster than the other one.
Probably because is kept more time with SOC lower than 20%.
Just picked up my Mark 1, everything works well EXCEPT that the touchpad and USB ports on the base keep disconnecting from the tablet. If I remove the tablet from the base, and re-install, it works well for a little while. Have you seen this issue happen?
@Robbbbooo The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
Hey bob, quick question, is possible put my Windows 10 operating system from my laptop to run on this Panasonic? Just replacing the ssd. I got some heavy software which has about 350gb
The problem with that is you don't have the Panasonic drivers currently on that drive if it's not a CF-20. Without the drivers, you could loose some functionality on the Toughbook. We would recommend a fresh Windows 10 load with all the drivers. Thanks for watching.
awesome
Thank you
I had a weird issue occur with my CF-20 today. The touchpad stopped working and an external mouse only works from the left-side USB port on the monitor. The base is not the issue. I have another CF-20 and swapping bases didn't help - the problem stuck with the monitor portion. Also odd is that external HDDs work just fine from the base's USB ports. It's just the mouse that won't work.
Hi Mike, I'm sorry you're experiencing that. You can always reach out to our techs to receive some tech support or you can send it in for our techs to look at. Just fill out one of our forms to get started.
Tech support: www.bobjohnson.com/tech-support-form/
Repairs and service: www.bobjohnson.com/repairs-service/
Let me know if you resolved this, I am currently having the exact same issue..
the battery issue seems to be more and more common with L-ion batteries. No matter whether HP, Panasonic, Dell, ect. It seems ALL of them are starting to have severe selling issues.
Hi MyJeepWaves, you're right. Although they are great for a shorter charge time at first, "capacity fade" is a pretty common occurrence with Lithium Ion batteries. Hopefully the science of battery making can improve to solve this issue one day soon!
My CF-31 is over 10 years old and shows no noticably battery degradation at all. I think the smaller the batteries are the sooner they have to be replaced.
i have several cf20s, several of them the screen is stuck to the docking station and the release button doesnt allow the screen to disengage, any idea on how to fix or release screen?
Anthony Herold The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
Hey Bob, love the video! Quick question - I just purchased a CF-20 and while the touchpad works, I am not able to use two-finger scroll and only have the option for mouse sensitivity in windows touchpad settings. Any advice for fixes to this issue? I've tried driver updates from Panasonic as well with no luck.
CF-20 touchpad doesn't have 2-finger scroll capabilities; only 1-finger scroll (right corner)
That is correct Greg, Thanks for your input. Thanks for watching.
hello, where is the magnet to activate the non-Detecter battery. THANK YOU
Hi! We have a short coming out about this tomorrow! Keep an eye out! Thanks for watching!
Here's the link:ruclips.net/video/Vgb90MsvoAM/видео.html
Bob, great video. Question about the Touchpad failing. I just bought a refurbished CF-20 with Win 10 Pro OS from Amazon and the Touchpad is not working. I updated the OS, and it worked for one minute until a reboot during an update install. I removed the current mouse device from Device Manager, downloaded and installed the CF-20 Touchpad Driver from the Panasonic site and it still doesn't work. I let Windows search for a proper driver also and it keeps choosing "HID-compliant mouse". When I go to Settings, there is no Touchpad listed on the left. Only Mouse. Any suggestions?
Hi Vamackies, sometimes the connection to base can get interrupted if it is not secured well in the base. You could try undocking it from the base and docking it again. You could also try shutting the computer off and cleaning the contacts between the tablet and the base. If that doesn't work, you can always fill out our repairs and service form to send in your CF-20 and have us look at it. www.bobjohnson.com/repairs-service/
I have the same issue on a MK1 and am looking for a fix if anyone has solved this.
Our c-20 keyboard stops working right in the middle of emergency rescue calls. Please help because our department doesn't fix it. Thanks
Oh no! That's not good. We would need more details to figure out what's going on. If you're interested in having us look at it for you, you can fill out our repair form here www.bobjohnson.com/repairs-service/ or give us a call at 877-202-7788.
The problem i have password bios in it and i cant remove it
Sorry, there is no way to reset the BIOS password. You can read more about it here www.bobjohnson.com/blog/how-to-reset-the-bios-password/ Thanks for watching.
Ran into an intermittent issue with the touchpad not working. Everything else on the detachable keyboard seems fine. Any ideas? This is a CF-20A5023VM and the base is a CF-VEK201LMP. Appreciate any assistance you can provide this one is slated for a client but I won't ship until everything is fully functional.
@TougherTechnology The best way to answer this question is to simply fill out our Tech support form. Our in-house technicians will answer with the links and info you will need. Here is the link: www.bobjohnson.com/tech-support-form/ Thanks for Watching.
@Bobjohnson Thank you I submitted a ticket and appreciate the assistance.
Great Video! What is the model or item number of the extra battery?
The second battery is the same battery as the one in the tablet portion of the laptop.
@@Bobjohnson Thanks Please post the model number of battery.
I have two Panasonic CF52s and from day one I received them I could not run the laptop from a brand new battery. I would have to plug in a brand new charger to get them to work. I want to be able to use them without the charger on the road in my car. Any help would be helpful.
We would need more info. So I suggest that you send an email to our tech support team tech_support@bobjohnson.com and give the the full model number of the laptops as well as a detailed explanation of the issue with your batteries.
@@Bobjohnson Thanks
I have 8 gb of ram can i upgrade to 16 or higher?
Sadly no. The RAM on the CF-20 is soldered on to the system board so it's not upgradable. If you wanted one with 16GB of RAM you would have to get one that already has it installed. Hopefully this helps, thanks for watching.
hello,i have one issue that if u want to upgrade ram,how to upgrade
The RAM is not upgradeable in the CF-20.
ive seen panasonic toughpad cf 20 but ive seen book series Video
Hello Master whats the best laptop for diesel mechanic
As a mechanic, you would want a fully rugged laptop. The Panasonic CF-31, CF-33, or FZ-40 would be the best options for you. There is also the Durabook Z14i. If you need some help shopping for one, feel free to call us at 302-659-2727.
@Bobjohnson thank you much professor for responding CF31 mk3 mk4 mk5 wich one?
Out of the options you listed, the mk5 is the latest and greatest. We currently have one with all the upgrade options available for it for $999.99. Check it out here: www.bobjohnson.com/toughbook-cf-31-mk5-extreme/
And here is our entire catalog of CF-31s: www.bobjohnson.com/toughbook-cf-31/
Thanks for watching!
I'll stick with the CF-19
The CF-19 is definitely a workhorse. I also like how you can easily upgrade it with additional features.