Flashing Tasmota to MagicHome RGB Controllers
HTML-код
- Опубликовано: 27 авг 2024
- This will show you how to install and configure Tasmota to MagicHome RGB controllers. Also covers setting up the IR remote.
Rule1 on IrReceived#Data=0x00FF906F do dimmer + endon on IrReceived#Data=0x00FFB847 do dimmer - endon on IrReceived#Data=0x00FFF807 do power OFF endon on IrReceived#Data=0x00FFB04F do power ON endon on IrReceived#Data=0x00FF9867 do color2 1 endon on IrReceived#Data=0x00FFD827 do color2 2 endon on IrReceived#Data=0x00FF8877 do color2 3 endon on IrReceived#Data=0x00FFA857 do color2 #000000FF endon on IrReceived#Data=0x00FFE817 do color2 #CC6600 endon on IrReceived#Data=0x00FF48B7 do color2 5 endon
Rule2 on IrReceived#Data=0x00FF6897 do color2 #0066ff endon on IrReceived#Data=0x00FF02FD do color2 4 endon on IrReceived#Data=0x00FF32CD do color2 8 endon on IrReceived#Data=0x00FF20DF do color2 9 endon on IrReceived#Data=0x00FF50AF do color2 #ffcc00 endon on IrReceived#Data=0x00FF7887 do color2 #0066cc endon on IrReceived#Data=0x00FF708F do color2 #cc00ff endon on IrReceived#Data=0x00FF38C7 do color2 #ffff00 endon on IrReceived#Data=0x00FF28D7 do color2 10 endon
Rule3 on IrReceived#Data=0x00FFF00F do color2 11 endon on IrReceived#Data=0x00FFB24D do scheme 1 endon on IrReceived#Data=0x00FF00FF do scheme 2 endon on IrReceived#Data=0x00FF58A7 do scheme 3 endon on IrReceived#Data=0x00FF30CF do scheme 4 endon
worked a treat. Had a few self made problems when i had rx and tx the wrong way round. Brilliant!
Great.
Any particular reason you didnt just select the "Magic Home" module type in the tasmota configuration?
My, There are only 4 contacts on my circuit board. Unfortunately, I couldn't find any instructions anywhere. The contacts (VPP, SWS, V33 and GND) although the board has the same designations printed on it (94V-0; E331298; ZXH-2) Can you provide any help?
That's a well explained tutorial. 👍👍👍
Thank you
Does anyone know of a seller still selling the IR version with the ESP8266 device (eg ebay/AliExpress)? I bought two recently and they both had an S9070B chip, no esp. I am trying to do exactly what the video describes.
@NikNak LP when did you purchase it? It seems like all latest model being replaced by the new chip. I m looking for other controllers now
This one worked for me in the end (RGB IR version):
a.aliexpress.com/_mMu0ZGn
Esp8285 chip but Tasmota flashed fine.
I am having the same issue, I already ordered 4 controllers from different sellers from Ebay and AliExpress, and all of them came with chip BL602L instead of ESP8266, which AFAIK cannot be flashed at the moment. I realised these new models have "100w" in the label instead of "144w". I am desperate to get some of them so if anyone knows of a seller that is still selling the ones with ESP8266 please share
@@elbueno22222 the link above worked but I don’t know if they still sell the correct one. Maybe check the recent reviews.
@Nigerian Prince to be honest I don’t remember 96, 100 or 144 featuring anywhere and I don’t see it on the product descriptions. If you have the espresssif logo on the chip then it is almost certainly the esp8266 (which you can flash).
So very helpful, thank you!!!
You're welcome.
Is there a way to do this OTA with a Raspberry Pi and a vtrust-flash network? I've flashed to other devices this way but I can't seem to get this device into the proper mode for the flasher to find it over the air.
Hi, is possible to use remote to control other devices, like smart wifi bulbs? I'm looking for solution to control bulb lights (not LED strips), but would like to connect it to Home Assistant? Or it's working only for LED connected to controller?
Yes it possible. I do it on mine. You just write a rule to send the colour change to any device you want to change. The device must be able to receive these commands. I use Tasmota and shelly which both can do this.
After flashing Tastmota is it still possible to control the LEDs with MagicHome App?
No
Hi, That's awesome! So we can integrate it with Home Assistant right? Which lights did you use?
I just used a standard 5m roll of RGBW lights.
When you are doing the configuration, is the USB still connected to the PC?
At the point when I am using Termite YES. After that NO.
Great video, I followed you I flashed mine and all went well, I can access Tasmota, I configured it like you did, however when I press Toggle the LED doesn't light up. Could I have fried anything while flashing?
No flashing cannot damage anything.
@@qualar , I got exactly the same Issue. Wonder which tasmota version was exactly used in presented video.
Cristian, in my case it was the polarisation, i had to reattach the power cables, switching them as well. Now IT WORKS LIKE A CHARM :)
@@piotrblaszczyk6221 Do you mean you changed plus with minus on the controller?
@@CristianImbir, I just put the ac plug the other way, what eventually reversed the flow. It works flawlessly ever since.
hello, great tutorial ! thanks for that !
I juste have one question, how did you doo for the voice controll with alexa ?
Just make sure you have Hue Emulation set in Tasmota and a Friendly Name. Then just add it in the Alexa App on your phone.
@@qualar does work to google home ?
@@LucasDellaSantina It should do. Check the Tasmota docs to confirm
@@qualar Thank you very much, currently I managed to flash esp 6685 and I am setting up home assistant with tasmota
Can the rules be compiled into the firmware? Instead of inputting through the console, so that you can avoid resetting the lost rules.
Tasmota rules are auto saved to flash
I flashed my Controller like you but I can´t get the color white. Do you have a solution?
And do you know how to set this device up in to ioBroker?
Did you purchase the RGB or RGBW version?
The RGB but I figured it out. I switched the Gpio Pins in the Tasmota Software
@@lukas_prints3d409 I have the same problem, what was the gpio pin that you have changed?
@@donteventry3054 5 = PWM 1(37)
12 = PWM 3(39)
13 = PWM 2(38)
@@lukas_prints3d409 thanks but that was not the case, I had to set 'GPIO15 =switch' to get the white color to work
Hi, does the controller work with a greensun stripe?
If the strip takes dc voltage and rgb connections.
@@qualar how I can look this?
@@khatab_ha479 Do you already own the strip?
@@qualar yes
OK, just look at the end if the strip and you should see either 4 or 5 connections. +, R, G, B, W. On some the W will be missing and on some the + will be a - or GND.
I have this error: md5 of file does not match data in flash!
Can you make about siri
Sorry I do not use Apple devices.
Doesn´t Work with BL602
www.elektroda.com/rtvforum/topic3889041.html