Never ever had to remove the whole pickup assembly, the pickup rollers yes, and that is easy ... fuser re-build / replacement, scanner flex cable, transfer belt, but never the whole feed assembly ... what makes that necessary ?? true the ones I've repaired are all below 200K. Seems like an awful lot of work ....... but never had to do that !! ~~~~ Wow ! - fascinating none-the-less !! Good video !!
Hi Melanie, thanks for contacting! We are delighted to hear that it is working! If you need any help in the future, you can always get back to us. Thank you for being a valuable HP customer. Have a wonderful day! Cheers! Binu - Social Media Tech Support
Hi there, thanks for contacting! I understand that you are receiving 'Load paper' error on your printer. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3BVKmzo Binu - Social Media Tech Support
i have a repetitive noises with my printer (m452). i thought it was the fuser problem. using service manual i took it away and greased the internal bit deep inside the fuser. boy it took hours but i did it. now the noise didn't go away so i am puzzled about what to do.
+SensitiveMeatball Remove the toner and close the door.The machine will do a pre start cycle.Should the noise be gone the toner cartridge might not turn easily.Should the noise still be heard even without the toner then the fault can be on the drive gears and even on the fuser unit.Hope this helps. If without the toner everything works smoothly, it means you will have to replace the toner
3 years after release of video, this reset option still works great. Thank you. Great background music as well.
Never ever had to remove the whole pickup assembly, the pickup rollers yes, and that is easy ... fuser re-build / replacement, scanner flex cable, transfer belt, but never the whole feed assembly ... what makes that necessary ?? true the ones I've repaired are all below 200K. Seems like an awful lot of work ....... but never had to do that !! ~~~~ Wow ! - fascinating none-the-less !! Good video !!
+Michael Moore Glad to know that the video was useful to you!!
Thank you so much!! Mine has been jammed for months you really helped me :)
Hi Melanie, thanks for contacting!
We are delighted to hear that it is working!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
just got my 2nd M454DN brand new and both have been broken, "load paper" error(s) and "tray lifing". HP needs to figure this out, junk
Hi there, thanks for contacting!
I understand that you are receiving 'Load paper' error on your printer.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3BVKmzo
Binu - Social Media Tech Support
i have a repetitive noises with my printer (m452). i thought it was the fuser problem. using service manual i took it away and greased the internal bit deep inside the fuser. boy it took hours but i did it. now the noise didn't go away so i am puzzled about what to do.
+SensitiveMeatball Remove the toner and close the door.The machine will do a pre start cycle.Should the noise be gone the toner cartridge might not turn easily.Should the noise still be heard even without the toner then the fault can be on the drive gears and even on the fuser unit.Hope this helps. If without the toner everything works smoothly, it means you will have to replace the toner