Something i noticed that i don't think you showed in the video but did you end up running additional led strips through the middle of the piece? Because i could see on the lighting effects that the centre was lighting up aswell. Looked absolutely incredible
I think the LEDs are pointing from the outside in, and behind the plexiglass so you're seeing the light shine all the way through the back of the structure
@@FLXtv I finally made mine yesterday: I finally made mine yesterday: instagram.com/p/CL1MREPhB9N/?igshid=1oqy97b4ciqeq Still some small adjustments. I hade to use 3 x 5m lines. Right now they are connected in parallel. (So I didn’t have to power inject. I am curious how you ran the inject cables ? I hade a big issue cutting plexiglass . I used a thinner version that cracked with jigsaw (even with special blade) I couldn’t fit the full 96’x36’ (that you used) in car. So had to use half sheet, but it was thinner. Solved cutting by using Dremmel. Worked well but nut as exact as jigsaw. The cutting of hex panels was very tedious. I tip for everyone is to use a new break off cutter. Super fun project that looks fantastic THANK YOU for posting this. #SwedishNumber1Fan
Dude, I am straight up FLOORED!! I came here from Sam Woodhall's YT thumbnail video. I'm staying bc I freaking LOVE the creativity here. I consider myself relatively crafty with this kind of thing, but I'm just crazy impressed by how amazing this looks. Very well done!
Epic idea and great execution. Only suggestion for improvement would be 1) use frosted plexiglass 2) stand plexiglass further off wall, maybe 2". 2) run LEDs on wall facing out towards room. 3)The distance between plexiglass board combined with it being frosted will provide a much more even, diffused look. But great project nonetheless!
@@DuncanBuilds so im planning on building this, would this acrylic sheet work? www.homedepot.com/p/OPTIX-24-in-x-36-in-x-0-100-in-Frosted-Acrylic-Sheet-99999984/314963151
@@ethanhaley5439 yessir shoukd work great. Remember, the second key to this is getting it spaced off the wall 2" or more and running the less on the wall rather then the acrylic. Also might want to consider using some of that acrylic to make a frame around the whole thing so let's aren't visible from the side.
@@DuncanBuilds so would it work if i use the frosted stuff and also put the leds on the back? Because there is a pretty high chance we are moving sometime soon, so I would like to be able to move it somewhat easily.
Awesome video! This has inspired me to make a build like this! I’ve brought all the materials! Just stuck on the wiring and programming part! Would appreciate if you made a video explaining the wiring and lighting effects you have 🙈
@@FLXtv Thankyou for the reply, any details on the release date? a few questions if you dont mind answering them 1) Im planning on having 2 sets of 5m LED strips, in terms of setting them up, will they both be connected to the ESP8266 Node MCU and that will be wired to a powersource? 2) how did you programme the lighting effects? were they easy to do Cheers
Dude. This is the best looking wall LED setup I have ever seen and I am confident I won;t see better. Well done dude. Will take a long time, but damn this looks good. Which software for the lighting do you use or does it come with the LED strip?
excelente , no se si notaron pero en la parte del centro también coloco una linea de luces led las cuales no muestra en el video pero se nota cuando esta haciendo las transiciones de movimientos, para que lo tengan en cuanta al hacer el proyecto porque esta genial para mi cuarto. Gracias . Excellent, I do not know if you noticed but in the center part I also put a line of led lights which does not show in the video but it shows when you are doing the transitions of movements, so that they take it into account when doing the project because it is great for my room. Thank you .
This was amazing!!!! I've been subbed for a few months now, but I don't understand why I'm getting this notification so late (4 days late?). Anyways, dope set-up, I'm about to do something similar myself, wish me luck!
@@FLXtv Could be, I actually remember RUclips crashing for everyone for a day and a half last week as well. Do you have a discord or Instagram for your channel?
Great job! It looks really good. My only suggestion is to use a spacer template made from something like some scrap wood. This ensures that the spaces between the hexagons are uniform.
Dude! You have everything I have lol! But that Hexagon was fing amazing actually, hope I can show you mine soon Did you ever think of having a few hexagons as mirrors?
Great Project, I'm glad youtube recommend this. I don't get how you did the leds tho. At 5:06 you've two layers of led strips, at 6:25 it looks like every "honeycomb" has his own few leds. DId you add more leds than it showed?
Hello, what motion sensor can I use with 30 meters of ws2812b LED strip connected to an esp32 controller and powered by a 5V 60A 300W power supply? and how to assemble all this, there will be 6 strips of 5 meters each with a number of diodes of 60 per meter, how can I assemble all this and what motion sensor should I use so that it turns on only when someone moves, and then after a while it turns itself off and so that it worked even during the day,
Hello, Very nice setup! can you make a video about the programming and circuit etc.. I would be really interesting in watching it. Cheers, again great video
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
Holy 😳
yo i watch your twitch and youtube!
@@FLXtv boy get out of here with that COVID
@@FLXtv Can you help me?
@@FLXtv pls help meee
@@FLXtv Ok thx❤
Something i noticed that i don't think you showed in the video but did you end up running additional led strips through the middle of the piece? Because i could see on the lighting effects that the centre was lighting up aswell. Looked absolutely incredible
I noticed that too.
@@Gambiarte i noticed too
I think the LEDs are pointing from the outside in, and behind the plexiglass so you're seeing the light shine all the way through the back of the structure
@@JackSkates that's what I initially thought but if you look from 06:30 you can see individual lighting around some of the middle hexagons
@@JackSkates you can see though the tiles and it shows another strip
:O WOW this is more than incredible. The heaven for gamers and RGB fans!
Better than nano leaf panels
Heb ded then omfg
Bro your lightening is really great, a lot of natural light, good job
He is Gorgeous, he likes to create and share his knowledge and passion with us, sounds like an angel ♥
thats gay af
If only I had that much free time.. Great job
not gonna lie I love it. Goals right there
Love that hexagon lighting, incredible
liked everything beside to mix the wood with the white ones ;)
People asking about the middle, watch closely he wraps the LED strip around both the outside & inside of the spacer blocks
Absolute legend!! Thank you so much for this. Just gave me a heap of ideas for my setup. Keep this stuff coming!
So what did u end up doing.. pics
Those are looking better than the nanoleaf in my opinion...😍
This is fucking awesome. Plus, it is so easy built. Incredible
Clicked for light panels..stayed for master chief 😎
Love those! Nice work.
Dude, this is soooo legit! Great work!
RGB and the light from my screens are my only light source
Would love to see a video on the LED panel!
cool DIY RGB video glad youtube passing me small gaming channels to this epic DIY video!
I would love to see the led panel in how you made it work. ¡You rock! One of the best I have seen!
Make more videos! Love your attitude and Renaissance skill set. Subscribed, liked and this comment should feed the algorithm.
Hey, very cool project! How did you get the LEDs to the hexagons in the middle? And how did you wire them?
@@FLXtv oh cool thanks man!
@@FLXtv Did you have to inject more 5v power?
Looks like the total length is longer then 16”?
16’
@@FLXtv I finally made mine yesterday:
I finally made mine yesterday:
instagram.com/p/CL1MREPhB9N/?igshid=1oqy97b4ciqeq
Still some small adjustments.
I hade to use 3 x 5m lines. Right now they are connected in parallel. (So I didn’t have to power inject.
I am curious how you ran the inject cables ?
I hade a big issue cutting plexiglass . I used a thinner version that cracked with jigsaw (even with special blade)
I couldn’t fit the full 96’x36’ (that you used) in car. So had to use half sheet, but it was thinner.
Solved cutting by using Dremmel. Worked well but nut as exact as jigsaw.
The cutting of hex panels was very tedious.
I tip for everyone is to use a new break off cutter.
Super fun project that looks fantastic
THANK YOU for posting this.
#SwedishNumber1Fan
Acoustic Foams are used for Echo & Acoustic Curtains are used for Soundproofing SoundProof-Curtains.me
I wish i could make someone built like this for my gaming setup someday😁
Crazy and rlly nice...
Need this for my gameplace
Excellent! Hard work with a great result!
Dude, I am straight up FLOORED!! I came here from Sam Woodhall's YT thumbnail video. I'm staying bc I freaking LOVE the creativity here. I consider myself relatively crafty with this kind of thing, but I'm just crazy impressed by how amazing this looks. Very well done!
Epic idea and great execution. Only suggestion for improvement would be 1) use frosted plexiglass 2) stand plexiglass further off wall, maybe 2". 2) run LEDs on wall facing out towards room. 3)The distance between plexiglass board combined with it being frosted will provide a much more even, diffused look. But great project nonetheless!
wouldnt frosted plexiglass make the leds not shine through as well?
@@ethanhaley5439 no it merely diffuses the light and hides the individual leds
@@DuncanBuilds so im planning on building this, would this acrylic sheet work?
www.homedepot.com/p/OPTIX-24-in-x-36-in-x-0-100-in-Frosted-Acrylic-Sheet-99999984/314963151
@@ethanhaley5439 yessir shoukd work great. Remember, the second key to this is getting it spaced off the wall 2" or more and running the less on the wall rather then the acrylic. Also might want to consider using some of that acrylic to make a frame around the whole thing so let's aren't visible from the side.
@@DuncanBuilds so would it work if i use the frosted stuff and also put the leds on the back? Because there is a pretty high chance we are moving sometime soon, so I would like to be able to move it somewhat easily.
dude this is sick
Nice job done :3 im building my set up
Tks you for you idea :3
Wow! Great job man! You're giving me a great idea!!! Keep em coming.
Awesome video! This has inspired me to make a build like this! I’ve brought all the materials! Just stuck on the wiring and programming part! Would appreciate if you made a video explaining the wiring and lighting effects you have 🙈
@@FLXtv Thankyou for the reply, any details on the release date? a few questions if you dont mind answering them
1) Im planning on having 2 sets of 5m LED strips, in terms of setting them up, will they both be connected to the ESP8266 Node MCU and that will be wired to a powersource?
2) how did you programme the lighting effects? were they easy to do
Cheers
@@zeeshanaslam5056 the video is out, im planning to do one too 🙂
Acoustic Foams are used for Echo & Acoustic Curtains are used for Soundproofing SoundProof-Curtains.me
bro what a look?
That was a very nice diy tutorial ! Well done mate
Brasil aqui, não entendi nada do vídeo, mas tá muito top 👌🏽👌🏽👌🏽
Não foi tão difícil acho que ele só não colocou código da controladora pra controlar por som e tals
This looks insane!! you need to be more famous, so keep grinding my guy!!!
That was incredible..., good job
You should make and sell those..I’ll definitely buy it!
Looks great, excellent job 👍
Brooooooo.. you're like harry potter!!
I don't know what to say just wow
amazing work bro
keep it up
Impressive how you did this!👍
Damn, this looks amazing. I doubt I could do something like this but really nice nonetheless. When I do my set up I plan to put something similar.
'0' It's amazing!!! I loved! 💚
wow amazing
Woooow magnifique ! 😻❤️
Wowww ,so very beautiful 😍😍
I was going to buy nano leafs but this is definitely better idea
Dude. This is the best looking wall LED setup I have ever seen and I am confident I won;t see better. Well done dude. Will take a long time, but damn this looks good. Which software for the lighting do you use or does it come with the LED strip?
you deserve way more subs...big ups from GREECE good work
The master chief helmet made this whole experience even better
That is sick! Subscribed!
Nice build
the best setup ❤️❤️🥺
excelente , no se si notaron pero en la parte del centro también coloco una linea de luces led las cuales no muestra en el video pero se nota cuando esta haciendo las transiciones de movimientos, para que lo tengan en cuanta al hacer el proyecto porque esta genial para mi cuarto. Gracias .
Excellent, I do not know if you noticed but in the center part I also put a line of led lights which does not show in the video but it shows when you are doing the transitions of movements, so that they take it into account when doing the project because it is great for my room. Thank you .
well done looks really nice
Great video, very cool. Would love to see a DIY on how you wired this and the components used
I think if you frosted the plexi glass it would have been much better, but this is dope as fuck.
Dam nice setup brother!
This is amazing! Would love a video on how you did the wled controller though!
Acoustic Foams are used for Echo & Acoustic Curtains are used for Soundproofing SoundProof-Curtains.me
This looks insane🔥
The Amazon site has the foam, wood pieces and stand offs as commonly purchased together.
Saw you on Harris comments, watched, totally worth a like and sub.
This was amazing!!!! I've been subbed for a few months now, but I don't understand why I'm getting this notification so late (4 days late?).
Anyways, dope set-up, I'm about to do something similar myself, wish me luck!
@@FLXtv Could be, I actually remember RUclips crashing for everyone for a day and a half last week as well.
Do you have a discord or Instagram for your channel?
*MASSIVE!*
You mounted the LEDs on the edge but at the end the center lights up as well. LoL
Amazing buddy its great
Great job! It looks really good. My only suggestion is to use a spacer template made from something like some scrap wood. This ensures that the spaces between the hexagons are uniform.
Acoustic Foams are used for Echo & Acoustic Curtains are used for Soundproofing SoundProof-Curtains.me
@@laurabrown790 Quit womansplaining
Dude! You have everything I have lol! But that Hexagon was fing amazing actually, hope I can show you mine soon
Did you ever think of having a few hexagons as mirrors?
me a encantado lo añadire a mi setup gracias por la idea un saludo
so cool!!
Your seriously underrated
lovely!
This is fucking unbelievable!!! 🤩 WoW
Wow!! 😳💪🏼👌🏼
Great Project, I'm glad youtube recommend this. I don't get how you did the leds tho. At 5:06 you've two layers of led strips, at 6:25 it looks like every "honeycomb" has his own few leds. DId you add more leds than it showed?
@@FLXtv Alright thanks for your answer, keep it up.
oh man, thank you for asking this question! I was so confused about that!
Super cool
wish i could just buy a premade panel like this D:
Hello, what motion sensor can I use with 30 meters of ws2812b LED strip connected to an esp32 controller and powered by a 5V 60A 300W power supply? and how to assemble all this, there will be 6 strips of 5 meters each with a number of diodes of 60 per meter, how can I assemble all this and what motion sensor should I use so that it turns on only when someone moves, and then after a while it turns itself off and so that it worked even during the day,
Hello,
Very nice setup!
can you make a video about the programming and circuit etc.. I would be really interesting in watching it.
Cheers,
again great video
nice work, amazing
THIS IS AWESOME!!
love the video. where did you get that Master Chief helmet from?
Back at it with the million sub content!
So Awesome 💯
Awesome! Looks amazing!!! What led brand is that?
That's so cool bro
thah was insane
Quick question how come the certer is illuminating when there is no LED light in the middle. You only put led strips at the side.
something is missing in the video he does not want to tell.
god job it's beautiful 💪😍
How can you program rhe ligths?
Omg this is so cool
amazing greets from singapore
Hey man, good video. Love the diy approach. Any chance you could share, github, etc your arduino sketch, setup you used to sync this all up?
YOU ARE INSANE
Good job Guys ;o)
Epic!
I don’t see the link to the video about how to do the wiring with the led controller. Can you please post?
you saved me about 400 or more so its only right to like and sub
Haha Thank you!