(Part3) Test Tuning Part THRUST TUBE for SEAGULL EDF by PLANEPRINT (3D printed plane)
HTML-код
- Опубликовано: 13 окт 2024
- The new thrust tube works amazingly well. I can only recommend it to anyone who owns an EDF Seagull.
Please read the new manual, because the values of the flaps change due to the thrust tube.
If you have any questions, just ask
Link:
www.planeprint...
www.planeprint...
Wingspan: 1500 mm (59 inches)
Flight weight: 530g and 520g
Wingload: 21g/dm2 (EDF)
Motorization: THRUST EDF Power Set + 30A ESC Ø 40mm | KV=8600 (Pichler)
Filament: Esun LW and Sunlu PLA+
Printers: Artillerie Genius and Anycubic Vyper
Music from Uppbeat (free for Creators!):
uppbeat.io/t/r...
License code: DVYGPOUQIHTSRMXEk
Beautiful flying!!!
Das Ding geht wie auf Schienen!!! Top👍👍
Ja, hoffen wir mal, daß kein Zug kommt 😉
Great flying! Did you use a 40mm, or 50mm EDF? If you used a 50mm, how did you fit it to the internal motor mount? Cheers❤❤❤
I have installed the recommended 40mm EDF from Pichler and have not had to make any changes.
So sad the motor does so much noise... isn't there more silent motor??? The model look absolutely real, beautiful!!! Good video too!
It's just a seagull 😉 . You only need the EDF for a short time, then it's quiet again.
Awesome, congratulations!!
Thanks, it has always flown well, but the thrust tube makes it more stable with the EDF running.
Yes, I read your comment on the video screen and noticed as well, how stable it has stayed when you gradually applied full throttle. Your flight inspired me!!
Thanks, but with the thrust tube, and the settings given, it really does fly almost by itself now 😉
By the way, is there any suggestion related to CG position?
I flew a 1600mAh 2s Lipo, 5mm further forward, then it fitted again. The tube is only single-walled.
This looks great
Do you still use the mixes from the manual ?
throttle to elevator and elevator to rudder?
Thx
Hi, yes, but the one from the new manual. At full throttle, the flaps only go to the 0 position, no longer to the negative.
And she no longer breaks out.
Great
Thank you
Just downloaded the new manual
Will print this asap
Looks like a fantastic upgrade
Congratulations
If I'm honest, I was sceptical at first too, I didn't think it would make that much of a difference. I didn't glue it in either, so it's easy to change.
Hallo hast du ein 2s oder 3s Akku verbaut?
2s 850mAh
THRUST EDF Power Set + 30A ESC Ø 40mm | KV=8600 (Pichler)
what material did you use with the p3 profile? thanks
(for the tube specifically)
PLA+ and 1wall
@@printpilot3d thanks!! Will give that a go
Birds aren’t real!
This is what I am trying to find out 😉
Well done, congratulations! Very realistic!
Do you respect the centring in the instructions? With my seagull it seems too far back?
Everything was done as described in the instructions. Just had to print a new EDF holder in the meantime, material fatigue but everything is fine again