My privacy vinyl is 6 feet height, now I like to cut the panel from 6 feet height to 5 feet height, then install 1 foot semi privacy topper. Will that be workable? Thanks!
I haven't ever seen the picket style here in Oklahoma. all I ever see is the solid privacy fence style. I like the picket style. do you sell the kits and ship out of state? just curious, and what is the price difference between the 2 styles? say 80' x 30' and 2 20' sections. just curious, oh and the no dig version kit. if you even do something like that. I'm just curious on cost.
Great videos thank you Sir Question?? I am a retired Military Veteran and I am in Jacksonville Florida. I am building a drive through gate approximately 11 feet wide and Installing a small 12 foot fence with a walk through gate. What fence, gates, hinges, and hardware would you suggest??? This is for my house that I will sell in 3/4 years I would very much appreciate the guidance Thank you Jason
You're in luck, Jason, we service Jacksonville! Our sister company is in St. Augustine. So with that in mind my first recommendation would be to get a free quote off the website and think about letting us pop out and get that done for you. 👍🏻 swiflorida.com/quote-tool/ Secondly, I would recommend scrolling through some of the other videos on our channel, we have quite a few that you should find informative. No-Dig Vinyl: ruclips.net/video/23SacHpNIdc/видео.html No-Dig Cedar: ruclips.net/video/GAfhMpKdxDw/видео.html Our favorite hinges & latches for vinyl: ruclips.net/video/3ypIPmPFA7Y/видео.html Our favorite hinges & latches for cedar: ruclips.net/video/k3W2wd2sK4o/видео.html Keep scrolling--you'll probably enjoy some of the others on there as well. If you still have questions after that, please let us know. 👍🏻
That is awesome. Thank you for the response. I will look up the St. Augustine location. Hopefully they are as awesome as you guys Rock n Roll Y’all Jason
Hi Sam… Glad to meet ya! Perhaps you can help me. I just started putting up peg board in my shop. It has all kinds of cutouts in it. There are electrical outlets, air line penetrations, slots to wrap around trusses, windows, doors, vents… you name it, someone has to cut it. As a longtime fan & subscriber perhaps I’ve accumulated enough Brownie Points to call in a favor. Would it be possible to borrow that fancy zip router thingy for a few days? It would save me a ton of Roto-Zip and jigsaw cutting. And, I could just push a button and enjoy my coffee and muffin by the stove, while it did did the tedious part. Please check the balance in my subscriber account and let me know. PS: There is no need to tell Dan… he’ll get himself all worked up and forget to have a good danged day.
Sam must be a top notch guy with a name like that. LOL I do have a question. I'm guessing that the CNC router can store previous patterns so you can go to those when needed or do you have to start from scratch each time?
Ok guys I need your help! I have a custom vinyl 4 ft fence . A lovely tree branch smooshed and damaged 1 section. I will get more exact measurements ( it's raining). The company who made it went out of business. I have a door outside to keep wild animals out and my dogs in. I've checked with all local companies but 1-2. I know I need a top rail, bottom rail and possibly 1-2 slats. I salvaged everything possible. I honestly thought I'd have to gorilla glue it together.
Call the shop and talk it over with the guys. Depending on the original make of your fence they may or may not be able to get you what you need. 👍🏻 307-578-8040
Most excellent, per usual, guys.
My privacy vinyl is 6 feet height, now I like to cut the panel from 6 feet height to 5 feet height, then install 1 foot semi privacy topper. Will that be workable? Thanks!
Another great video if you wouldn’t mind sharing where can you purchase this cnc router and how much does the average cost for that machine
There are two companies that make them: SSD & CMM
Entry-level routers will run you about $25,000 roughly.
I haven't ever seen the picket style here in Oklahoma. all I ever see is the solid privacy fence style. I like the picket style. do you sell the kits and ship out of state? just curious, and what is the price difference between the 2 styles? say 80' x 30' and 2 20' sections. just curious, oh and the no dig version kit. if you even do something like that. I'm just curious on cost.
We definitely ship stuff out of state! Call and talk to one of the shop guys when you've got time and they can get you all that info. 👍🏻 307-578-8040
What manufacture do you use to purchase your raw materials?
National Vinyl Products www.nvpfence.com/
Great videos thank you Sir Question?? I am a retired Military Veteran and I am in Jacksonville Florida.
I am building a drive through gate approximately 11 feet wide and
Installing a small 12 foot fence with a walk through gate.
What fence, gates, hinges, and hardware would you suggest???
This is for my house that I will sell in 3/4 years
I would very much appreciate the guidance
Thank you
Jason
You're in luck, Jason, we service Jacksonville! Our sister company is in St. Augustine. So with that in mind my first recommendation would be to get a free quote off the website and think about letting us pop out and get that done for you. 👍🏻 swiflorida.com/quote-tool/
Secondly, I would recommend scrolling through some of the other videos on our channel, we have quite a few that you should find informative.
No-Dig Vinyl: ruclips.net/video/23SacHpNIdc/видео.html
No-Dig Cedar: ruclips.net/video/GAfhMpKdxDw/видео.html
Our favorite hinges & latches for vinyl: ruclips.net/video/3ypIPmPFA7Y/видео.html
Our favorite hinges & latches for cedar: ruclips.net/video/k3W2wd2sK4o/видео.html
Keep scrolling--you'll probably enjoy some of the others on there as well.
If you still have questions after that, please let us know. 👍🏻
That is awesome. Thank you for the response. I will look up the St. Augustine location. Hopefully they are as awesome as you guys
Rock n Roll Y’all
Jason
Hi Sam… Glad to meet ya!
Perhaps you can help me. I just started putting up peg board in my shop. It has all kinds of cutouts in it. There are electrical outlets, air line penetrations, slots to wrap around trusses, windows, doors, vents… you name it, someone has to cut it.
As a longtime fan & subscriber perhaps I’ve accumulated enough Brownie Points to call in a favor. Would it be possible to borrow that fancy zip router thingy for a few days?
It would save me a ton of Roto-Zip and jigsaw cutting. And, I could just push a button and enjoy my coffee and muffin by the stove, while it did did the tedious part.
Please check the balance in my subscriber account and let me know.
PS: There is no need to tell Dan… he’ll get himself all worked up and forget to have a good danged day.
I was loading it on the truck to ship it down to you but Dan caught me and made me put it back! ☹
@@SWiFence dog-gone-it… did I lose all of my Brownie Points?
Sam must be a top notch guy with a name like that. LOL I do have a question. I'm guessing that the CNC router can store previous patterns so you can go to those when needed or do you have to start from scratch each time?
It absolutely will store whatever program you input. 👍🏻
Ok guys I need your help! I have a custom vinyl 4 ft fence . A lovely tree branch smooshed and damaged 1 section. I will get more exact measurements ( it's raining). The company who made it went out of business. I have a door outside to keep wild animals out and my dogs in. I've checked with all local companies but 1-2. I know I need a top rail, bottom rail and possibly 1-2 slats. I salvaged everything possible. I honestly thought I'd have to gorilla glue it together.
Call the shop and talk it over with the guys. Depending on the original make of your fence they may or may not be able to get you what you need. 👍🏻 307-578-8040