Husqvarna | Brushcutter 545RXT With a 2 Tooth Grass Blade.
HTML-код
- Опубликовано: 27 июн 2021
- For example, if there is overgrown July grass waiting for someone, it is already a task for the grass knives. In an emergency, even a trimmer line can handle such tall grass, but as it is tough and strong, it will not be a pleasant job, the grass puts too much resistance on the trimmer line in such cases. Which brings us to the issue of choosing the right.
2 Tooth Grass Blade
The flat profile offers high productivity, supports jobs in dense grass, great performance. (Not to be used on thick woody growth).
www.husqvarna.com/uk/grass-bl...
Always in the right balance.
Balance XT2, the continuation of the very popular Balance XT harness.
www.gplshop.co.uk/en/harness-... 
Наука
Very nice machine with impressive power specs and 45 cc. I might have to jump into one of these husky rigs someday. I’ve got grass blades but I really never use them on my customers property cause they don’t mulch the grass down they just cut it. It looks a lot better up close when it’s mulched down rather then just knocked over but of course depends what you’re going for and what’s needed
Hey sir. Would like to ask, how we decide when to use grass blade or string? Thank you
When the grass get tough.
Great job! Is there any big difference between 545rx and 545 rxt? Looking to purchase one and not sure wich one
The RX and RXT models are single platform machines, and the RX differs from RXT in the equipped harness for example, 545RXT model comes with a Balance XT harness as standard the best ever unmatched (also for women)
@@AutoTuneTM 545RX no autotune.
545RXT=autotune version!
I hear the machine revving up and down. Isn't constant revs the way to go? Thanks for the vid
The biggest challenge newbies face is maintaining a steady pace. The revolutions in the process of mowing should be changed, which depends on the density of vegetation. If the grass is young, then it is not necessary to work at full capacity to cut it. The operator must feel the work of the brushcutter. If the brushcutter does not cope with the grass, you need to increase the speed. There is an opinion that it is better to mow in one speed mode. This opinion is not correct. Working with the same power not only affects the increase in fuel consumption, but also the wear of parts. The release of gas during the reverse movement of the tool is useful, since during this period the motor cools down, as well as the lubrication of the CPG. Releasing gas causes the throttle valve to close, as a result of which fuel passes through the idl channel, and thus lubrication of parts is carried out At the same time, it is not recommended to work with the tool constantly at full speed. If you mow in one speed mode (this is usually done by beginners), then this will affect the increase in fuel consumption and engine overheating. For comparison, you can imagine the work of a chainsaw. The sawyer gives maximum speed only when necessary, but when the cutting of the tree is completed, the chainsaw runs at idle, thereby cooling it down.
Hello. Have you been using rx545 for a long time, have you had any problems?
Нет проблем, если атноситься к технике с уважением. Однако любую технику рано или поздно надо ремонтировать- ведь все, что грохочет, изнашивается.
What is yours opinion about "core cut" line?
The flagship cord, the Core Cut monolithic star, is the best Husqvarna solution for professionals. It is the perfect combination of high energy efficiency and high performance. The new patented combination of PA6 / PA66 polyamides and additional additives provides the cord with impressive durability coupled with extraordinary elasticity. In addition, the composition significantly reduces cracking, is distinguished by increased chemical and climatic resistance. The improved formula of Husqvarna Core Cut has reduced the difference between the components (Core and outer shell), which also gives the line additional strength over the previous generation. And the new star shape provides a more aggressive mowing angle, again increasing operator productivity.
fűkasza tengely törés oleo mac mit lehez csinálni kés tuskoba vágott és eltőrtt a tengely ki kell dobni?
Dobd már ki bazd meg.
There are no rocks on the surface so it is possible to cut without the plastic shield. It just makes work slower.
Ок👏👌👍