ESP32 GPS Tracking Device | Vehicle Tracking System | Enclosure design.
HTML-код
- Опубликовано: 27 авг 2024
- This enclosure is designed for a GPS tracking system using ESP32 PCB. You can use this device as a portable or fixed mount somewhere. The enclosure design is compatible with waterproofing (IP 64), so you can mount this outside. We used M2 screws for the component and M3 screws with rubber washers for the covers. You can use M5 - M6 screws for the wall mount, but we recommend M6 screws.
Enclosure size (X, Y, Z):- 74mm x 83mm x 29mm
Part List:-
1. ESP32 devkit v1 Board
2. Ublox NEO6M GPS Module with antenna
3. SIM800L GSM Module with antenna
4. 2G SIM Card (standard size)
5. Battery 18650 3.7v 2000mAh with battery holder.
www.tme.eu/en/...
Download 3D CAD files:-
www.thingivers...
electronics and programming Information:-
• ESP32 SIM800L GPS Trac...
💠We are not responsible for this project's electronic design and programming. So please test the project before starting 3d printing.
💠Please follow the part list photo/PDF for the fitting components.
💠If there is any issue with the enclosure. Please contact us. I'm happy to help you.
Contact us to design your product.
www.sketchwork...
#sketchwork #enclosure #esp32
good work man
Thank you 👍
pretty cool!
Thank you
Fusion 360 sir ??
Do ładowania trzeba rozkręcać? Nie można dodać gniazda ładowania i balancera?
English please.
@sketchwork_ For charging you have to disassemble? Can't you add a charging socket and balancer?
yes. we can't do that because this is a waterproof enclosure and DIY. it will be complicated to assembling and 3d printing and size also have to be increased.
I want to learn design about enclosure do you teach it?how much?
Sorry, we are not teaching.
@@sketchwork_ thank you so much!