If you are looking to get a Glowforge you can use our referral code to get: $500 off a pro, $250 off a plus, or $100 off a basic. We'll get credit too! Use the link below. We love our Glowforge. Feel free to message us with any questions! glowforge.us/r/DSKCNJZL
Well... you just blew my mind. We have a couple lasers and sell on etsy. This is absolutely inspiring! I love what you did with the plexi. I have done a couple of U.S. maps and might incorporate it into my designs. Great work!
@@WhenGeeksCraft Ya, thanks, need to make more. Maybe we could colab sometime, I'll make one and send it to you for some resin details or something. Regardless, keep at it!
@@GeeksWoodShop dude that would be dope. You make a custom wood handle and we make a resin blade. Definitely going to bother you about that in the future!!!
I really love your awesome work! You really helped make up my mind to jump in and purchase a glowforge! Once it's in I'm going to be buying this off your Etsy page. FYI I used your promo code on my order for the glowforge pro. You should be getting kickback from glowforge soon!
This is amazing!! I have a few questions... Did you stencil the acrylic or was it done in the glowforge? It skips right over it on the video to you pulling off masking tape. Also, the frame edge. I see they have an adhesive backing. Are they premade with that shape? Did you make them in the gf? Obviously you did the elvish writing on them but wanted to know if that was something you made or purchased and where. Thank you so much! I'm new and your videos have been so helpful
every piece of this was made using the Glowforge. The acrylic was etched, painted white, then had its masking removed. the fram was made of adhesive backed veneer. they were cut and engraved in the glowforge. I made all the files myself. they are all available on patreon now!
This is beautiful! I have so many questions now 🤣. You masking seems so much stronger than what I use. What masking do you use? Also, love your clips! Where are they from? 🙈 Lastly, what did you use to glue the acrylic piece on? Thanks for sharing and taking the time to make a video!
1. 3m 6in masking tape on all non glowforge proofgrade stuff. Works well for masking and painting. 2. Amazon. Sewing clips 3. UV resin. Small little bits because super glue dogs clear acrylic and all other glues take a long time lol I'm gunna make a tutorial on how I make these next so stay tuned!!
@@HowIDoIt I wish I did.....every time I tried setting up an affiliate account I was told I didn't have enough followers....even though I do. Maybe one day
10ml Syringe Sterile with Luer Lock Tip, BH SUPPLIES - (No Needle) and BSTEAN Industrial Unsterilized Syringe Blunt Tip Dispensing Needle with Luer Lock 14 Ga 1.0 Inch - 50 PCS I fill the resin in then i put the needle on. its easier since its so thick www.amazon.com/gp/product/B07KW4KLG2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 www.amazon.com/gp/product/B01I1APLIG/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
If you are looking to get a Glowforge you can use our referral code to get: $500 off a pro, $250 off a plus, or $100 off a basic. We'll get credit too! Use the link below. We love our Glowforge. Feel free to message us with any questions!
glowforge.us/r/DSKCNJZL
Every single video. The quality. The effort. The references to geeky things that I’m in love with.
I'm glad we are able to consistently please :) thanks for always being here!
This one turned out really well. I like your choices on what info was on each layer.
Thanks so much!
I am an absolute fan, your detailing is exquisite!
Thank you!!!
Simply amazing
Glad you think so!
This is beautiful! The music is so fitting and just adds to the character of the piece! Great video!
Thanks!!
Well... you just blew my mind. We have a couple lasers and sell on etsy. This is absolutely inspiring! I love what you did with the plexi. I have done a couple of U.S. maps and might incorporate it into my designs. Great work!
Thank you! Glad you liked it!
This has sparks so many ideas. Great build.
Well thank you! I hope you follow those Sparks and make something dope!
Amazing video and craft. Thanks for inspiring all of us.
My pleasure 😊
So awesome. Great to meet y'all, looking forward to what's yet to come!
same! awesome to meet you! Make more cool swords :) we love your channel!
@@WhenGeeksCraft Ya, thanks, need to make more. Maybe we could colab sometime, I'll make one and send it to you for some resin details or something. Regardless, keep at it!
@@GeeksWoodShop dude that would be dope. You make a custom wood handle and we make a resin blade. Definitely going to bother you about that in the future!!!
@@WhenGeeksCraft Excellent!
Gorgeous work!
Thanks!
the witcher one is more impressive, but thanks to this video it is much easier to grasp how you do it. And appreciate your craft by the way )
Thanks!
Awesome project and video! Subscribed! I think gold paint on the Tengwar lettering around the boarder would have also been a nice touch.
I was going to but it's so hard to engrave on veneer with tape and then it's hard to paint without tape lol had to pick my battles
Wow that's amazing!
Thanks!!
You are amazing!!!
this is amazing!! thanks for sharing!!
No problem! thanks for watching
I really love your awesome work! You really helped make up my mind to jump in and purchase a glowforge! Once it's in I'm going to be buying this off your Etsy page. FYI I used your promo code on my order for the glowforge pro. You should be getting kickback from glowforge soon!
We actually took the files down from Etsy but have them all on patreon now! But I'm glad you like it and that you used our code! Thank you!
@@WhenGeeksCraft awesome I'll join your Patreon then cause my wife and I love your designs!
That's so nice! Thank you so much!!
great work!
Thank you! :)
This is amazing!! I have a few questions...
Did you stencil the acrylic or was it done in the glowforge? It skips right over it on the video to you pulling off masking tape. Also, the frame edge. I see they have an adhesive backing. Are they premade with that shape? Did you make them in the gf? Obviously you did the elvish writing on them but wanted to know if that was something you made or purchased and where. Thank you so much! I'm new and your videos have been so helpful
every piece of this was made using the Glowforge. The acrylic was etched, painted white, then had its masking removed. the fram was made of adhesive backed veneer. they were cut and engraved in the glowforge. I made all the files myself. they are all available on patreon now!
this is incredible. I couldn't find the files on etsy tho. Where do you have them?
We moved them all to patreon!
i’m thinking about getting into map making, how exactly did you use the spray paint to fill in the black?
This is beautiful! I have so many questions now 🤣. You masking seems so much stronger than what I use. What masking do you use? Also, love your clips! Where are they from? 🙈 Lastly, what did you use to glue the acrylic piece on? Thanks for sharing and taking the time to make a video!
1. 3m 6in masking tape on all non glowforge proofgrade stuff. Works well for masking and painting.
2. Amazon. Sewing clips
3. UV resin. Small little bits because super glue dogs clear acrylic and all other glues take a long time lol
I'm gunna make a tutorial on how I make these next so stay tuned!!
When Geeks Craft yay! Thank you so much!
Anytime!
What kind of glue do you use to seal the inside before adding resin?
CA glue or super glue.
you should so a westeros map
awesome! dunno what middle earth is, but I love the techniques. What paint pens do you use for the fill color?
Middle Earth is from lord of the rings. Paint pens were from Amazon ZEYAR Acrylic Paint Pens
@@WhenGeeksCraft Thanks! I'll check them out, if you have an amazing affiliate drop a link to them in here and I'll use it
@@HowIDoIt I wish I did.....every time I tried setting up an affiliate account I was told I didn't have enough followers....even though I do. Maybe one day
Hi, absolutely love this! Do you sell these? If you do, Definitely interested in knowing how much you charge. Thanks😁
hello! Unfortunately we dont sell these anymore. we are focusing more on new youtube content rather than remaking older projects
Where do you get the syringes you’re using for the detailed sections of resin?
10ml Syringe Sterile with Luer Lock Tip, BH SUPPLIES - (No Needle) and BSTEAN Industrial Unsterilized Syringe Blunt Tip Dispensing Needle with Luer Lock 14 Ga 1.0 Inch - 50 PCS
I fill the resin in then i put the needle on. its easier since its so thick
www.amazon.com/gp/product/B07KW4KLG2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
www.amazon.com/gp/product/B01I1APLIG/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
Thanks!
@@mikebristol6466 no problem!!
Your video says the files are available on Etsy, but then you moved them to Patreon. Not cool...
You're upset that we changed our file structure from a two year old video? Makes sense.