**GAMING QUESTION ANSWERED** for more tests (Fortnite @ 60fps) check out this video ruclips.net/video/_bYXp0aoQfE/видео.html made by @Sly_Botts, a commenter down below. His M91p setup is intuitive, budget friendly, and will give you an idea of game performance if your system is similar at all.
@@alexzhang3836 The M81 looks similar to the M91p. What are the specs in your M81? The best graphics card I have heard someone installing in a similar model (M93p) is a GTX 1050 ti Low Profile. That would be a very nice upgrade. The M81 seems to have the same CPU Socket type as the M91p as well as similar RAM config. www.cnet.com/products/lenovo-thinkcentre-m81-sff-core-i5-2400-3-1-ghz-4-gb-250-gb/
Lenovo actually tested GTX 1050Ti low profiles on a lot of their sff machines. If you're planning to game a lot, I'd recommend the low profile GTX 1050Ti otherwise you can get the GT 1030.
Absolutely agree. I had a couple geforce gt 210 cards lying around, so I thought they would be good enough to at least demonstrate how to install a card. They don't have a great benefit, though. I would have loved to test out a gt 1030. I have one or two coming my way now, but I don't have any more M91p's. M93p's I will have, though.
Thanks for the video. For any fast moving game 25 to 30 frames per second are minimum, in my experience. Rather reduce settings to get the frame rate up.
The GT 210 I installed in this build is terrible for gaming. I should have mentioned that in the video! Definitely can install something much much better.
Dumb question here?!?!?! If you would have had your sata cable and sata power splitter with 90 degree ends, would you still need to cut the metal leg off of the optical drive stand to make it fit? Looking at the 22:05 mark, you do not really mention it and it is hard to see clearly. Thanks again for the video. Lots of good info here for the budget minded.
Moving over from iMac. Got a M91 16gb ram/i5...etc. Fingers crossed. Just need to use F/book while having my bible program running (and some others). My iMac just couldn't pull the load! LOL...so I'm BACK to PC. Been 15 years or more. Didn't cost me much to purchase the M91 and it's twice the "power" the iMac has. Had major problems w/ Parallels. Over it. Thanks for the video as I orient myself back to PC.
Hey thanks for the video man! I just bought this PC and it comes with a 250gb hdd with windows 10 installed. If I want to upgrade the storage to sdd or bigger hdd, is it possible to move my windows 10 onto the new one or do I need a new licence?
If you don't want to go through the process of cloning a drive: Is there a Win 7 Product Key somewhere on the case? If not, go here and scroll down to the "Method 2: Using Script" section. www.winhelponline.com/blog/view-your-product-key-windows-10-8-7-script/ You can retrieve the product key by creating a text document, copy+paste the script, and then save the file as "all files," name it what you want, and add the .vbs file extension. Use the example on the site.
I got an old lenovo think centre 7052 m91p with the same cpu i5 2400 3.1ghz. 4gb ddr3 1333mhz ram. I bought 12 more gb but haven't got it yet. I pulled out the drive bays and added a fan I took out of a dell optiplex 760. I had to rewire the fan because dell likes to be dell. I put a GT 1030 in it and an 850 evo ssd. it runs fortnite at 720p on high settings at 60 fps. Cpu idles at 33 to 35 degrees. I also swapped out the psw with a power color 600w with an intake and vent fan so there is good airflow in the chassis. I'll make a video.
Wow, that's pretty good performance. You should post a video and share it here. I'll link to it in my description. Many people ask about gaming performance and I have only tried so many games with so many hardware configurations, so your info is appreciated! Edit: I pinned this comment to the top of the thread.
@@HaisteComputerRepair I forgot to add that med settings for shadows though i think it still ran at 60fps. This is 720p though not 1080p at 1080 med settings most likely with shadows off or low. Bottom line, it plays esports titles fairly well, and on higher settings with 720p res
@@HaisteComputerRepair I made a quick video today to show you what I did. I'm not a professional and I don't have good lighting or equipment but I did what I could. I also had issues with screen capturing so I used my camera. Here you go: ruclips.net/video/_bYXp0aoQfE/видео.html
@@sly_botts1189 The lighting in the video makes it look like you live in a cave! Kidding aside, I am going to pin this comment or post one of my own and include the link to your video. Thanks for making it, I will refer people to it as it comes up :) EDIT: linked your video as the top comment.
The HP SFF are very similar in price and performance and allow a 3.5" and 2.5" drives in proper bays, no metal snips required. I personally would take the optical drive out before doing dodgy stuff like zip ties and double sided tape. I like Lenovo as a brand, but that generation computer, HP ( or even Dell ) are less problematic to uprade than Lenovo.
I actually have found that certain lines of Lenovo are the easiest to upgrade and modify. There aren't many proprietary things like power supply and fan connections. Dell was the worst for this in my experience. Of course, not all Dell PC's, but many. Lenovo business class are well built and user (and IT) friendly.
I bought a AMD Raden R7 series 250 with the same tower you have in this video for some reason it won’t read the card, do you know what I can do to get it to start reading it? Thanks if you can help.
Just to verify that you have it installed in the PCIx16 slot closest to the heatsink? Are you getting any display at all from the card? Check in BIOS to see which display is default or leave it alone if it is set to auto. Can you confirm that the card works, perhaps in another PC? Likewise, can you confirm that the PCI slot is good on your motherboard by testing another card or from previous use?
@@nathonkeesee4297 So it's getting power but no display? Did you check BIOS? You will have to plug into the display input on the motherboard I/O. Can you do that?
Hi. Made the same upgrades (without the graphics card) but now I'm having an issue: desktop won't shutdown (only turns off screen) and can't awake from suspension... I've searched online and learned that disabling "fast boot" in energy options solved the shutdown issue, but won't awake from suspension... have all the right configs, mice and keyboard won't awake, only with power button but goes to win boot manager, gives an error and have to restart. tryed another clean install but won't work. any thoughts on this? I think that it's related to previous instalation was in Hdd legacy and this one has to be in UEFI due to SSD... Did you had any issues like that? thanks in advance.
I had that problem once with an HP Compaq 6005 Pro PC. I believe the problem was a display driver for Window 10. It was solved with the addition of a graphics card, but I believe the correct driver also solved the problem . try searching for the graphics driver on the M91p website. It would likely be a Win 7 driver.
what are the differences between this model and the M73 sff? found a guy thats selling the M73 sff for around 100$ USD, had a i5 4690, 4gb of ram and a 500gb hard drive.
The difference would be that the M73 supports 4th gen Intel i5 while the M91p supports 2nd gen i5. As well, the integrated Intel HD 4400/4600 is better and there is USB 3.0 instead of just 2.0. $100 is not bad at all, you can easily upgrade to an SSD+HDD combo and get that RAM up to 8GB at least. Hit me up if you need help sourcing parts, I will likely have something in my shop or will help look up deals.
Hey man, great video, I have a m82 sff, 16gb ram DDR3, i7. I just bought the XFX Thicc II Pro AMD radeon RX5500 XT graphics cards and I was wondering about the capability of the card and the board. Will the GPU fit on the board if the whole thing was moved to a new PC case? Im worried about the proximity of the ram slots to where the board will be. Thanks
I'm not sure to be honest. Definitely take out the plastic piece around the CPU fan. Maybe it would sit right on top of the tabs for the RAM slots. Are you able to open up the tower case and take a look? Be mindful of needing a power supply that has an extra power plug for the card. Let me know if it does fit.
@@HaisteComputerRepair so yes my board matches the one in this video and I am aware and have a 500w PSu coming for this build. So yes the issue is the size of this card and the possibility that it won’t fit due to the proximity of the Ram slots.
@@HaloProductionsUSA Yeah totally. Check out this page. It has the length and height dimensions, so you could go to the board and measure the approx area needed. www.techpowerup.com/gpu-specs/xfx-rx-5500-xt-thicc-ii-pro-8-gb.b7518
@@HaisteComputerRepair I actually tested it out on the board and it didn't fit. I ended up going with a shroud less Zotac 1660 Super Compact which should fit when specs and objective data is applied
Awesome video. I just added a SSD to M series. I left the original HDD in and was going to clone from HDD to SDD. But they SSD is not showing up. Have both cables hooked up. Any help would be appreciated
Is the SSD not showing in Windows or BIOS? If you haven't checked in BIOS, navigate to Boot Options and check to see that the SSD is included in the Boot Order from all categories you are able to do so.
@@GaneshMKarhale If you compare your i3 here tinyurl.com/y63k9t7e with the i5 in the video tinyurl.com/y2l6zegr you'll see that they have the same socket type. I assume you will be able to use the i5 in this video, based on this. Which would be a good upgrade.
Check out the case swap on this M93p. The process is near identical to an M92p ( just did an M92p case swap today). ruclips.net/video/xZ5ArnqXGzA/видео.html I'll have a more detailed video for my next upload.
i recently have gotten a gigabyte gt 1030 low profile graphics card. when i put the card into the slot and turn on my pc, the fan on the card turns on and all of that but the pc doesn’t pick up the card. i don’t know what to do and i think coming here and asking you might help the specs are stock, core i5 (2nd gen) 2500, 8GB ram, 1tb ssd is there a fix or something? hope there is. thank you
Some basic things you may have already tried: 1) This might sound like a silly question, but you for sure connected the display cable to the card? Each display port doesn't show anything on your monitor? Ex: you tried the HDMI and DVI and the both don't work? 2) Try manually selecting the display option on the monitor by pressing the source button (located on the monitor) 3) Try different display cables. Could be the one you're using isn't working. 4) Do you have another PC you can test the card in? Did you buy it brand new or used? Let me know and we can dig deeper if needed.
The last time I did this, I put everything into a Vista era Lenovo tower, as seen in this video: ruclips.net/video/cJKCKDo9_3w/видео.html I'm certain you can move it into any case you like, just be aware of where certain components, like the front USB port board, can fit. Or, if you are planning to upgrade to a USB 3.0 board. Where would you put it (PCI slot? Is there room with the graphics card?). Do you plan to upgrade in the future? Maybe it's worth it to take a look at a budget case that would go well with a budget build, until you have enough money to contribute towards a powerful gaming build. Be sure to take lots of pictures so you remember where everything plugs in on the motherboard. As always, be sure to prepare yourself mentally for some troubleshooting in case you need to figure something out. I think I will make a pcpartpicker.com build page once I get the time to migrate one of my M91p's.
Are you installing a new HDD or SSD with a fresh install of Windows? Or wishing to move (aka "clone") your current Windows setup to a new HDD or SSD? There are a few different things you can do. First, though, are you looking to back up both personal files and software? Ex: pictures, music, and Adobe Photoshop or MS Office 2019, etc, or, just personal files. If it's just personal files like pictures and music, you can backup to an external hard drive. With paid-for software, if you have product keys, you can likely download the programs again and resume using them. Free software you should be able to download again using the same information (email, username, password, etc) you originally used when you got it. In other words, you can install a fresh copy of Windows and then download and put whatever you want back to how you would like it, just like the first time you started using your PC. If you're looking to "clone" your HDD to a new SSD, there is software you can use that will do this for you. Cloning is taking your current Windows experience and putting it on a new drive. You will need to be able to connect your new HDD or SSD to your computer in order to clone from your current HDD. If you can answer these questions with some detail, we can go from there. Does that make sense?
So I got the PC originally from new egg refurbished with parts and OS already installed. But I wanted to upgrade my hard drive, ram,and Im also adding a graphics card (doesn't have one currently) so I want to know a way to get my current info on to new HDD. Don't have anything special personally on PC . Just a streaming rig but would like my programs and windows 10 but if there is no easy way to do that . How do go about getting windows on new HDD I can reinstall everything else worse case
@@darriusteeter Ok, so this is how you can install a new copy of Windows 10: Is there a Windows 7 product key anywhere on the tower case? If not, there are two different ways to find your product key here: www.winhelponline.com/blog/view-your-product-key-windows-10-8-7-script/ Once you have the product key, you can download a copy of Windows 10 .iso here (click on download Tool Now): www.microsoft.com/en-ca/software-download/windows10 Make sure you have a usb stick with at least 6GB worth of space. Take everything off the usb stick you might need as it will be formatted in the process. Follow the directions on the Windows download tool, it's pretty easy. Once you have the Win 10 .iso loaded on to the usb stick, install the new HDD in your tower, power on, hit the enter key at the ThinkCentre Logo, select the Boot Options from the menu, select the USB option, and the rest is straightforward. Remember to have that product key on hand as you will need it. This is a better option than cloning. If you don't have anything to transfer over, do this. If for some reason you can't find your product key through these methods, let me know. I would assume that NewEgg would have installed a legit copy of Win 10. Note: before installing Win 10 and while you are installing the new HDD, install the RAM and the Graphics Card as well. Then install Windows 10 as it will preload and install drivers for you. Once Win 10 is loaded, hit the Windows key, type updates, check for updates, download, and then restart. That should take care of the drivers for the graphics card and everything else.
If you buy new, the low profile brackets will come with the card. Used, you'll have to ask the seller. Otherwise, you can find them from eBay sellers, just search "low profile graphics card brackets" and find one that matches. Also, you could always cut and modify tall brackets with a pair of metal snips and pliers.
Hi, how is it going? I recently upgraded my lenovo thinkcentre m91p sff with a gt1030 and a 1tb ssd, and tried to restart my pc and delete everything, after a lot of hours have passed by, when selecting the language, my mouse and keyboard didnt work so i couldnt do anything, also ive tried a lot of solutions, but none worked. today i downlaoded a media creation tool on a usb and plugged it in my pc to install windows 10. i went threw all the installation process and all of that, but when it got to the final stage of finishing everything up, it says that a restart is needed so i restart and it goes again into the installation windows process, over ans over again. am i doing something wrong? i think not. could you please help, as you helped me in the past. i thank you a lot for everything. but could you please let me know any solutions for this?
If it keeps booting to the Windows install, have you tried removing the USB with Windows on it, after you have installed Windows? It sounds like the USB is in the top of the boot order, which you can change in BIOS
For sure, that would be an awesome card to install. Of course, look for the low profile version and don't forget to make sure you get the low profile brackets to fit the small case.
Hello, I have the m91p desktop, I used an amd hd 6670 video card, replaced it with an rx550, but now the pc does not display the video, I already updated the bios and it did not help the card was tested on another pc and it worked only on the m91p that card no video, can i install different desktop bios like m92p or m93p?
Any SATA 2 or SATA 3 Solid State Drive would work. Any SATA 2.5" or 3.5" hdd would work (SSD highly recommended). Look for any RAM that is DDR3 1600MHz. 1333MHz RAM would work as well. Look for 2GB or 4GB sticks to have either 8GB or 16GB installed. Preferably, all sticks will be the same make/model. Graphics cards, look out for a 1GB DDR5, such as the GT 730, or a 2GB DDR5 like the GT 1030. Do you have a ThinkCentre? If so, which one? I just put together a ThinkCentre M93p that could play Valorant well. Check out this video: ruclips.net/video/BderaGy5y4I/видео.html
For sure. You can migrate everything over to any larger case that matches the motherboard screw locations. Just be aware that you will have to customize and troubleshoot in the event something goes wrong. Ex: once, I migrated an M91p to a larger case and, for some reason, the CPU fan started running at max speed at all times. I ended up installing a fan with lower amperage.
Hi, I have installed an ssd earlier, I got the pc with windows 10 already installed to the hdd, I would like to know how to transfer the windows 10 to the ssd, so I can have my pc faster overall. Do you have like a tutorial or an article to share? Thank you!
Is this a Lenovo ThinkCentre M91p you have? If not, what do you have? If it is a ThinkCentre of this era, there should be a Windows 7 key you can use to activate Windows 10. So, with that in mind, you can do a fresh install onto the SSD and set up the HDD as storage, if you like. A fresh install is the best. If you really want to, you can also clone the HDD to the SSD with Macrium Cloning software. So, 1)do you have a Win 7 key on the tower? 2)Are you ok with doing a fresh install on to an SSD? (It's pretty easy). Let me know and we can go from there.
I know it's not really an upgrade unless you want HDMI. I should have made that clear, but I didn't really think about it at the time. It was just what I had lying around my shop. I've done a similar follow up with a GT710 (moderately better). And Some 4GB cards which are great. Consider it a how to install parts for someone trying to learn.
I installed a GT 210, but I do not recommended that card at all. If you are looking for Low Profile GPU: GT 1030 for budget, GTX 1050 little higher budget, GTX 1050 ti, and then GTX 1650.
I bought this one from someone in Canada on Kijiji.ca. I've found that it really helps to stay on top of multiple buy and sell sites, eBay, etc, to find the deal. This was probably $50 CAD. Only really worth it for older towers.
It should work just fine. Make sure you get the low profile option unless you have a larger tower case or plan to migrate everything from a SFF to larger tower case. Always expect some kind of troubleshooting, so maybe try to look up some info on other people installing the same thing.
I believe it should work, though I have never tried. It should. I have installed an AMD HD 6450 2GB card before, so AMD does work on M91p towers. You might have to configure graphics in BIOS. Is the 7470 something you want to try or is it a deal you are finding nearby?
If you're just installing a low profile graphics card, you don't need to do anything with the CPU. There probably isn't any kind of lid on a CPU. Just the heat sink and a little lever contraption that holds it in place on the board. Does that help?
@@HaisteComputerRepair The 1050 ti Low Profile has measurements of H=30 L=172 W=113mm and the plastic black lid around the CPU cooler is in the way, so can I remove it and leave the cpu without it?
@@kluthai Oh, I see what you mean. The black plastic piece around the CPU fan? You can take it off, just make sure to monitor how hot the CPU gets with it missing. The fan will still blow air down through the heat sink, just the black plastic piece won't be there to help distribute air flow in the small case. Just so we're on the same page, only remove that black plastic, not the fan and heatsink below it.
Check out this page: www.cpu-world.com/Sockets/Socket%201155%20(LGA1155).html Read the "Upgrading Socket 1155 Motherboards" section for how to look up compatibility for the large list. I would go for anything quad core and highest clock speed available. Maybe one of the i7 options.
@@joeharyar9873 Yep, the low profile cards will be powered by the motherboard and only draw up to maybe 75W. No power connecter from the power supply is necessary, unless you case swap and install a full size video card.
hey man i just bought a LENOVO M91 SFF Desktop Computer, 3.4 GHz Intel Core i7 2600, 2 TB HDD, 16 GB DDR3. i need to upgrade the graphics card. what do you recommend?
I would look for a Low Profile 2GB DDR3 64-bit(or 128bit) Graphics card. Nvidia GeForce, AMD Radeon, EVGA, Zotac, etc. Any of those brands. Surf some buy and sell pages for a deal. Just like the one in this video, but 2GB instead of 1GB. Try to find one that has info on www.techpowerup.com. That site has information that is easy to read. Check out this one: www.techpowerup.com/gpu-specs/geforce-gt-710.c1990#:~:text=The%20GeForce%20GT%20710%20was,the%20card%20supports%20DirectX%2012.&text=GeForce%20GT%20710%20is%20connected,PCI%2DExpress%202.0%20x8%20interface.
@@HaisteComputerRepair hey man I don't know anything when it comes to these specs. would a EVGA GT 710 2GB DDR3 64-Bit Graphics Card, Single Slot, Low Profile fit?
@@castabouttv5129 Yes it would and that is an awesome fit for this tower. Just make sure you get SFF brackets. Usually, the HDMI and DVI display ports are on the card and the VGA port is attached to the card with a ribbon cable and has it's own separate bracket. Sometimes when I'm buying used I'll get a large bracket that only fits in larger cases, so watch that you either get the SFF brackets with the card or order them separately (eBay or elsewhere).
@@castabouttv5129 Check the product description, photos, and perhaps message the seller to make sure. Google "low profile bracket" to get an idea of what it looks like. If you do have to buy one, they are around $5 CAD if shipping from China. Just may take a few weeks for delivery.
I bet it would work fine, but only low profile cards will fit in the case. You could migrate everything to a larger case or maybe run the PC with the lid removed or get some PCI extension cables and run the card outside of the case. If it needs a power plug from the PSU, you would need to get a different power supply (aka PSU) that supports that. Does that make sense?
Good question. I would have to look up the info. I am pretty sure it's the same motherboard that would be installed in the regular sized tower case version of the M91p. As for it being Micro, it doesn't seem to be much smaller than a standard sized system board. Are you looking to purchase or replace one?
hi,im planning to upgrade my m93p by using ssd as boot drive and the stock hdd as extra internal storage.is it posible?what about the power supply,its not going to be affected by the upgrade including the new graphics card im planning to install on?my m93p had quadcore,17 4th gen and 8gb ram.thank you
Yes, you can totally do that. The M93p is a similar PC compared to this M91p. If there is only one SATA power cable connected from the power supply to the stock HDD, then you can purchase a SATA power splitter, like what I used in this video. The power supply can handle this plus a low profile graphics card, similar to what I installed in this video. Search "SATA Y power splitter" on eBay and you'll find one. You'll need another SATA cable as well, to plug from the SSD to the motherboard. Both cables are cheap. What graphics card are you looking at installing? Good luck with the build, you should be all good to go once you get everything you need.
@@HaisteComputerRepair thanks bro.what graphics card would you recommend?that can handle only a light games?im just concern on the power supply cause somebody told me that m93 has a weak/small power supply.thanks again...
@@christiancaridad6816 I would bet the power supply is the same 240W found in this video, just perhaps in a different shape to fit the case. I think you will be fine. Of course, if you have the money to spend on a better SFF power supply then do it, but I have to assume you're working on a budget if you're upgrading an M93p, which is a good office PC. For low profile cards, you don't have to worry about plugging in a power cable from the power supply, as you would with higher tier cards. I would look for a 2GB DDR3 128-bit low profile card. Nvidia, AMD Radeon, EVGA, etc. The same card in this video, but 2GB instead of 1GB. I found a couple for around $50 or $60 CAD with shipping. 8GB RAM or more + SSD will be a pretty solid setup.
Yep, looks like this i7 and the i5 have the same socket type. i7: www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-2600%20CM8062300834302.html i5: www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-2400%20CM8062300834106.html The gtx 1050ti low profile would be an awesome upgrade with the i7. Just be mindful of what kind of load you will be putting on the system and power supply. You should be ok so long as you aren't pushing the limits too often.
An unexpected shutdown could be any number of reasons. I would recommend using event viewer by hitting the windows key, Type Event Viewer>Custom Views>Administrative events. Look for Critical errors and Google search the error codes.
If it is the Low Profile version of the card, yes. If the front I/O bracket on the card is taller than 3 inches, no, you will have to use a bigger case.
I've installed another 2x2gig modules of ram in the other slots and the system stays as a black screen, i think i might have defective ram slots sadly or im unsure, very helpful video though
Did you have two DIMM slots occupied with RAM already? What capacity and type/speed? It's possible the DIMM slot doesn't work, but also possible the RAM is faulty. Try installing one by one to see which one, if any, is dead.
@@HaisteComputerRepair I already had to DIMM's Occupied and i installed working modules into the slots and the system stayed black when they was installed, and I made sure to test both independently. by changing the current slots what worked
Yes, it can be migrated over to a different case. This video I shot shows an M91p migrated to a larger case, different PSU, and a USB 3.0 card. ruclips.net/video/cJKCKDo9_3w/видео.html
@@HaisteComputerRepair thank you very much for ur answer. 2h ago I helped my nephew over video call to make his computer m91p with new psu in new case working. he at first turned on psi-e 8 pin to cpu atx pin and cpu atx pin to gpu.... totally wrong! gladly nothing burned.... :D now hes pc working and he is glad af. ur videos helped me and him. tyvm
I believe that it would work with this system, however I question if it 1) will fit in a SFF (Small form factor) tower case. 2) requires a power plug from the power supply. In pictures I looked up, it appears to not have a power plug. The shape of the card leads me to think you will need a larger case. Or, you to pursue purchasing a "low profile" card that is designed to fit SFF tower cases.
@@HaisteComputerRepair Hello sir,do you think that the gtx 1050 ti low profile card would fit in this computer..well not fit but if it would be compatible?
@@blade2247 Yes, I believe it would work with this system. I haven't tried myself, but I have read on forums about other people using them with the M91p. forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/M91P-7033-WGM-GTX-1050-and-Gt-1030-Compatibility/m-p/3717961?page=1#3718037 That would be an excellent boost, I would love to try one out. If you're buying one, make sure there is a return policy. Or if it's used, good luck! Let me know how it goes.
An RX 5600 XT? Good question, I'm not sure. Correct me if I'm wrong, but you would first need to migrate everything to a larger tower or keep the sff and use one of those PCI ribbon extenders and fit the larger card in best you can manage. Also, a SATA power splitter to gain power from the PSU, am I right? Unless someone released a low profile version? I've never modded the id of a gpu, so I can't really be of much help. Let me know if you do find a solution, I would be curious to know.
@@HaisteComputerRepair yea i looked a lil more into it and you would need another pc in order to mod the id so that its within the m91p gpu whitelist :/ im broke n just wanted to get the most bang for my buck. $75 dollar m91p and $110 dollar radeon rx 560 i guess imma just buy the nvidia gt 1030
@@HaisteComputerRepairhi, I would play some older titles like gta 5, definitely some assassin's creed games like ac unity, ac 3, etc I have an youtube music channel so I would use it for making my beats and edit in photoshop, after effects and premiere pro. Thanks for responding!
@@lasoute Look up a GTX 1050ti Low profile Graphics Card and see what the prices look like. For used and new. As for an SSD, Any brand will do. Go for any capacity 2.5" SATA III SSD. The GPU will help a lot with gaming and editing. SSD will speed things up. What does your RAM look like? If a GTX 1050ti is too expensive, look up the GT 1030, though this would be less performance.
Thank you for this! I have an intel i3 version and planning to do an SSD and Ram upgrade. But I also am currently researching if I can or is it worth upgrading other parts like Power, fan or to i5.
Depending on your budget, perhaps SSD and RAM first to build up the foundation of your system. Upgrading to an i5 will really improve performance after that. You can find some good deals on eBay.
Hello man so i have a guestion for you i found a really good deal for this pc and i would like to know if PNY GeForce GTX 1650 Dual Fan will fit there and what's the size of the power supply thank you. :)
Power supply is 240W. This card? www.techpowerup.com/gpu-specs/msi-gtx-1650-low-profile.b7005 I believe this card would work. It would be an excellent boost to the system.
@@HaisteComputerRepair hello so that GPU is amazing but in my stupid country there is not even one store selling that gpu so is there any gpu like that one for the similar price.
@@timisasamis2465 If you go to the same link I left in the comment above, for the gtx 1650, scroll down and there is a fairly long list of equivalents or similar cards. Look for a low profile version if you are putting it in a SFF tower case, like the one in this video. Sounds like you might have to have one shipped to you?
@@senatorjack9758 It would really depend on what graphics card you wish to install. Maybe on low settings. What do you have in mind for GPU? Remember with the SFF case you are limited to low profile graphics cards.
Yep, that should be fine. The 1030 doesn't require a power plug and is rated at 30W maximum according to techpowerup: www.techpowerup.com/gpu-specs/geforce-gt-1030.c2954
@@aaronleonor1421 It's all good. Pcie 3.0 cards are compatible with 2.0 and vice versa. M91p is 2.0. I have installed a gtx 650 before after migrating to a larger case and installing a power supply capable of handling more.
Yep, like this: www.newegg.ca/p/1W7-005H-00005?item=9SIAD1N5PY4246&source=region&nm_mc=knc-googleadwordscamkpl-pc&cm_mmc=knc-googleadwordscamkpl-pc-_-pla-greennet-_-cables+-+internal+power+cables-_-9SIAD1N5PY4246&gclid=CjwKCAiAxp-ABhALEiwAXm6IyQBnF4vyBtdso04DMjT9D8n9uuHfVfUykbcHwvnX4x246QT5jR203BoCmZsQAvD_BwE I've found having right angle cables really helps with Small Form Factor cases.
@@HaisteComputerRepair another question, so my m91p came with a 1tb HDD so do I just use the connector already connected on that one and then the other part of the year splitter?
@@ethan1263 Yes. You remove the SATA power plug from the HDD and install the splitter. Then, you can power two drives. There are enough SATA ports on the motherboard to accommodate three drives including the optical drive.
Hey, i have Lenovo thinkcentre m83 i5 4th gen. There are 2 rams of each 2gb installed in dimm3 and dimm4, I brought 8gb ram and installed it in dimm1. Getting 3 beep and 1 long beep. Computer working good if i remove ram from dimm1 or dimm2, i switched the ram from dimm3, dimm4 to dimm1 and dimm2. But not working. How to enable dimm1 and dimm2
It's likely bad RAM if you are getting beeps. I know that isn't good news, but that might be it. Generally, there is an order to install RAM in the DIMM slots. Check out this manual: www.esm-computer.de/handbuch/M91p.pdf where it states on page 84 "Install memory modules in the sequence of DIMM 2, DIMM 4, DIMM 1, and DIMM 3. See "Locating parts on the system board” on page 77." Are you able to try the RAM out in a different tower? To verify they work?
@@HaisteComputerRepair unlikely you’ll see this but if you do is there enough room under the fan to fit a RAM stick with heat sync on top? Looking at Patriot Viper III, or Corsair vengeance LOW PROFILE. Going to fill 4 DIMMS of 4x8gb if room allows it in the Patriot as much cheaper. Thoughts?
@@user-n0tf0und. It might come in contact with the plastic piece around the fan+heatsink, but it's flexible plastic, so you might be able to just squeeze it in. I'm guessing the design is meant to redirect air flow as there is no rear exhaust fan aside from the power supply fan. You could always just take it off or modify it.
**GAMING QUESTION ANSWERED** for more tests (Fortnite @ 60fps) check out this video ruclips.net/video/_bYXp0aoQfE/видео.html made by @Sly_Botts, a commenter down below. His M91p setup is intuitive, budget friendly, and will give you an idea of game performance if your system is similar at all.
@Shepard Definitely has a fan. Is that what you are asking?
@Fzzyy You can, but it would have to be on lowest settings. A better graphics card would really help, especially if you play competitively at all.
Do you know whats the best graphics card this PC can take? And is this the same layout as a lenovo m81 sff? Because I really want to upgrade mine
@@alexzhang3836 The M81 looks similar to the M91p. What are the specs in your M81? The best graphics card I have heard someone installing in a similar model (M93p) is a GTX 1050 ti Low Profile. That would be a very nice upgrade. The M81 seems to have the same CPU Socket type as the M91p as well as similar RAM config. www.cnet.com/products/lenovo-thinkcentre-m81-sff-core-i5-2400-3-1-ghz-4-gb-250-gb/
@@HaisteComputerRepair thank you so much for replying so quick. I have 16 gbs of ram and an Intel i5 2400 at 3.1 GHz
Lenovo actually tested GTX 1050Ti low profiles on a lot of their sff machines.
If you're planning to game a lot, I'd recommend the low profile GTX 1050Ti otherwise you can get the GT 1030.
Absolutely agree. I had a couple geforce gt 210 cards lying around, so I thought they would be good enough to at least demonstrate how to install a card. They don't have a great benefit, though. I would have loved to test out a gt 1030. I have one or two coming my way now, but I don't have any more M91p's. M93p's I will have, though.
@Syaz
Is it the asus gtx 1050ti??
Thanks for the video.
For any fast moving game 25 to 30 frames per second are minimum, in my experience. Rather reduce settings to get the frame rate up.
The GT 210 I installed in this build is terrible for gaming. I should have mentioned that in the video! Definitely can install something much much better.
Sir plz upload the video Lenovo thinkcentre m90 small form factor ultra 2010 model plzzzzzzzzzzzzzzz
I actually just shot a video upgrading a ThinkCentre M90p. Same size tower case as in this video for the M91p. I will edit it and upload soon.
Great tutorial. One thing, though, there are SATA power splitters with right-angle/90-degree connections available, so you don't need to cut anything.
Thanks! You're right and I have since purchased some for other builds. Also, it bears repeating that the GT 210 is not a great choice ;)
Dumb question here?!?!?! If you would have had your sata cable and sata power splitter with 90 degree ends, would you still need to cut the metal leg off of the optical drive stand to make it fit? Looking at the 22:05 mark, you do not really mention it and it is hard to see clearly. Thanks again for the video. Lots of good info here for the budget minded.
Yep, that's right! I started ordering 90 degree cables so I don't have to modify cases so much.
@@HaisteComputerRepair Thanks again. I went ahead and ordered the 90 degree cables for my M93P build just to make sure.
@@tommydabney2291 Perfect. It's worth it. There are other SFF cases I have had to really squeeze cables into, so I am looking forward to the 90's!
Moving over from iMac. Got a M91 16gb ram/i5...etc. Fingers crossed. Just need to use F/book while having my bible program running (and some others). My iMac just couldn't pull the load! LOL...so I'm BACK to PC. Been 15 years or more. Didn't cost me much to purchase the M91 and it's twice the "power" the iMac has. Had major problems w/ Parallels. Over it. Thanks for the video as I orient myself back to PC.
I'm glad it helped! I think you will be just fine with that setup. Sounds solid to me. Even better if you also invest in an SSD.
@@HaisteComputerRepair Definitely getting an SSD. Thanks again!
@@buzulakd Very nice, have fun with it!
@@HaisteComputerRepair Well not having fun. How do I add wireless internet capability? Or I'll have to have like a 30ft. ethernet cord! HELP!!!
Hey thanks for the video man! I just bought this PC and it comes with a 250gb hdd with windows 10 installed. If I want to upgrade the storage to sdd or bigger hdd, is it possible to move my windows 10 onto the new one or do I need a new licence?
If you don't want to go through the process of cloning a drive: Is there a Win 7 Product Key somewhere on the case? If not, go here and scroll down to the "Method 2: Using Script" section. www.winhelponline.com/blog/view-your-product-key-windows-10-8-7-script/ You can retrieve the product key by creating a text document, copy+paste the script, and then save the file as "all files," name it what you want, and add the .vbs file extension. Use the example on the site.
@@HaisteComputerRepair thanks for getting back to me. Once it arrives I will look into it further.
@@danishhameed8799 No problem, let me know how it goes :)
I got an old lenovo think centre 7052 m91p with the same cpu i5 2400 3.1ghz. 4gb ddr3 1333mhz ram. I bought 12 more gb but haven't got it yet. I pulled out the drive bays and added a fan I took out of a dell optiplex 760. I had to rewire the fan because dell likes to be dell. I put a GT 1030 in it and an 850 evo ssd. it runs fortnite at 720p on high settings at 60 fps. Cpu idles at 33 to 35 degrees. I also swapped out the psw with a power color 600w with an intake and vent fan so there is good airflow in the chassis. I'll make a video.
Wow, that's pretty good performance. You should post a video and share it here. I'll link to it in my description. Many people ask about gaming performance and I have only tried so many games with so many hardware configurations, so your info is appreciated! Edit: I pinned this comment to the top of the thread.
@@HaisteComputerRepair I forgot to add that med settings for shadows though i think it still ran at 60fps. This is 720p though not 1080p at 1080 med settings most likely with shadows off or low. Bottom line, it plays esports titles fairly well, and on higher settings with 720p res
@@sly_botts1189 For sure, that makes sense. But, it's important to clarify.
@@HaisteComputerRepair I made a quick video today to show you what I did. I'm not a professional and I don't have good lighting or equipment but I did what I could. I also had issues with screen capturing so I used my camera. Here you go: ruclips.net/video/_bYXp0aoQfE/видео.html
@@sly_botts1189 The lighting in the video makes it look like you live in a cave! Kidding aside, I am going to pin this comment or post one of my own and include the link to your video. Thanks for making it, I will refer people to it as it comes up :) EDIT: linked your video as the top comment.
The HP SFF are very similar in price and performance and allow a 3.5" and 2.5" drives in proper bays, no metal snips required. I personally would take the optical drive out before doing dodgy stuff like zip ties and double sided tape.
I like Lenovo as a brand, but that generation computer, HP ( or even Dell ) are less problematic to uprade than Lenovo.
I actually have found that certain lines of Lenovo are the easiest to upgrade and modify. There aren't many proprietary things like power supply and fan connections. Dell was the worst for this in my experience. Of course, not all Dell PC's, but many. Lenovo business class are well built and user (and IT) friendly.
I bought a AMD Raden R7 series 250 with the same tower you have in this video for some reason it won’t read the card, do you know what I can do to get it to start reading it? Thanks if you can help.
Just to verify that you have it installed in the PCIx16 slot closest to the heatsink? Are you getting any display at all from the card? Check in BIOS to see which display is default or leave it alone if it is set to auto. Can you confirm that the card works, perhaps in another PC? Likewise, can you confirm that the PCI slot is good on your motherboard by testing another card or from previous use?
It’s getting power the fan is coming on. Yes, next to the heatsink. I’ve been messing with it trying everything. Frustrating. 😂
It don’t have another card, wish I did. I was wondering the same thing.
@@nathonkeesee4297 So it's getting power but no display? Did you check BIOS? You will have to plug into the display input on the motherboard I/O. Can you do that?
Hi. Made the same upgrades (without the graphics card) but now I'm having an issue:
desktop won't shutdown (only turns off screen) and can't awake from suspension... I've searched online and learned that disabling "fast boot" in energy options solved the shutdown issue, but won't awake from suspension... have all the right configs, mice and keyboard won't awake, only with power button but goes to win boot manager, gives an error and have to restart. tryed another clean install but won't work. any thoughts on this? I think that it's related to previous instalation was in Hdd legacy and this one has to be in UEFI due to SSD... Did you had any issues like that? thanks in advance.
I had that problem once with an HP Compaq 6005 Pro PC. I believe the problem was a display driver for Window 10. It was solved with the addition of a graphics card, but I believe the correct driver also solved the problem . try searching for the graphics driver on the M91p website. It would likely be a Win 7 driver.
what are the differences between this model and the M73 sff?
found a guy thats selling the M73 sff for around 100$ USD, had a i5 4690, 4gb of ram and a 500gb hard drive.
The difference would be that the M73 supports 4th gen Intel i5 while the M91p supports 2nd gen i5. As well, the integrated Intel HD 4400/4600 is better and there is USB 3.0 instead of just 2.0. $100 is not bad at all, you can easily upgrade to an SSD+HDD combo and get that RAM up to 8GB at least. Hit me up if you need help sourcing parts, I will likely have something in my shop or will help look up deals.
Hey man, great video, I have a m82 sff, 16gb ram DDR3, i7. I just bought the XFX Thicc II Pro AMD radeon RX5500 XT graphics cards and I was wondering about the capability of the card and the board. Will the GPU fit on the board if the whole thing was moved to a new PC case? Im worried about the proximity of the ram slots to where the board will be. Thanks
I'm not sure to be honest. Definitely take out the plastic piece around the CPU fan. Maybe it would sit right on top of the tabs for the RAM slots. Are you able to open up the tower case and take a look? Be mindful of needing a power supply that has an extra power plug for the card. Let me know if it does fit.
@@HaisteComputerRepair so yes my board matches the one in this video and I am aware and have a 500w PSu coming for this build.
So yes the issue is the size of this card and the possibility that it won’t fit due to the proximity of the Ram slots.
@@HaloProductionsUSA Yeah totally. Check out this page. It has the length and height dimensions, so you could go to the board and measure the approx area needed. www.techpowerup.com/gpu-specs/xfx-rx-5500-xt-thicc-ii-pro-8-gb.b7518
@@HaisteComputerRepair I actually tested it out on the board and it didn't fit. I ended up going with a shroud less Zotac 1660 Super Compact which should fit when specs and objective data is applied
@@HaloProductionsUSA Ok, bummer it didn't work out. Let me know how it goes with the Zotac
Awesome video. I just added a SSD to M series. I left the original HDD in and was going to clone from HDD to SDD. But they SSD is not showing up. Have both cables hooked up. Any help would be appreciated
Is the SSD not showing in Windows or BIOS? If you haven't checked in BIOS, navigate to Boot Options and check to see that the SSD is included in the Boot Order from all categories you are able to do so.
my m91p has intel core i3 2100. I bought it refurbished and I was noob at the time of buying.
Definitely a less powerful CPU, but there's always the option to upgrade :)
@@HaisteComputerRepair Thank you for replying. Can you tell me what CPU is compatible with the motherboard. I am still noob.
@@GaneshMKarhale If you compare your i3 here tinyurl.com/y63k9t7e with the i5 in the video tinyurl.com/y2l6zegr you'll see that they have the same socket type. I assume you will be able to use the i5 in this video, based on this. Which would be a good upgrade.
nice video.. can we upgrade processor from 2nd gen to 3rd Generation ?
Thanks! Unfortunately, no you can only upgrade to an i7-2600 CPU. 3rd Gen Intel came with the ThinkCentre M92p.
How to change Lenovo ThinkCentre M92p case to gaming case? what cable did you replace? thank you
Check out the case swap on this M93p. The process is near identical to an M92p ( just did an M92p case swap today). ruclips.net/video/xZ5ArnqXGzA/видео.html I'll have a more detailed video for my next upload.
i recently have gotten a gigabyte gt 1030 low profile graphics card. when i put the card into the slot and turn on my pc, the fan on the card turns on and all of that but the pc doesn’t pick up the card. i don’t know what to do and i think coming here and asking you might help
the specs are stock, core i5 (2nd gen) 2500, 8GB ram, 1tb ssd
is there a fix or something? hope there is. thank you
Some basic things you may have already tried:
1) This might sound like a silly question, but you for sure connected the display cable to the card? Each display port doesn't show anything on your monitor? Ex: you tried the HDMI and DVI and the both don't work?
2) Try manually selecting the display option on the monitor by pressing the source button (located on the monitor)
3) Try different display cables. Could be the one you're using isn't working.
4) Do you have another PC you can test the card in? Did you buy it brand new or used?
Let me know and we can dig deeper if needed.
Can I move this motherboard and its contents to a ATX tower? If so which would you recommend me? I'm looking for a gaming one
The last time I did this, I put everything into a Vista era Lenovo tower, as seen in this video: ruclips.net/video/cJKCKDo9_3w/видео.html
I'm certain you can move it into any case you like, just be aware of where certain components, like the front USB port board, can fit. Or, if you are planning to upgrade to a USB 3.0 board. Where would you put it (PCI slot? Is there room with the graphics card?). Do you plan to upgrade in the future? Maybe it's worth it to take a look at a budget case that would go well with a budget build, until you have enough money to contribute towards a powerful gaming build. Be sure to take lots of pictures so you remember where everything plugs in on the motherboard. As always, be sure to prepare yourself mentally for some troubleshooting in case you need to figure something out. I think I will make a pcpartpicker.com build page once I get the time to migrate one of my M91p's.
Would you recommend it to anyone who does architecture designs with software ?
Since I am not working within that realm, I would need some examples of software used
@@HaisteComputerRepair Revit 2024 BIM
Hi I just brought some upgrades for my m91p .. is there some way to save my files from current hard drive before installing new one?
Are you installing a new HDD or SSD with a fresh install of Windows? Or wishing to move (aka "clone") your current Windows setup to a new HDD or SSD? There are a few different things you can do. First, though, are you looking to back up both personal files and software? Ex: pictures, music, and Adobe Photoshop or MS Office 2019, etc, or, just personal files. If it's just personal files like pictures and music, you can backup to an external hard drive. With paid-for software, if you have product keys, you can likely download the programs again and resume using them. Free software you should be able to download again using the same information (email, username, password, etc) you originally used when you got it. In other words, you can install a fresh copy of Windows and then download and put whatever you want back to how you would like it, just like the first time you started using your PC. If you're looking to "clone" your HDD to a new SSD, there is software you can use that will do this for you. Cloning is taking your current Windows experience and putting it on a new drive. You will need to be able to connect your new HDD or SSD to your computer in order to clone from your current HDD. If you can answer these questions with some detail, we can go from there. Does that make sense?
So I got the PC originally from new egg refurbished with parts and OS already installed. But I wanted to upgrade my hard drive, ram,and Im also adding a graphics card (doesn't have one currently) so I want to know a way to get my current info on to new HDD. Don't have anything special personally on PC . Just a streaming rig but would like my programs and windows 10 but if there is no easy way to do that . How do go about getting windows on new HDD I can reinstall everything else worse case
@@darriusteeter Ok, so this is how you can install a new copy of Windows 10:
Is there a Windows 7 product key anywhere on the tower case? If not, there are two different ways to find your product key here: www.winhelponline.com/blog/view-your-product-key-windows-10-8-7-script/
Once you have the product key, you can download a copy of Windows 10 .iso here (click on download Tool Now): www.microsoft.com/en-ca/software-download/windows10
Make sure you have a usb stick with at least 6GB worth of space. Take everything off the usb stick you might need as it will be formatted in the process. Follow the directions on the Windows download tool, it's pretty easy.
Once you have the Win 10 .iso loaded on to the usb stick, install the new HDD in your tower, power on, hit the enter key at the ThinkCentre Logo, select the Boot Options from the menu, select the USB option, and the rest is straightforward. Remember to have that product key on hand as you will need it.
This is a better option than cloning. If you don't have anything to transfer over, do this. If for some reason you can't find your product key through these methods, let me know. I would assume that NewEgg would have installed a legit copy of Win 10.
Note: before installing Win 10 and while you are installing the new HDD, install the RAM and the Graphics Card as well. Then install Windows 10 as it will preload and install drivers for you. Once Win 10 is loaded, hit the Windows key, type updates, check for updates, download, and then restart. That should take care of the drivers for the graphics card and everything else.
So I did the powershell and it doesn't show the key in either spot
@@darriusteeter Ok, that's common for it not to show up in powershell or command prompt. Did you try method 2 with Notepad?
Would work a gt1030 low profile?
And what cable do you pluged in graphics card?
Yep, it would work. Nice match. It receives power through the motherboard, no extra cables from the power supply for this one.
Where do u get the small brackets or do they come with the card
If you buy new, the low profile brackets will come with the card. Used, you'll have to ask the seller. Otherwise, you can find them from eBay sellers, just search "low profile graphics card brackets" and find one that matches. Also, you could always cut and modify tall brackets with a pair of metal snips and pliers.
Hi, how is it going? I recently upgraded my lenovo thinkcentre m91p sff with a gt1030 and a 1tb ssd, and tried to restart my pc and delete everything, after a lot of hours have passed by, when selecting the language, my mouse and keyboard didnt work so i couldnt do anything, also ive tried a lot of solutions, but none worked. today i downlaoded a media creation tool on a usb and plugged it in my pc to install windows 10. i went threw all the installation process and all of that, but when it got to the final stage of finishing everything up, it says that a restart is needed so i restart and it goes again into the installation windows process, over ans over again. am i doing something wrong? i think not. could you please help, as you helped me in the past. i thank you a lot for everything. but could you please let me know any solutions for this?
If it keeps booting to the Windows install, have you tried removing the USB with Windows on it, after you have installed Windows? It sounds like the USB is in the top of the boot order, which you can change in BIOS
@@HaisteComputerRepair thanks haha, already figured it out! also gt 1030 was a good idea with i5 2400.
@@lasoute Awesome!
thanks for the video, i have m92p sff and i think it's the same.i planning to go with a gt 1030 is it aight?
For sure, that would be an awesome card to install. Of course, look for the low profile version and don't forget to make sure you get the low profile brackets to fit the small case.
Hello, I have the m91p desktop, I used an amd hd 6670 video card, replaced it with an rx550, but now the pc does not display the video, I already updated the bios and it did not help the card was tested on another pc and it worked only on the m91p that card no video, can i install different desktop bios like m92p or m93p?
Best bet would be to update the M91p BIOS. Are you still having this problem?
@@HaisteComputerRepair do you have link for bios?
@@vantom6194for firmware updates?
what ssd, ram, graphics card upgrades are need to play valorant in lenovo think centre m series? may i know the brands?
Any SATA 2 or SATA 3 Solid State Drive would work. Any SATA 2.5" or 3.5" hdd would work (SSD highly recommended). Look for any RAM that is DDR3 1600MHz. 1333MHz RAM would work as well. Look for 2GB or 4GB sticks to have either 8GB or 16GB installed. Preferably, all sticks will be the same make/model. Graphics cards, look out for a 1GB DDR5, such as the GT 730, or a 2GB DDR5 like the GT 1030. Do you have a ThinkCentre? If so, which one? I just put together a ThinkCentre M93p that could play Valorant well. Check out this video: ruclips.net/video/BderaGy5y4I/видео.html
how did you arrange the ssd and hdd both in one cabinet?
If you go to 18:44 during the Finish Install portion of the video, you'll see what I did. Hope that helps :)
Hey! What a nice video but can I change the pc case to bigger one?
For sure. You can migrate everything over to any larger case that matches the motherboard screw locations. Just be aware that you will have to customize and troubleshoot in the event something goes wrong. Ex: once, I migrated an M91p to a larger case and, for some reason, the CPU fan started running at max speed at all times. I ended up installing a fan with lower amperage.
no it’s illegal
Thanks sir 😊
Thanks for watching :)
Hi, I have installed an ssd earlier, I got the pc with windows 10 already installed to the hdd, I would like to know how to transfer the windows 10 to the ssd, so I can have my pc faster overall. Do you have like a tutorial or an article to share? Thank you!
Is this a Lenovo ThinkCentre M91p you have? If not, what do you have? If it is a ThinkCentre of this era, there should be a Windows 7 key you can use to activate Windows 10. So, with that in mind, you can do a fresh install onto the SSD and set up the HDD as storage, if you like. A fresh install is the best. If you really want to, you can also clone the HDD to the SSD with Macrium Cloning software. So, 1)do you have a Win 7 key on the tower? 2)Are you ok with doing a fresh install on to an SSD? (It's pretty easy). Let me know and we can go from there.
@@HaisteComputerRepair It's a ThinkCentre M91p. Yes, I'm okay with a fresh install, and yes I have a win7 key on the tower
question: is the ssd you put in there a 2.5 inch?
Yes it is :)
Why would you put the GeForce 210 in? It’s roughly as fast as the integrated graphics lmao
I know it's not really an upgrade unless you want HDMI. I should have made that clear, but I didn't really think about it at the time. It was just what I had lying around my shop. I've done a similar follow up with a GT710 (moderately better). And Some 4GB cards which are great. Consider it a how to install parts for someone trying to learn.
hey what bios version is this m91p running?
Sorry, this PC sold shortly after the video and I have no recollection!
I have the same model of CPU, which brand of GPU or model was used. I want to upgrade my GPU.thanks in advance
I installed a GT 210, but I do not recommended that card at all. If you are looking for Low Profile GPU: GT 1030 for budget, GTX 1050 little higher budget, GTX 1050 ti, and then GTX 1650.
Do you know if I can use a GT 1030 instead of the graphics card you used?
Yep, it should work. Like this one? www.techpowerup.com/gpu-specs/geforce-gt-1030.c2954
@@HaisteComputerRepair but my monitor doesn't have a DVI port only VGA can u recommend another graphics card?
Where did you buy the graphics card?
I bought this one from someone in Canada on Kijiji.ca. I've found that it really helps to stay on top of multiple buy and sell sites, eBay, etc, to find the deal. This was probably $50 CAD. Only really worth it for older towers.
Will gtx 750ti fit in it the card doesn't need power cable it's just works if you put it in it will it fits?
It should work just fine. Make sure you get the low profile option unless you have a larger tower case or plan to migrate everything from a SFF to larger tower case. Always expect some kind of troubleshooting, so maybe try to look up some info on other people installing the same thing.
Hi may ask this pc can install amd HD7470? Just bought this pc two weeks ago
I believe it should work, though I have never tried. It should. I have installed an AMD HD 6450 2GB card before, so AMD does work on M91p towers. You might have to configure graphics in BIOS. Is the 7470 something you want to try or is it a deal you are finding nearby?
Do we have to put back the lid on the CPU because I plan on putting a gtx 1050 ti low profile inside?
If you're just installing a low profile graphics card, you don't need to do anything with the CPU. There probably isn't any kind of lid on a CPU. Just the heat sink and a little lever contraption that holds it in place on the board. Does that help?
@@HaisteComputerRepair The 1050 ti Low Profile has measurements of H=30 L=172 W=113mm and the plastic black lid around the CPU cooler is in the way, so can I remove it and leave the cpu without it?
@@kluthai Oh, I see what you mean. The black plastic piece around the CPU fan? You can take it off, just make sure to monitor how hot the CPU gets with it missing. The fan will still blow air down through the heat sink, just the black plastic piece won't be there to help distribute air flow in the small case. Just so we're on the same page, only remove that black plastic, not the fan and heatsink below it.
@@HaisteComputerRepair YES THANK YOU!!
I'll keep a eye on it
Im gonna upgrade can u recommend cpu? (M91p)
Check out this page: www.cpu-world.com/Sockets/Socket%201155%20(LGA1155).html
Read the "Upgrading Socket 1155 Motherboards" section for how to look up compatibility for the large list. I would go for anything quad core and highest clock speed available. Maybe one of the i7 options.
Hi..mine 91p...plan to install graphic card, whats the recommended graphic card does 2G supported? I want to use current psu 240W...pls advise. Thanks
You could try looking for a GT 1030, GTX 1050, GTX 1050 ti, GTX 1650.
@@HaisteComputerRepair Hi thanks. No need to upgrade the psu? Sufficient to use the 240W and support those gpu...?
@@joeharyar9873 Yep, the low profile cards will be powered by the motherboard and only draw up to maybe 75W. No power connecter from the power supply is necessary, unless you case swap and install a full size video card.
@@HaisteComputerRepair Noted with thanks.
@@joeharyar9873 Let me know which one you try out.
hey man i just bought a LENOVO M91 SFF Desktop Computer, 3.4 GHz Intel Core i7 2600, 2 TB HDD, 16 GB DDR3. i need to upgrade the graphics card. what do you recommend?
I would look for a Low Profile 2GB DDR3 64-bit(or 128bit) Graphics card. Nvidia GeForce, AMD Radeon, EVGA, Zotac, etc. Any of those brands. Surf some buy and sell pages for a deal. Just like the one in this video, but 2GB instead of 1GB. Try to find one that has info on www.techpowerup.com. That site has information that is easy to read. Check out this one: www.techpowerup.com/gpu-specs/geforce-gt-710.c1990#:~:text=The%20GeForce%20GT%20710%20was,the%20card%20supports%20DirectX%2012.&text=GeForce%20GT%20710%20is%20connected,PCI%2DExpress%202.0%20x8%20interface.
@@HaisteComputerRepair hey man I don't know anything when it comes to these specs. would a EVGA GT 710 2GB DDR3 64-Bit Graphics Card, Single Slot, Low Profile fit?
@@castabouttv5129 Yes it would and that is an awesome fit for this tower. Just make sure you get SFF brackets. Usually, the HDMI and DVI display ports are on the card and the VGA port is attached to the card with a ribbon cable and has it's own separate bracket. Sometimes when I'm buying used I'll get a large bracket that only fits in larger cases, so watch that you either get the SFF brackets with the card or order them separately (eBay or elsewhere).
@@HaisteComputerRepair if i buy it on amazon would it come with the sff brackets do you think? i live in the middle of nowhere. not much used stuff
@@castabouttv5129 Check the product description, photos, and perhaps message the seller to make sure. Google "low profile bracket" to get an idea of what it looks like. If you do have to buy one, they are around $5 CAD if shipping from China. Just may take a few weeks for delivery.
Hi there, can EVGA Gtx 560 ti fit in there? And is it a good graphics card?
I bet it would work fine, but only low profile cards will fit in the case. You could migrate everything to a larger case or maybe run the PC with the lid removed or get some PCI extension cables and run the card outside of the case. If it needs a power plug from the PSU, you would need to get a different power supply (aka PSU) that supports that. Does that make sense?
@@HaisteComputerRepair Makes sense, thank you for replying
@@patrickgonzales3108 My pleasure :)
¿¿ the motherboard is atx or micro atx??
Good question. I would have to look up the info. I am pretty sure it's the same motherboard that would be installed in the regular sized tower case version of the M91p. As for it being Micro, it doesn't seem to be much smaller than a standard sized system board. Are you looking to purchase or replace one?
hi,im planning to upgrade my m93p by using ssd as boot drive and the stock hdd as extra internal storage.is it posible?what about the power supply,its not going to be affected by the upgrade including the new graphics card im planning to install on?my m93p had quadcore,17 4th gen and 8gb ram.thank you
Yes, you can totally do that. The M93p is a similar PC compared to this M91p. If there is only one SATA power cable connected from the power supply to the stock HDD, then you can purchase a SATA power splitter, like what I used in this video. The power supply can handle this plus a low profile graphics card, similar to what I installed in this video. Search "SATA Y power splitter" on eBay and you'll find one. You'll need another SATA cable as well, to plug from the SSD to the motherboard. Both cables are cheap.
What graphics card are you looking at installing? Good luck with the build, you should be all good to go once you get everything you need.
@@HaisteComputerRepair thanks bro.what graphics card would you recommend?that can handle only a light games?im just concern on the power supply cause somebody told me that m93 has a weak/small power supply.thanks again...
@@christiancaridad6816 I would bet the power supply is the same 240W found in this video, just perhaps in a different shape to fit the case. I think you will be fine. Of course, if you have the money to spend on a better SFF power supply then do it, but I have to assume you're working on a budget if you're upgrading an M93p, which is a good office PC. For low profile cards, you don't have to worry about plugging in a power cable from the power supply, as you would with higher tier cards. I would look for a 2GB DDR3 128-bit low profile card. Nvidia, AMD Radeon, EVGA, etc. The same card in this video, but 2GB instead of 1GB. I found a couple for around $50 or $60 CAD with shipping. 8GB RAM or more + SSD will be a pretty solid setup.
@@HaisteComputerRepair thanks bro...
@@christiancaridad6816 No problem. Good luck. Post here if you have some success.
CPU upgrade?
You could go up to the i7-2600 CPU
can i install a Intel Core I7-2600 and a graphic card GTX1050 Ti low profile?
Yep, looks like this i7 and the i5 have the same socket type. i7: www.cpu-world.com/CPUs/Core_i7/Intel-Core%20i7-2600%20CM8062300834302.html
i5: www.cpu-world.com/CPUs/Core_i5/Intel-Core%20i5-2400%20CM8062300834106.html
The gtx 1050ti low profile would be an awesome upgrade with the i7. Just be mindful of what kind of load you will be putting on the system and power supply. You should be ok so long as you aren't pushing the limits too often.
@@HaisteComputerRepair Ok,thank you for the advice
@@mcgino2025 You bet, let me know how it goes.
Could à gtx 660 fit in the case for m91?
So long as it is low profile. Unless you have the larger style tower case.
Will an RX 470 graphics card fit in this?
I believe it would work with this system, but you would need a low profile card to fit in the small form factor tower case.
I am from Egypt 🇪🇬 ,I want know why the desktop Suddenly rebootedand som one rob my prosser
An unexpected shutdown could be any number of reasons. I would recommend using event viewer by hitting the windows key, Type Event Viewer>Custom Views>Administrative events. Look for Critical errors and Google search the error codes.
Could 9800 gtx fit inside this pc?
If it is the Low Profile version of the card, yes. If the front I/O bracket on the card is taller than 3 inches, no, you will have to use a bigger case.
I've installed another 2x2gig modules of ram in the other slots and the system stays as a black screen, i think i might have defective ram slots sadly or im unsure, very helpful video though
Did you have two DIMM slots occupied with RAM already? What capacity and type/speed? It's possible the DIMM slot doesn't work, but also possible the RAM is faulty. Try installing one by one to see which one, if any, is dead.
@@HaisteComputerRepair I already had to DIMM's Occupied and i installed working modules into the slots and the system stayed black when they was installed, and I made sure to test both independently. by changing the current slots what worked
@@liamtilliam5866 Have you confirmed with one working stick that all four DIMM slots are not working? When is the last time the computer booted on?
@@HaisteComputerRepair Currently its only slots 1 and 3 that dont work 2 and 4 work fine
@@liamtilliam5866 Dang. Well, if you get 2 x 8GB DDR3 RAM sticks you can still run 16GB dual channel. That's not so bad.
Would a ZOTAC GeForce GT 710 2GB DDR3 work?
That card would be a great fit for this tower. Definitely :)
@@HaisteComputerRepair thanks for responding so quickly and thanks for the feedback :)
@@utopia2134 For sure. I would love to try out a 710. Let me know how it goes for you.
Hi. do anyone know if this PC m91p SFF can be put in new case and powered with different PSU than TFX?
Yes, it can be migrated over to a different case. This video I shot shows an M91p migrated to a larger case, different PSU, and a USB 3.0 card. ruclips.net/video/cJKCKDo9_3w/видео.html
@@HaisteComputerRepair thank you very much for ur answer. 2h ago I helped my nephew over video call to make his computer m91p with new psu in new case working. he at first turned on psi-e 8 pin to cpu atx pin and cpu atx pin to gpu.... totally wrong! gladly nothing burned.... :D now hes pc working and he is glad af. ur videos helped me and him. tyvm
@@Kiettax I'm happy to hear it's a success story :) Thanks for the feedback!
Can i put a 2tb hdd in this?
I don't see why not. The largest capacity I have installed is 1TB + 128GB SSD. I'd say go for it.
Is Palit Geforce GTX 1050 TI StormX Videocard 128bit PCIE DDR5 compatible with this?
I believe that it would work with this system, however I question if it 1) will fit in a SFF (Small form factor) tower case. 2) requires a power plug from the power supply.
In pictures I looked up, it appears to not have a power plug. The shape of the card leads me to think you will need a larger case. Or, you to pursue purchasing a "low profile" card that is designed to fit SFF tower cases.
@@HaisteComputerRepair thanks sir
@@gigantoneaiceg.1639 No problem!
@@HaisteComputerRepair Hello sir,do you think that the gtx 1050 ti low profile card would fit in this computer..well not fit but if it would be compatible?
@@blade2247 Yes, I believe it would work with this system. I haven't tried myself, but I have read on forums about other people using them with the M91p. forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/M91P-7033-WGM-GTX-1050-and-Gt-1030-Compatibility/m-p/3717961?page=1#3718037 That would be an excellent boost, I would love to try one out. If you're buying one, make sure there is a return policy. Or if it's used, good luck! Let me know how it goes.
can you mod the id of rx 560 so that it'll run with the m91p gpu whitelist?
An RX 5600 XT? Good question, I'm not sure. Correct me if I'm wrong, but you would first need to migrate everything to a larger tower or keep the sff and use one of those PCI ribbon extenders and fit the larger card in best you can manage. Also, a SATA power splitter to gain power from the PSU, am I right? Unless someone released a low profile version? I've never modded the id of a gpu, so I can't really be of much help. Let me know if you do find a solution, I would be curious to know.
@@HaisteComputerRepair yea i looked a lil more into it and you would need another pc in order to mod the id so that its within the m91p gpu whitelist :/ im broke n just wanted to get the most bang for my buck. $75 dollar m91p and $110 dollar radeon rx 560
i guess imma just buy the nvidia gt 1030
@@armandoguerrero7895 Hey, that's still under $200. Not bad. Good luck!
@@HaisteComputerRepair thanks, we all gotta start somewhere haha
@@armandoguerrero7895 That's right! Your next one will be even better I'm sure
Hello, again! Can you please reommand some ssd's for this machine and a power supply, i really want to upgrade it!
thanks again.
Can you tell me what you plan to use it for after upgrading? Let's start there.
@@HaisteComputerRepairhi, I would play some older titles like gta 5, definitely some assassin's creed games like ac unity, ac 3, etc I have an youtube music channel so I would use it for making my beats and edit in photoshop, after effects and premiere pro. Thanks for responding!
@@lasoute Ok, a graphics card will really help. What kind of budget do you have?
@@HaisteComputerRepair i'll pay a maximum of 200€
@@lasoute Look up a GTX 1050ti Low profile Graphics Card and see what the prices look like. For used and new. As for an SSD, Any brand will do. Go for any capacity 2.5" SATA III SSD. The GPU will help a lot with gaming and editing. SSD will speed things up. What does your RAM look like? If a GTX 1050ti is too expensive, look up the GT 1030, though this would be less performance.
Thank you for this! I have an intel i3 version and planning to do an SSD and Ram upgrade. But I also am currently researching if I can or is it worth upgrading other parts like Power, fan or to i5.
Depending on your budget, perhaps SSD and RAM first to build up the foundation of your system. Upgrading to an i5 will really improve performance after that. You can find some good deals on eBay.
@@HaisteComputerRepair I see, thanks!
@@allydaquipil No problem, let me know if you need any ideas or support.
Hello man so i have a guestion for you i found a really good deal for this pc and i would like to know if PNY GeForce GTX 1650 Dual Fan will fit there and what's the size of the power supply thank you. :)
Power supply is 240W. This card? www.techpowerup.com/gpu-specs/msi-gtx-1650-low-profile.b7005
I believe this card would work. It would be an excellent boost to the system.
@@HaisteComputerRepair ok thank you
@@HaisteComputerRepair hello so that GPU is amazing but in my stupid country there is not even one store selling that gpu so is there any gpu like that one for the similar price.
@@timisasamis2465 If you go to the same link I left in the comment above, for the gtx 1650, scroll down and there is a fairly long list of equivalents or similar cards. Look for a low profile version if you are putting it in a SFF tower case, like the one in this video. Sounds like you might have to have one shipped to you?
@@HaisteComputerRepair allright thanks man i'll check it out
This vga low profile ?
Yes, if you install a graphics card or anything into the PCI slot, it will need to be low profile and have low profile brackets.
@@HaisteComputerRepair Can I use a regular VGA? I will replace the case
@@lynxsana4935 Yep, just follow a video like this as a guide. I haven't shot one yet myself. ruclips.net/video/L4PPd5hnAok/видео.html
Does this support the Kingston ddr4 hyperx fury 16gb dual channel????
This is only 2nd gen Intel, so you are looking at DDR3 1333MHz RAM. DDR4 did not come until the 6th gen of Intel CPU's.
@@HaisteComputerRepair btw last question does it work with the i5 3570 on the lenovo thinkcentre m91p?
@@senatorjack9758 The M91p is only 2nd gen Intel. The M92p is 3rd gen, which shipped with the i5-3570.
@@HaisteComputerRepair and is warzone payable in this pc?
@@senatorjack9758 It would really depend on what graphics card you wish to install. Maybe on low settings. What do you have in mind for GPU? Remember with the SFF case you are limited to low profile graphics cards.
Sir pls run gta5 and csgo in Lenovo thinkcenter m90 😊pls sir
If you want to play those games, I would get a graphics card. At least a GT 1030, but up to a GTX 1050 or 1650. These are low profile options.
Yes sir pls
can i put gt 1030 in it ddr5 without changing the PSU?
Yep, that should be fine. The 1030 doesn't require a power plug and is rated at 30W maximum according to techpowerup: www.techpowerup.com/gpu-specs/geforce-gt-1030.c2954
@@HaisteComputerRepair TNX i been researching for a day THANKYOU very much
@@aaronleonor1421 Happy to help! I know that troubleshooting can be a major time suck, so whatever gets you to the next step is great.
@@HaisteComputerRepair can i put a gpu with pcie 3.0 in it?
i dont really know if i have 2.0 or 3.0 slot im really sorry for asking so many question
@@aaronleonor1421 It's all good. Pcie 3.0 cards are compatible with 2.0 and vice versa. M91p is 2.0. I have installed a gtx 650 before after migrating to a larger case and installing a power supply capable of handling more.
I want you to do this to my computer
Ship it to me and I will :) What are you running right now for hardware?
Sir pls run gta 5 and csgo❤ pls sir
Yes, but with the minimum of something like a GT 1030
Up
Up?
@@HaisteComputerRepair Sign of respect to your legit video
@@extendedgeorge8788 Thank you my friend!
@@HaisteComputerRepair keep it up 😊
so to be clear for the ssd I need a y splitter sata cable and an extra sata connector and I'll be set
Yep, like this: www.newegg.ca/p/1W7-005H-00005?item=9SIAD1N5PY4246&source=region&nm_mc=knc-googleadwordscamkpl-pc&cm_mmc=knc-googleadwordscamkpl-pc-_-pla-greennet-_-cables+-+internal+power+cables-_-9SIAD1N5PY4246&gclid=CjwKCAiAxp-ABhALEiwAXm6IyQBnF4vyBtdso04DMjT9D8n9uuHfVfUykbcHwvnX4x246QT5jR203BoCmZsQAvD_BwE
I've found having right angle cables really helps with Small Form Factor cases.
@@HaisteComputerRepair another question, so my m91p came with a 1tb HDD so do I just use the connector already connected on that one and then the other part of the year splitter?
@@HaisteComputerRepair y splitter*
@@ethan1263 Yes. You remove the SATA power plug from the HDD and install the splitter. Then, you can power two drives. There are enough SATA ports on the motherboard to accommodate three drives including the optical drive.
Hey, i have Lenovo thinkcentre m83 i5 4th gen. There are 2 rams of each 2gb installed in dimm3 and dimm4,
I brought 8gb ram and installed it in dimm1. Getting 3 beep and 1 long beep.
Computer working good if i remove ram from dimm1 or dimm2, i switched the ram from dimm3, dimm4 to dimm1 and dimm2. But not working. How to enable dimm1 and dimm2
It's likely bad RAM if you are getting beeps. I know that isn't good news, but that might be it. Generally, there is an order to install RAM in the DIMM slots. Check out this manual: www.esm-computer.de/handbuch/M91p.pdf where it states on page 84 "Install memory modules in the sequence of DIMM 2, DIMM 4, DIMM 1, and DIMM 3. See "Locating
parts on the system board” on page 77."
Are you able to try the RAM out in a different tower? To verify they work?
@@HaisteComputerRepair unlikely you’ll see this but if you do is there enough room under the fan to fit a RAM stick with heat sync on top? Looking at Patriot Viper III, or Corsair vengeance LOW PROFILE. Going to fill 4 DIMMS of 4x8gb if room allows it in the Patriot as much cheaper. Thoughts?
@@user-n0tf0und. It might come in contact with the plastic piece around the fan+heatsink, but it's flexible plastic, so you might be able to just squeeze it in. I'm guessing the design is meant to redirect air flow as there is no rear exhaust fan aside from the power supply fan. You could always just take it off or modify it.