Don’t know if you’re still responding to comments this late but could you give me a quick run down of the tools required to do the steps in this video and the part 2 version? (Not counting the parts)
#0 or #1 Phillips screwdriver, small flathead large flathead, Dremel with grinding head or sander, scissors, flush cutting snips, ultrafine sharpie, calipers, super glue www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
@@engineerable I thought that too but they been soaking for a good 4 days. Do you not have that problem? If you shoot 1 round then point the gun down the ball rolls out.
@@engineerable that's definitely a possibility. I soaked in a warm water seems to make a difference. I never would have gussed! Thanks for they reply btw!
I was thinking of adding a ASG Airsoft 35k short type motor in my srb400. It looks like the Splatrball guns use Airsoft short type motors so do you think this motor would work as an upgrade?
@@engineerable Thanks, wanted to know that before I buy the parts. Also, I was planning on using all of the metal parts you use in the video so the gun should work fine(:
@@engineerable think you’ll do a video if so think you could do it in a pulsar hydro strike or if you think it’ll be similar then either one just tryna do a custom sleeper build in one lmk
can i only replace the spring and nothing else? also will upgrading the battery to a 11.1v 2000mah battery will it be a bad decision to do that without upgrading to metal gears?
@@Ramsesperezmarte It's the same gearbox, so follow these directions for taking the SRB1200 apart ruclips.net/video/FKxPLUxrIpM/видео.html And then use the SRB400 metal gear upgrade instructions. Links for products are here: www.engineerable.com/single-post/upgrade-splatrball-srb400-to-metal-gears-and-stronger-spring-for-higher-fps-to-shoot-faster-harder
question. hope you answer. can i just upgrade the gears to metal? and not touch anything else? i want an 11.1 batter to make it faster without stripping gears. and do i have to upgrade the pinion gear? Thanks!
You have to do everything in the video. Replace the piston with metal gear rack also to match the metal gears, shim the piston diameter, replace pinion gear, etc
Use a belt sander or Dremel tool to grind off the teeth. I will upload the sector chip design, and you can also buy some from airsoft places like EVIKE. I will provide a link.
I've added a section to this page about the sector delay chip. You can download the file I made and 3D print, or you can buy one from EVIKE: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
i am looking into buying a 11.1 volt battery so would it all work the same just if i only change the gears and the things that it needs to change the gears like the ratchet pawl
have you done one of these for the pulsar pro? i just bought one and i’m seeing a lot of people sayinf their gears are stripped so i want to be prepared for when it happens to mine 😓
Also, this video will help you properly tune your motor engagement to prevent stripped gears. ruclips.net/video/Bzmw8frmtCk/видео.html If your gears do strip, sometimes you can use the adjustment screw to re engage the gears
@@sheldonpinoy2212 That's the air nozzle. Common cause of that not moving back far enough is that either the tappet plate is not hooked onto it in the correct place, or the tappet plate is bent and needs to be straightened
I’m not sure if your still answering but… when I popped the plastic where the gears are the shims came off and I need to know how many goes on each one. And the piston head do I have to cut that one part off seems like it fits I didn’t put it fully back on tho. I’m also trying to find a better motor that will increase the speed and hit harder if you know one please tell me. You said that metal rail likes to bend where can I find one that’s sturdier?
Watch the video to see where the shims go. I also have another video that's just a teardown and reassembly. Better motor will require metal gears. Faster motor that can take higher voltage increases the rate of fire. A motor with more torque can compress a stronger spring for higher FPS. TBH, at that point, buy a better blaster in the $150+ range that is already upgraded, and can be more easily upgraded further. Check this list here: www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
Ya my tappet plate just broke right where u said the bend was I ordered a so-called better one that’s plastic idk if it’s better but I’ll give it a shot
All parts links are here: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works That link is in the description.
TBH, if you want a good blaster, just buy one of these $125+ blasters from this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023.
@@jacebond8155 links in description, also here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Links in description and here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
hope you can answer my question, the piston head that you linked in your engineerable link is out of stock, where is another place i can buy a good piston head.
im only planning to add metal gears and the latch plus the secter chip, without doing anythjng to the piston. Should the gears be 18 to 1 that fits in a v2 v3 box? because idk which is which in geats
Yes, 18-1. You can't use the original piston, because the plastic pickup gear is oversized, the remaining gear teeth on the rack won't mesh correctly with the metal gears.
Hey the Gelbee storm burst glow is on sale for $40 right now. I know its not on your 2024 best list, but would you recommend it for $40? Thank you and i love your content!
In theory, Pulsar Pro uses the same gears and piston plunger as airsoft. However, I haven't taken mine apart yet to determine whether that will work, or there's something F'd up like the non-standard piston size of the Splatrball. I will be doing it soon, so stay tuned.
No piston will fit without adding a plastic piece on top. Some one in Australia commented on a brand that worked, but they won't ship outside of Aus. They used a non-standard piston size.
idk if u still answer but will this work on a pulsar pro or if not can u help i wanna add a better spring to my pulsar pro and u said it would need metal gear in order to not be stripped so how do i add metal gears
Here's all the details www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
is this gearbox aligned with the proportions of a v2 airsoft gearbox? if so then i might js put a mosfet and some 12:1 gears with a 40k motor. that would prolly give me a good 60rps.
Metal gears and better spring everything that would make the internals of the srb400 last long and have better fps and will not strip with a 11.1v battery id really appreciate it
$50-$75 all the details are here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Thank you! One more question, I was on the website and read a little of the text, but if I want to use a 11.1v battery do I have to upgrade the gear box too or just the gears/ metal gears.
@@zapponpc2965 TBH, the cost of doing all those upgrades with the stock non-standard gearbox is not worth it when you can buy a much better blaster for the same cost. Check out the gel blasters between $100 and $150 www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
I watched the whole video and it seems like a process to upgrade the SRB blaster. I just like the simplistic look and design of the SRB400, I looked at the other blasters that you linked, which I liked, but I don’t like the design very much, the blaster looks too real!
@@zapponpc2965 Agreed, but it would be time better spent to get the higher quality blaster and downgrade the appearance. 3D print mods to change the appearance to less realistic.
You have to buy the whole V3 spring set, that includes all the gearbox springs. Link is on this page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Sorry, you'd be able to buy a top of the line blaster for what I'd need to charge to upgrade these. Check this list and buy something in the $125+ category that's already upgraded. www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
$50-$75 All the details are here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Does this end up working? Ima go ahead and order these parts. The lightening blister is literally the same stuff. There are some differences seems like the splattr has some better parts
@@engineerable been looking at some complete builds.. is the G36C / G36 the most compatible for plug and play? And if I were to buy an airsoft gear box. The only thing that would need to be replaced is the nozzle? Needs to be longer right?
@@TreYay83 Lightning Blaster is straight up WELLS G36c with added lights. I need to do some of the metal gearbox mods first before I can comment on what all is needed
@@engineerable ya, there has been a bunch of these guns made it seems. Wells has even put out different variations of this gun. First being black, then a gray/blue one, and now this translucent green/orange. It also seems that any v3 gearbox should work. I'm a noob at this but I'm understanding more and more each day
@@TreYay83 I assume you have seen this version comparison then? forum.gelblasterforum.com/t/wells-g36c-version-confusion/9824/2 Based on that, this looks like a hybrid. It has the 370 motor of the V2 (smaller than Splatrball), but the electric mag of the V3
Don’t know if you’re still responding to comments this late but could you give me a quick run down of the tools required to do the steps in this video and the part 2 version? (Not counting the parts)
#0 or #1 Phillips screwdriver, small flathead large flathead, Dremel with grinding head or sander, scissors, flush cutting snips, ultrafine sharpie, calipers, super glue www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
@@engineerablecan you sell it to me
So is there a way I could make the 14 tooth piston to work?
Whats everything i have to upgrade for only an 11.1v battery
We’re should I get the metal gears from because rocket looks sketchy
amazon
Am I still able to put metal gears and a 11.1 volt battery
Do you need to do all of this to use the 11.1 battery without your gun breaking
@@saucy7909 most definitely
Can you put the list of metal gears porfavor
Can you put where you got them in the description 😊
Could we get links to every part you got?
Can I just change the spring and will still up the fps?
For a short period of time, before the plastic gears strip...
Anything to do to keep the balls from coming out when point the gun downward? And what's the difference in the 400 and the 400s?
If the balls roll out, then they have not grown large enough. Let them soak longer.
@@engineerable I thought that too but they been soaking for a good 4 days. Do you not have that problem? If you shoot 1 round then point the gun down the ball rolls out.
@@MrPlumloko No, they don't roll out when the right size. It could have to do with the type of water (hard?) where it doesn't absorb enough water.
@@engineerable that's definitely a possibility. I soaked in a warm water seems to make a difference. I never would have gussed! Thanks for they reply btw!
Can you do it for me?
bro learn.
bro are you serious
@@johnshedIetskywhy yall made when he asking a question?😂
i can
@@bmxjayzbecause he watched a video on how to do it but he still wont do it
can i just reinstall the metal gears do i have to upgrade anything else?
This video and the next one ruclips.net/video/lKiQMAdOd2E/видео.html will answer your question.
I was thinking of adding a ASG Airsoft 35k short type motor in my srb400. It looks like the Splatrball guns use Airsoft short type motors so do you think this motor would work as an upgrade?
Yep, it's just a short D shaft airsoft motor. Not sure if the plastic gears will handle the upgraded motor though...
@@engineerable Thanks, wanted to know that before I buy the parts. Also, I was planning on using all of the metal parts you use in the video so the gun should work fine(:
Think that there is a metal or nylon gearbox replacement that will fit in them?
Yes, a V3 airsoft gearbox will fit, but requires some small modifications.
@@engineerable think you’ll do a video if so think you could do it in a pulsar hydro strike or if you think it’ll be similar then either one just tryna do a custom sleeper build in one lmk
Is it possible to get metal gears on the Hydro Strike Pulsar Pro?
Well, obviously, but I mean, as like the gears and pistons are they similar and can I just go by this video for my pulsar
@@whatthefunyunsyes
can i only replace the spring and nothing else? also will upgrading the battery to a 11.1v 2000mah battery will it be a bad decision to do that without upgrading to metal gears?
Did you upgrade the battery? Did it increase the power/FPS? Any problems with it? Thanks!
Can you do this for the srb1200 and put the links for the products you need?
@@Ramsesperezmarte It's the same gearbox, so follow these directions for taking the SRB1200 apart ruclips.net/video/FKxPLUxrIpM/видео.html
And then use the SRB400 metal gear upgrade instructions. Links for products are here: www.engineerable.com/single-post/upgrade-splatrball-srb400-to-metal-gears-and-stronger-spring-for-higher-fps-to-shoot-faster-harder
@@engineerable ok thanks
If i do these upgrades on an srb1200 will i still need to modify the piston plunger to fit
@@mynameissean999 yes, it's the same gearbox
Where do i find the pinion gear
Just bought an SRB400 (orange), it is also missing the set screw so it is not dependent on which mode you get!
Seems random, some do, some don't
Do you know where I get that piece of plastic to put over the
Piston it would really help me and really be appreciated
@@Yvlxavier link in description
Where can I buy those Little bearing and white pieces that hold the gears in?
question. hope you answer. can i just upgrade the gears to metal? and not touch anything else? i want an 11.1 batter to make it faster without stripping gears. and do i have to upgrade the pinion gear? Thanks!
@engineerable
You have to do everything in the video. Replace the piston with metal gear rack also to match the metal gears, shim the piston diameter, replace pinion gear, etc
Did you upgrade the battery in yours? Did it make it more powerful? Any problems?
How do you remove and grind down the gear? And what do we use for a sector chip?
Use a belt sander or Dremel tool to grind off the teeth. I will upload the sector chip design, and you can also buy some from airsoft places like EVIKE. I will provide a link.
I've added a section to this page about the sector delay chip. You can download the file I made and 3D print, or you can buy one from EVIKE: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Belt sander cheeper grinder with flap disk helps keep the heat out of the parts
do you know any gearboxes that can fit the xshot hpg700 or what size gears they take?
What size shims did you use it didn’t say it in the video
i am looking into buying a 11.1 volt battery so would it all work the same just if i only change the gears and the things that it needs to change the gears like the
ratchet pawl
The gears will eat through the nylon piston
What are some other anti reverse latches that would work, the linked one is sold out and has been for a while
Any airsoft anti reverse will work, although it doesn't need to be replaced. The plastic one will continue to work fine even with metal gears.
Sweet, thanks man 👍
thanks for the tutorial but it just feels like it won’t work with my luck or I won’t be able to get the parts
Facts 😢😂
Wait so if put a 11.1volt battery can I just change the gears in it or will it still break if I won't do the rest of the stuff
Stock Gel blaster will run fine on 11v
have you done one of these for the pulsar pro? i just bought one and i’m seeing a lot of people sayinf their gears are stripped so i want to be prepared for when it happens to mine 😓
Not yet, but working on it. Stay tuned!
@@engineerable thank you so much!!
Also, this video will help you properly tune your motor engagement to prevent stripped gears. ruclips.net/video/Bzmw8frmtCk/видео.html
If your gears do strip, sometimes you can use the adjustment screw to re engage the gears
Wre I can buy that thing
Can I just upgrade the gears and be fine with it?
@@DevonVonn watch the video, it answers your question
Is all this the same on the pulsar pro and if it’s not can you make a video For that
Do I have to do the piston upgrade
@@Nickkey333 yes, watch the full video and you'll see why.
Hi i was wondering if you knew how to fix the piston thing not going back enough?
Piston thing?
@@engineerable the thing that ejects the gelballs
@@sheldonpinoy2212 That's the air nozzle. Common cause of that not moving back far enough is that either the tappet plate is not hooked onto it in the correct place, or the tappet plate is bent and needs to be straightened
@@engineerable can you make a video on how to fix it?
Where can I get a new tapped plate? Mine broke
I’m not sure if your still answering but… when I popped the plastic where the gears are the shims came off and I need to know how many goes on each one. And the piston head do I have to cut that one part off seems like it fits I didn’t put it fully back on tho. I’m also trying to find a better motor that will increase the speed and hit harder if you know one please tell me. You said that metal rail likes to bend where can I find one that’s sturdier?
Watch the video to see where the shims go. I also have another video that's just a teardown and reassembly. Better motor will require metal gears. Faster motor that can take higher voltage increases the rate of fire. A motor with more torque can compress a stronger spring for higher FPS. TBH, at that point, buy a better blaster in the $150+ range that is already upgraded, and can be more easily upgraded further. Check this list here: www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
Can i only change the gears or do i have to change everything else?
@@iksrammarski the video explains why you can't just change the gears. Also metal gears will quickly wear out a plastic piston rack.
@@engineerable okay thank you for answering
Would i be fine just using 11.1v batteries and metal gears and the metal d pin
For a while at least. 11.1V will reduce the life of other things, like the switch and motor.
what is the max battery i can use with the stock battery
7.4V if you go to 11.1V it may burn stuff up quick
Did you upgrade the battery in yours? Did it make it more powerful? Any problems?
Hey, I was just wondering if you could make a video on the srb 375 because the gears are different and smaller. Thanks
Unfortunately the SRB375 does not have replacement gears since it doesn't use airsoft standard parts.
Ya my tappet plate just broke right where u said the bend was I ordered a so-called better one that’s plastic idk if it’s better but I’ll give it a shot
Where did you buy the gears I can’t find them anywhere
All parts links are here: www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
That link is in the description.
Where can I get a plastic tube to glue on the 15 tooth
Links in description
mine didnt come with a set screw
Is it mandatory to use a new piston
Yes, I show why in the video
Do i have to do all of this or can i just put in metal gears to replace my striped plastic ones
What sized pinion gear was it
@@jacebond8155 the pinion gears only come in one size. This one is for D shaped shaft
If I wanted to add a higher speed motor where would I buy that
a nice place is akgelblasters and they also have really nice guns but it’s expensive
what’s the best metal gears
SHS brand
If I just want the metal gears do I still need to get everything else
You need all the parts. The stock plunger is not compatible with the metal gears.
TBH, if you want a good blaster, just buy one of these $125+ blasters from this list www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023.
Can I just use metal gears or do I need all that stuff
I wouldn't have done all that stuff if all we needed was metal gears...
@@engineerable ohhhh ok ty you should really start selling them
@@engineerable and how much money was the total cost without the gun
@@engineerable so does that mean I have to buy the stuff or not
I’m sorry I’m kind of dumb
Sorry about being late but how much do you need to upgrade for your gun to be able to use a 11.1v battery without the gun breaking
Metal gears and new piston body and piston head
please tell me what to do if my tapet plate breaks
Check this page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Where do I buy the metal gears
@@jacebond8155 links in description, also here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
do all of their blasters use the same gearbox?
Only the 400 and 1200 use the same gearbox. The 375 uses something different that can really be repaired.
I can’t find the link for the gears does anyone know where they are
Links in description and here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Where do you find all of the materials I search up metal gear box for Srb 400 and nothing came up, also does this work on a srb 400 sub
@@VinceTomassetti links in description
do u need the secter delay chip with the metal gears
Yes, otherwise the timing will be incorrect.
@@engineerable random question, you think u could put a airsoft v3 gearbox in the srb400?
@@alto9467 Yes, but you need to swap out the piston head, nozzle, tappet plate and sector delay.
hope you can answer my question, the piston head that you linked in your engineerable link is out of stock, where is another place i can buy a good piston head.
i got mine off of Atlanta airsoft it is blue and the end is flat
im only planning to add metal gears and the latch plus the secter chip, without doing anythjng to the piston. Should the gears be 18 to 1 that fits in a v2 v3 box? because idk which is which in geats
Yes, 18-1. You can't use the original piston, because the plastic pickup gear is oversized, the remaining gear teeth on the rack won't mesh correctly with the metal gears.
What did you end up doing which sector chip did you use and what box v2 or v3, did it fit good or was there a space like in the video?
Hey the Gelbee storm burst glow is on sale for $40 right now. I know its not on your 2024 best list, but would you recommend it for $40? Thank you and i love your content!
hi i don’t if your gonna answer but do you think you could do it for me cause i am not really good at stuff like this it would help alot if you could
If i wanted to do a full motor upgrade any good options?
I'll be doing some full metal gearbox + motor upgrades. Stay tuned!
can you use other lube instead?
Wdym bro😂😂
Can I throw in a 13:1 gearset?
Yes you can
Would these work with pulsar pro? My gears are stripped need upgrade metal not sure what would work.
In theory, Pulsar Pro uses the same gears and piston plunger as airsoft. However, I haven't taken mine apart yet to determine whether that will work, or there's something F'd up like the non-standard piston size of the Splatrball. I will be doing it soon, so stay tuned.
Where can I buy these upgrades?
www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
what piston fits the gearbox without the plastic on top? any link that i can buy form canada?
No piston will fit without adding a plastic piece on top. Some one in Australia commented on a brand that worked, but they won't ship outside of Aus. They used a non-standard piston size.
idk if u still answer but will this work on a pulsar pro or if not can u help i wanna add a better spring to my pulsar pro and u said it would need metal gear in order to not be stripped so how do i add metal gears
can this work on a unlocx
UNLOCX has a V2 style airsoft gearbox, and the gears and piston should be compatible. It's probably an easier mod than the Splatrball
How much will it cost if you install the parts your self? On my srb1200?
Sorry, I only make the tutorials, I don't service these for others.
@@engineerable that’s fine. Can you list the parts so I can look it up together?
Kinda thought you forgot about us lol I’m playing great vid can’t wait for part 2
Part 2 is here ruclips.net/video/lKiQMAdOd2E/видео.html
so would i be able to just upgrade to metal gears without having to upgrade anything else?
I might try an X -ring for less friction.
tracers hopfully coming soon?
Yes, still working on that video
Can I just replace the gears with metal ones or do I need to do the other upgrades with the spring and motor to keep up with the new gears
You can just replace the gears. I did not replace the motor either.
What if I have a 11v
They changed the wires and motor on the newer ones I have 3 if you want one
Interesting. Shoot me an email. You have any pics of the changes? info@engineerable.com
@@engineerable will do
Idk if you'll read this but can you please give me the links to all the mods cause I cant find the brands
Here's all the details www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
does this affect how much the gel balls hurt ?
Increasing FPS does make the gel balls hit harder, and travel further.
is this gearbox aligned with the proportions of a v2 airsoft gearbox? if so then i might js put a mosfet and some 12:1 gears with a 40k motor. that would prolly give me a good 60rps.
Seems close enough to a airsoft gearbox let me add a polarstar
would the same upgrades work on the srb1200? I want to upgrade spring and o ring and swap gears once they break
Yes they will work on the SRB1200.
@@engineerable just ordered battery spring and o ring
Could I get a list of the gears and spring on your website it’s really confusing because there are other things on there for the srb400
Metal gears and better spring everything that would make the internals of the srb400 last long and have better fps and will not strip with a 11.1v battery id really appreciate it
I will make a concise list. It is all documented on that page though, you just gotta search for it
How much weird you charge to fix one of these? My gun makes a high pitch noise but won’t shoot unless I hit it
Your gears are stripped, and can be repaired by replacing with metal gears. Sorry I don't offer a repair service.
Can you just replace the spring for more fps?
You can, but if you don't also replace the gears, you will strip them
Hey, what was the total price for all the new parts?
$50-$75 all the details are here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
Thank you! One more question, I was on the website and read a little of the text, but if I want to use a 11.1v battery do I have to upgrade the gear box too or just the gears/ metal gears.
@@zapponpc2965 TBH, the cost of doing all those upgrades with the stock non-standard gearbox is not worth it when you can buy a much better blaster for the same cost. Check out the gel blasters between $100 and $150 www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
I watched the whole video and it seems like a process to upgrade the SRB blaster. I just like the simplistic look and design of the SRB400, I looked at the other blasters that you linked, which I liked, but I don’t like the design very much, the blaster looks too real!
@@zapponpc2965 Agreed, but it would be time better spent to get the higher quality blaster and downgrade the appearance. 3D print mods to change the appearance to less realistic.
Imma need you to do that for me
Hi , great video ! Wondering if you have any idea where can to buy Ratchet Pawl Spring ? Thanks .
You have to buy the whole V3 spring set, that includes all the gearbox springs. Link is on this page www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
when will pt 2 come?
Within a few days. Thanks!
If I send you my splat gun would you upgrade it ?
Sorry, you'd be able to buy a top of the line blaster for what I'd need to charge to upgrade these. Check this list and buy something in the $125+ category that's already upgraded. www.engineerable.com/single-post/what-are-the-best-gel-blasters-of-2023
My 375 broke on day one of buying it help me
Please
SRB375 is not really repairable. Return it where you got, and buy something better.
@@engineerable thanks man , I appreciate it
Can you please give me an estimate of how much these parts will run you? I want to do this to mine
~$60. You can omit the metal anti reverse latch and use the original plastic one to save $10
Are you in the U.S. it’s hard to get parts
@@marcusneal3083 no it's not they're airsoft parts
how much did the whole upgrade cost??? thanks and you just won another faithful subscriber:)
$50-$75 All the details are here www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-s-made-works
In my Airsoft m4 I use a m150 spring and it shoots 30 bbs a second 😂 it hurts
Do you really need the tube thingy
If you're referring to the shim, it won't work without it and I explain why in the video.
Does this end up working? Ima go ahead and order these parts. The lightening blister is literally the same stuff. There are some differences seems like the splattr has some better parts
It works great, but tbh, a full metal V3 gearbox costs almost the same, and is probably less work to mod. I have one, but haven't installed it yet.
@@engineerable been looking at some complete builds.. is the G36C / G36 the most compatible for plug and play? And if I were to buy an airsoft gear box. The only thing that would need to be replaced is the nozzle? Needs to be longer right?
@@TreYay83 Lightning Blaster is straight up WELLS G36c with added lights. I need to do some of the metal gearbox mods first before I can comment on what all is needed
@@engineerable ya, there has been a bunch of these guns made it seems. Wells has even put out different variations of this gun. First being black, then a gray/blue one, and now this translucent green/orange. It also seems that any v3 gearbox should work. I'm a noob at this but I'm understanding more and more each day
@@TreYay83 I assume you have seen this version comparison then? forum.gelblasterforum.com/t/wells-g36c-version-confusion/9824/2
Based on that, this looks like a hybrid. It has the 370 motor of the V2 (smaller than Splatrball), but the electric mag of the V3
can i do this with the pulsar pro
Yes, you can replace the Pulsar Pro gears with metal ones, in fact it should be easier because you shouldn't need to modify the piston.
Hey I was just wondering if maybe I could pay u to do it for me cause I’m not good at that 🙏🙏 appreciate the video by the way