Very useful. I had the same on my 2014 cora D 1.3CDTI 55kw. Replaced the glowplug after measuring them out. Only 1 was broken. The outer right one. Light went out after replacing it.
The same problem occurred in my 2013 Corsam. My fan was working constantly. At the service, they connected it to the computer. It showed a thermostat failure. The thermostat was changed. The fan returned to normal. The light went out.
i got the same light on me dash, it drives well, But first we did a read out with opcom and there it said glowplug 1, 3, 4 was not working. and thats correct the car needs more time to start because it haves only 1 glowplug lol. so, i gonna change them this week normally and edit these post to keep an update of the changes :) its a opel corsa 1.3 CDTI 95HP 2010. [120.000km's]
I had the same problem, but its not a big deal. It showed up because 2 out of 4 engine heaters were dead. So I bought a new ones and it never showed up again
does this also apply to opel antara? it's an automatic, when I'm driving, three lights first appear, two for skidding and the third for auxiliary braking on a downhill slope, and then the video light also appears (car with key) and the transmission goes into 4th gear and doesn't change gears.
Did your vehicles go into limp mode while driving with the light on your dash? I have the same problem the vehicle flashes the light and goes into limp mode
I remember that I didn’t have to remove the turbo. However I had to use socket extension bars that can offset/bend away from the turbo (I don’t know their name but came with my draper expert socket set). I had to remove the pipes and heat shield from the turbo. I remember I was so glad not to have to remove the turbo. My sons engine is identical to the one in this video, it’s a 2011 limited edition eco flex... I choose to do this job myself because the garage warned me of the possibility of snapping the glow plug and requiring them to be drilled out at huge cost. I decided to soak the plugs in wd40 prior to removing and using my own judgment as to how much pressure needed to loosen them.
@@raysentana991 Hello, like i say in the video, i went to the bosch repair center, the replaced the one glow plug that was broken, the second from the left, without taking out the turbo.
@@lettucefarm Mate how did you do it? The gap is tiny. The DPF and turbo leave almost no space. weren’t they too long to bend out of the gap when taking them out? Looks impossible without removing it all
@jan sv hi I have a vaxhuall corsa sxi 61plate my glow plug light flashes and doesn't turn off also my fuel is really bad full tank shows 450miles but only gives me 150miles do u think this is because of glow plugs
Hello, it is possible that the fuel consumption increases, but this is extreme. I think the best you can do is replace the broken glow plug (if you know witch one it is) or replace them al 4 is you don' t know wich one it is. And then see how much the fuel consumption is. Around 100.000 km they start to fail (on our corsa)
Thanks for the reply yh will get all 4 changed tomorrow just went to a few mechanics some didn't give me an answer one mechanic said the dpf is clogged and will need replacing however I have no loss of power or engine light
@@mushy7869 I hope the problem is solved when you replace the 4 glow plugs. The dpf replace is very expensive. And indeed, normaly you will get a warning light when its clogged. Success
Hi, I've got problem with my 1.3 corsa 07 plate. The car service light is on. And the car doesn't go higher than 2000rpm. If I drive. after a bit the gas pedal won't work at all. Can you tell what's the problem?
That will be your egr valve stuck opening had same problem. I took the black controler of top of egr Vale to find the valve was stuck open sprayed it with wd4o loads and now it's fine ...
I got same thing showing up 2007 reg But it only shows at around 3000rpm and I’ve noticed on 5th gear if I go over about 65m/h soon as this symbols lights up it last like second and car looses power I found it on net they call it limp mode. Different ppl telling me different stuff. I think it’s or Air flow sensor or filters dirty air fuel oil I’m going to try swap those and I will come back and leave comment if it helped. If anyone have any ideas how to fix it please let me know
@@JanSV You don't need to erase the error code. if the problem was a burnt glow plug and you changed that Next day the light for error code remains off
Bro help. when i turn on the car after two minutes this light comes on and as soon as I turn off the car and open it again the light does not come on is it a glow plug?
Hello, normally when it is the glow plug, it lights up when you start the car and stays on untill you stop the car. So i don' t think it' s the glow plug. Read out the computer to be sure. You can buy a obd scanner to do it yourself. Greetings
If you do not have A maintenance history. I would replace the 4 glow plugs. . Or you can buy A diagnostic obd reader. And read out the board computer for errors. Maybe then you can see what Seems to be the problem.
Hi, I've got problem with my 1.3 corsa 07 plate. The car service light is on. And the car doesn't go higher than 2000rpm. If I drive. after a bit the gas pedal won't work at all. Can you tell what's the problem? Please help this same problem
Hello. Our car was still running normal. The only thing was the alarm on the dashboard. The best thing you can do is read out the board computer. Maybe its the erg valve?
I had engine management light on mine and garage said glow plugs so I changed all 4 and the management light went but when I'm driving and put my foot down the car with wrench icon pops up then quickly put me into limp mode then disappears
Hola, la alarma en el tablero estaba encendida. Y la causa fue que se rompió una bujía incandescente. Lo cambié en un taller de servicio de Bosch. Entonces la alarma se apagó. Problema resuelto. Saludos desde Bélgica.
avec google translate. Bonjour à tous, nous avons un nouveau problème avec notre opel corsa D de 2012. Depuis hier il y a une nouvelle alarme sur le tableau de bord. Nous avons donc un nouveau problème avec la voiture. La voiture avec la clé reste active. Vous verrez que cette icône est allumée et reste allumée même lorsque la voiture est en marche. Dans le manuel ici, vous pouvez voir qu'il s'agit de ce symbole. Et quel est le problème. C'est écrit sur le papier. prochain entretien du véhicule s'allume ou clignote en jaune S'il s'allume lorsque le moteur tourne Ensuite, il y a un problème avec le moteur ou la transmission L'électronique passe en programme d'urgence La consommation peut augmenter et le véhicule peut rouler moins bien. Si l'erreur ne disparaît pas la prochaine fois que vous démarrez la voiture, vous devez vous rendre au garage. J'ai ensuite fait lire la voiture au garage bosch. Et une bougie de préchauffage s'est avérée cassée. Après avoir remplacé cela, l'alarme sur le tableau de bord avait disparu. Et donc le problème a été résolu. Il est donc possible que vous ayez une bougie de préchauffage qui soit cassée si vous obtenez également cette alarme.
@@Tiziouzou15000 Le signe d'alarme, la voiture avec la clé peut également s'allumer avec d'autres problèmes. Donc pour être sûr qu'une bougie de préchauffage est cassée, il faut en fait d'abord lire l'ordinateur de bord de la voiture. Cela montrera alors ce qui est cassé. Mais il y a de fortes chances que ce soit l'une des bougies de préchauffage. Ceux-ci sont dans le moteur. 2 sont même en partie derrière le turbo. Ils sont difficiles à manipuler et peuvent également se casser si vous essayez de les dévisser. Donc si vous n'y connaissez pas grand chose, il est préférable de le faire faire dans le garage. Cordialement
Translated to english : for all : For me, this light has been on for 150,000 km, it shows a fuel temperature sensor error, but I haven't touched anything and the car works normally.
Хобби
Very useful. I had the same on my 2014 cora D 1.3CDTI 55kw. Replaced the glowplug after measuring them out. Only 1 was broken. The outer right one. Light went out after replacing it.
Thanks for sharing sir 😊
The same problem occurred in my 2013 Corsam. My fan was working constantly. At the service, they connected it to the computer. It showed a thermostat failure. The thermostat was changed. The fan returned to normal. The light went out.
Very useful thanks
You are welcome
i got the same light on me dash, it drives well,
But first we did a read out with opcom and there it said glowplug 1, 3, 4 was not working.
and thats correct the car needs more time to start because it haves only 1 glowplug lol.
so, i gonna change them this week normally and edit these post to keep an update of the changes :)
its a opel corsa 1.3 CDTI 95HP 2010. [120.000km's]
Thx for sharing.
Hey, you wanted to give an update :-)
@@Icore1988 i changed all the glowplugs and the problem was solved.
It's simple
P0671=1-cylinder
Glowplug burnt
P0672=2-cylinder
P0673=3-cylinder
P0674=4-cylinder
Glowplug burnt
The glowplugs are only for a good start
When all glowplugs are good=ok
Then you have a better start
Was your car performance better after changing the plugs?
Nope, it was just the same, only one glow plug was changed, the broken one
The glowplugs are only for a good start
When all glowplugs are good=ok
Then you have a better start
I had the same problem, but its not a big deal. It showed up because 2 out of 4 engine heaters were dead. So I bought a new ones and it never showed up again
Good fix
Thank you for letting people know that but I think it’s just need to change the Glow blocks that’s ⌛️
Yep someone Said normally at 90.000 km you have to change al the 4 flow plugs normally. That was not done with our car. Greetings
does this also apply to opel antara?
it's an automatic, when I'm driving, three lights first appear, two for skidding and the third for auxiliary braking on a downhill slope, and then the video light also appears (car with key) and the transmission goes into 4th gear and doesn't change gears.
Never worked on an opel antara. Don' t know.
I think that was an EPS-problem or ABS-problem
Nice montage when opening the hood!
Thx bro
My car goes into some sort of safe mode after just going over 60mph but not sure whats the problem
Egr filter
Did your vehicles go into limp mode while driving with the light on your dash? I have the same problem the vehicle flashes the light and goes into limp mode
car was driving normal. also exelerating was normal. the only thing you saw was the alarm in the dashboard.
I have this issue but don't know what it is 😭😭😭😭
I had the same warning on my 2013 Corsa D 1.2. It turned out to be the throttle sensor though.
My son has the same car, 2011. We had the same issue diagnosed. I changed all 4 plugs and this reset the fault automatically.
Nice job. The Son Will be glad
How did you change the plugs? My turbo is in the way and it’s so hard to get to them
I remember that I didn’t have to remove the turbo. However I had to use socket extension bars that can offset/bend away from the turbo (I don’t know their name but came with my draper expert socket set). I had to remove the pipes and heat shield from the turbo. I remember I was so glad not to have to remove the turbo. My sons engine is identical to the one in this video, it’s a 2011 limited edition eco flex... I choose to do this job myself because the garage warned me of the possibility of snapping the glow plug and requiring them to be drilled out at huge cost. I decided to soak the plugs in wd40 prior to removing and using my own judgment as to how much pressure needed to loosen them.
@@raysentana991 Hello, like i say in the video, i went to the bosch repair center, the replaced the one glow plug that was broken, the second from the left, without taking out the turbo.
@@lettucefarm Mate how did you do it? The gap is tiny. The DPF and turbo leave almost no space. weren’t they too long to bend out of the gap when taking them out? Looks impossible without removing it all
Same happen on mine all lights come on an off an engine management light stays on until the car is started
i got same icon but its disappear when i turn off and turn on again its gone..
Easy fix
@jan sv hi I have a vaxhuall corsa sxi 61plate my glow plug light flashes and doesn't turn off also my fuel is really bad full tank shows 450miles but only gives me 150miles do u think this is because of glow plugs
Hello, it is possible that the fuel consumption increases, but this is extreme. I think the best you can do is replace the broken glow plug (if you know witch one it is) or replace them al 4 is you don' t know wich one it is. And then see how much the fuel consumption is. Around 100.000 km they start to fail (on our corsa)
Thanks for the reply yh will get all 4 changed tomorrow just went to a few mechanics some didn't give me an answer one mechanic said the dpf is clogged and will need replacing however I have no loss of power or engine light
@@mushy7869 I hope the problem is solved when you replace the 4 glow plugs. The dpf replace is very expensive. And indeed, normaly you will get a warning light when its clogged. Success
When the glow plug light flashes then you must clean the dpf-filter, you must drive 20-km with the car 3-gear and 3000 r/min
Is a glow plug same as ignition coil?
No. Glow plug is for diesel engine. Ignition coil for petrol
Thanks
No glow plug is in some country also known and heater one heater for each cylinder only for diesel engine there is no heater on petrol engine
Hi, I've got problem with my 1.3 corsa 07 plate. The car service light is on. And the car doesn't go higher than 2000rpm. If I drive. after a bit the gas pedal won't work at all. Can you tell what's the problem?
I cant tell. Best is to read out the board computer.
That will be your egr valve stuck opening had same problem. I took the black controler of top of egr Vale to find the valve was stuck open sprayed it with wd4o loads and now it's fine ...
Centralina motore ha presi acqua peche si trova sotto motorino tergi cristalli
I got same thing showing up 2007 reg
But it only shows at around 3000rpm and I’ve noticed on 5th gear if I go over about 65m/h soon as this symbols lights up it last like second and car looses power I found it on net they call it limp mode.
Different ppl telling me different stuff.
I think it’s or
Air flow sensor or filters dirty air fuel oil
I’m going to try swap those and I will come back and leave comment if it helped.
If anyone have any ideas how to fix it please let me know
Hello I have the same issue with my car. Did you find the solution ?
?
How you van reset the motor management light ?
The works were done in the bosch service center. Bult i think the light wil go out after remplacing the broken glow plug.
@@JanSV
You don't need to erase the error code. if the problem was a burnt glow plug and you changed that
Next day the light for error code remains off
My light come on when driving going on and off. But it’s not come on since also my car doesn’t want too go past 80mph
In your case I have no idea what it could be. Best to read through obd. regards
Bro help.
when i turn on the car after two minutes this light comes on and as soon as I turn off the car and open it again the light does not come on is it a glow plug?
Hello, normally when it is the glow plug, it lights up when you start the car and stays on untill you stop the car. So i don' t think it' s the glow plug. Read out the computer to be sure. You can buy a obd scanner to do it yourself. Greetings
@konstantin-1970 ναι φίλε το πούλησα και ησύχασα 😅
I have same problem but goes away when it turns off and on again but sometimes Goes into limp mode can u help at all please
How much miles does the car have? And how may miles ago the glow plugs were changed?
Greetings from belgium.
@@JanSV I have only just brought the car so not sure when they was changed also it's on 113000 miles
If you do not have A maintenance history. I would replace the 4 glow plugs. . Or you can buy A diagnostic obd reader. And read out the board computer for errors. Maybe then you can see what Seems to be the problem.
Hi, I've got problem with my 1.3 corsa 07 plate. The car service light is on. And the car doesn't go higher than 2000rpm. If I drive. after a bit the gas pedal won't work at all. Can you tell what's the problem? Please help this same problem
Hello. Our car was still running normal. The only thing was the alarm on the dashboard. The best thing you can do is read out the board computer. Maybe its the erg valve?
Plz answer me brother same light in my car Corsa 1.2 when the light comes rpm goes down only 20 max speed was going? What should I do
Hello. The best thing is to read out the board computer to see what seems to be the right problem. Greetings.
@@JanSV computer shows that the sensor problem and we changed it after that it was running good 2 days after again same problem it giving me
@@shahaanmohd2452
Did you find the problem??
Did you find a solution??
Wich error code have you???
I had engine management light on mine and garage said glow plugs so I changed all 4 and the management light went but when I'm driving and put my foot down the car with wrench icon pops up then quickly put me into limp mode then disappears
I hope you get it fixed.
Quien me lo explica en espanish
Hola, la alarma en el tablero estaba encendida. Y la causa fue que se rompió una bujía incandescente. Lo cambié en un taller de servicio de Bosch. Entonces la alarma se apagó. Problema resuelto. Saludos desde Bélgica.
Quelqu'un peut me traduire en Français s'il vous plaît ??🥺
avec google translate.
Bonjour à tous, nous avons un nouveau problème avec notre opel corsa D de 2012.
Depuis hier il y a une nouvelle alarme sur le tableau de bord.
Nous avons donc un nouveau problème avec la voiture.
La voiture avec la clé reste active.
Vous verrez que cette icône est allumée et reste allumée même lorsque la voiture est en marche.
Dans le manuel ici, vous pouvez voir qu'il s'agit de ce symbole.
Et quel est le problème.
C'est écrit sur le papier.
prochain entretien du véhicule
s'allume ou clignote en jaune
S'il s'allume lorsque le moteur tourne
Ensuite, il y a un problème avec le moteur ou la transmission
L'électronique passe en programme d'urgence
La consommation peut augmenter et le véhicule peut rouler moins bien.
Si l'erreur ne disparaît pas la prochaine fois que vous démarrez la voiture, vous devez vous rendre au garage.
J'ai ensuite fait lire la voiture au garage bosch.
Et une bougie de préchauffage s'est avérée cassée.
Après avoir remplacé cela, l'alarme sur le tableau de bord avait disparu.
Et donc le problème a été résolu.
Il est donc possible que vous ayez une bougie de préchauffage qui soit cassée si vous obtenez également cette alarme.
@@JanSV merci beaucoup pour cette tradition 🙏🙏
J'ai le même problème où je peux enlever la bougie de prechauffage casé ??🙏 merci
@@Tiziouzou15000 Le signe d'alarme, la voiture avec la clé peut également s'allumer avec d'autres problèmes.
Donc pour être sûr qu'une bougie de préchauffage est cassée, il faut en fait d'abord lire l'ordinateur de bord de la voiture.
Cela montrera alors ce qui est cassé.
Mais il y a de fortes chances que ce soit l'une des bougies de préchauffage.
Ceux-ci sont dans le moteur. 2 sont même en partie derrière le turbo.
Ils sont difficiles à manipuler et peuvent également se casser si vous essayez de les dévisser.
Donc si vous n'y connaissez pas grand chose, il est préférable de le faire faire dans le garage.
Cordialement
Changer les 4 bougies préchauffage.
Meni ova lampica gori već 150000 km , izbacuje grešku senzora temperature goriva , ali nisam ništa dirao i auto radi normalno
Translated to english : for all : For me, this light has been on for 150,000 km, it shows a fuel temperature sensor error, but I haven't touched anything and the car works normally.
You must delete=erase the error code