It was first used at least during the Copper Age: dolmen, menhirs, underground tuning keys, listening chambers (called beehive "tombs"). Linguistics are revealing! Thanks for the tutorial.
reminds me of an electromechanical relay,because of the electromagnet used to open and close the switch. tip:heat the EM nail as much as you can,but do not melt it.because soft iron,which you get by heating an iron nail,is magnetic only when current passes through,but on the other hand,regular iron nails retain a lot of magnetism even when the current is off,do this so the nail doesn't stick to the lid,i used too much turns,like 400 on the biggest nail i could find,and the lid just got stuck to the nail, just posted this tip to make sure nobody repeats this mistake.
The most it’ll do is reach up a few miles. On a perfect day with proper propagation it’ll reach about a few hundred miles but only if ur lucky. And most importantly. You need an amateur radio license for this and need to make your transmitter INSIDE of the amateur radio bands. Otherwise the FCC will come and get you.
Really solid explanation and demonstration best i seen so far especially with the radio test. No one has done that.
One word........this is the most accurate tutorial ever in you tube
Thank you!
That's ten words, twelve if you count "one word"...
This video is so helpful, and I’ve always been interested in telegraphy. You just earned a subscriber!
•- •-- • ••• --- -- • -•-•--
Interested in telegraphy? Have you ever heard of amature radio?
@@stevet7522 I have, and copied his code on the first try.
THIS MAN SHOWING HOW TO MAKE THIS DEVICE IS A SMART A** DUDE,I GIVE BIG A** THUMBS UP👍👍👍👍👍
This is one of the coolest projects on RUclips
Thanks, that really means a lot
😊Hi Dieter in the past was like this! Greetings from Italy, "IK2RGV" telegraphy operator 👋👋
It was first used at least during the Copper Age: dolmen, menhirs, underground tuning keys, listening chambers (called beehive "tombs"). Linguistics are revealing!
Thanks for the tutorial.
Very good. So the springiness of the lid acts as the rocker arm you would find on the Marconi transmitter.
Thank you for this well-made, informative video!
I want to ask you a question:
How did you connect the telegraph to the am station?
Anybody got anwser
Maybe just some random am station without signal
I don't think he reads comments
It becomes the station, the thing I built transmits the Morse code in the form of radio waves, which you can get on a radio
you can leave it connected to the battery, and then check what frequency it takes on the radio.
How far does the signal get?
I got a question, what if your electromagnet doesnt work when you try to magnetize it
Check your wire and make sure it is all getting electricity, add extra coils, or make sure you have a big iron or steel nail
18:20
You said subscribe, and I also noticed that it is the same code that you wrote in the cover image, is that correct?
Can we use cardboard of foam for the structure
anything you can get your hands on that is not conductive
Doooood! Total fun, easy to understand......Thanks much mate!
can you make a video on how to make a receiver (something like a coherer and a de-coherer) that can receive morse code
That’s the game plan, just don’t have too much time
@@dieterdoes9497 well imma subscribe so i can get notified when you make a new video
@@yadadi4438 thanks a lot
@@dieterdoes9497 no problem, i’ll be waiting for a video 🇺🇸
Yes make video
My telegraph doesn't work after 2 days of woring. What i have to do???
Thanks a lot bro, I just lost my phone, I'm saved now :-D
The second morse code means "Subscribe":-)
great work best transmitter
Does it work with big wire or no
Don't worry dieter we're here for you
Can we use piezoelectric to transmit sound?
reminds me of an electromechanical relay,because of the electromagnet used to open and close the switch.
tip:heat the EM nail as much as you can,but do not melt it.because soft iron,which you get by heating an iron nail,is magnetic only when current passes through,but on the other hand,regular iron nails retain a lot of magnetism even when the current is off,do this so the nail doesn't stick to the lid,i used too much turns,like 400 on the biggest nail i could find,and the lid just got stuck to the nail, just posted this tip to make sure nobody repeats this mistake.
That super helpful, thanks!
Okay, I'll subscribe, craziest key I've ever seen.
What would happen if I didn’t sand the screws?
as long as all the wire and screws can make a good contact, you don't need to, but usually they are coated in something
Hepful thanks....Why dont you make more videos of such kind.
hello you are genius and also i love morse code so this helps me alot
Buen trabajo.
Saludos desde la ciudad de Córdoba, Argentina.
LU2HRL
How do you get the code on the radio?
wtf i watched the whole video and it was goooood
You are Genus
The messiah has returned.
and how to make its receiver?
i am waiting for the next video where u show the remaining work
ruclips.net/video/ZVRyEhHu8DI/видео.html
Can you use double a battery?
It may not have enough voltage, if so, rig multiple in series
Can i use a 1.5v battery?
It may not have enough voltage, if so, rig multiple in series
@@dieterdoes9497 ok thanks
Hi, great video but what is the antenna here?
There is no antenna used, if you wanted to increase signal I think adding an antenna to somewhere around the nail is best, but I’m not really sure
Great tutorial! Thank you
Nice video👍 when do you upload the video on how to build the radio?
Great video!
you got a sub
The morse code said "subscribe"
Add the antenna
this video really helps
What type of wire did you use??
Enameled Wire Winding
Yo tysmmm@@damy997
That's a very good lesson," you have to be a teacher at the university.
Cool video
nice video, how far the signal goes?
Probably up to the Moon....
The most it’ll do is reach up a few miles. On a perfect day with proper propagation it’ll reach about a few hundred miles but only if ur lucky.
And most importantly. You need an amateur radio license for this and need to make your transmitter INSIDE of the amateur radio bands. Otherwise the FCC will come and get you.
Lmao @@astro.p
@@astro.pIt will reach only about 10 meters. With antenna it could reach few hundred meters or few kilometres, depends on the size of the antenna
Well done!
Can I use copper
Yes u can
the thumbnail say "subcribe"
You know spark gap transmission is illegal right?
Since this one probably wouldn't interfere with nearby radios its fine but still technically legal.
The signal can't go far enough to mess things up. I guess.
And why would you need this ?
Fun!
@@dieterdoes9497 no way you commented a whole year later😂
@@lunalunita975👌
nice
What's the range? And how can you increase it?
Impressive
Is it morse code?
sophia and I figured out the secret code big brain!!
very nice
Make more videos like this
I knew what it would be before you did it the S word.
Took me like one minute to figure out that on the thumb nail it said subscribe
Thumbnail Morse Code says subscribe
why does it transmit
You can use it to transmit Morse code
The sparks created produce em radiation
@@dieterdoes9497 and how would you attach an antenna to it to increase the range?
@@yadadi4438 I have not tested this yet, but a good guess would be the large screw or lid
@@dieterdoes9497 are you fluent in morse code?
OMG, i Will try
I have an Idea make a telephone
Dieter does...
morse code is an help signal
it mean SUBSCRIBE
yeet
ye
Why did you say that the coating on the motor wire was metal? It is insulation, a nonmetal.
Where exactly do you see a motor?
I mean the nails*
yeeet
🤔🤔👏👏👏👍👍👍🇨🇱🇨🇱🇨🇱🤔🤔
first
you mean second last
"subscribe" Are you a ham?
i'm compelled to S U B S C R I B E for some reason🤔
Struggles to figure out the color of the COPPER wire so guesses gold.. :l I'm pretty sure Copper wires color is.. copper.
yeet
FCC...
yet
et
Is he she
No I just have long hair, it’s since been cut
You are breaking the law. Agency monitor all air ways. Your gap plays havoc with all EMF.
yeet
yeet
yeet
yeet
yeet
yeet
yeet