The only question I have is why would you not take the holes on the camera side for about a 180 degree turn rather than the holes on the far side of the brake for an almost 360 degree turn ? I just got the Precision Armament M11 Severe-Duty Muzzle Brake 5/8X24 for my 6.5 Grendel along with the washer kit and I'm trying to understand the directions clearly. Also, what's the great song at the end of video ?
This system does NOT work with IWI Tavor's. They should mention this on their site as it is a waste of $20 for Tavor users. When contacted PA says to use two washers with the Tavor but even then you can't get a perfect alignment. I spent almost an hour trying to get the right combination of washers but it still wasn't quite right. Ended up using the stock jam nut to install my muzzle device. Very disappointing.
He states 'you can actually use on 9 different muzzle devices'...unless of course your other 8 guns need the same washer that you used on the first one. $25 leaves you 14 washers that may or may not work on any other rig you have. That makes the ONE washer you do need terribly expensive
I have to agree with you applejacks. The odds of being able to use it more than a couple times is astronomical. Crush washers (a NEW crush washer) will work EVERY time. And they are cheap. For $25 you can buy a bag of crush washers, and have each one work out. Another example of a solution to a problem that doesn't exist.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thank you!! This video is a lifesaver. I was all nervous about doing this and now I’m good to go. Keep up the good work.
I’m a caveman so I didn’t understand the instructions. So thank you.
Cool little product.
The Daily Shooter thanks bro
Good stuff Bro!
The Lone Patriot 111 thanks bro
Thanks 4 the share Cory!
guns4funcajanajustin Thanks for watching bro
Sweet system. Some of that High Heat BBQ spray paint would work good to color them flat black
That's a good idea.
The Daily Shooter This ain't no hat rack =)
gunnwild1 Great ideal and lmao
Or a black sharpie
Very cool Cotton, Thanks for the info/link
***** anytime thanks bro
Thanks been on vacation should start uploading more this weekend
Great review Silver looks okay yea you can Paint It Like You said,Work great.
derplinkster yeah I don't mind it looks great with a stainless barrel
The only question I have is why would you not take the holes on the camera side for about a 180 degree turn rather than the holes on the far side of the brake for an almost 360 degree turn ? I just got the Precision Armament M11 Severe-Duty Muzzle Brake 5/8X24 for my 6.5 Grendel along with the washer kit and I'm trying to understand the directions clearly.
Also, what's the great song at the end of video ?
I thought the same, why go all the way around when you could go half?
@@RJ-de2up Thank you !
They work very well and you save at the same time.
These rock! I have on all my suppressed rifles w break! Easy and precise!!
Go to copper washers ⁉️🤔 I can make them as thickness I want to get.
Try them. I can just sand them to thickness as needed. Works for me 👍🏽
Use these with a split washer and you don’t waste any crush washers ever again.
Thanks!
thats badass
This system does NOT work with IWI Tavor's. They should mention this on their site as it is a waste of $20 for Tavor users. When contacted PA says to use two washers with the Tavor but even then you can't get a perfect alignment. I spent almost an hour trying to get the right combination of washers but it still wasn't quite right. Ended up using the stock jam nut to install my muzzle device. Very disappointing.
Cool something i need to have
renemanjr123 awesome it's a great product
I wish I had a farm to shoot at where I could sport my big fat belly and shoot to my hearts content too! Thanks for the video.
Wright Connection yes sir
He states 'you can actually use on 9 different muzzle devices'...unless of course your other 8 guns need the same washer that you used on the first one. $25 leaves you 14 washers that may or may not work on any other rig you have. That makes the ONE washer you do need terribly expensive
applejacks971 that would be highly unlikely but if it did happen you would use combinations of different sizes to get where you need to be
I have to agree with you applejacks.
The odds of being able to use it more than a couple times is astronomical.
Crush washers (a NEW crush washer) will work EVERY time. And they are cheap.
For $25 you can buy a bag of crush washers, and have each one work out.
Another example of a solution to a problem that doesn't exist.
@@duanescarborough8297 crush washers do not work every time.
@@duanescarborough8297 Crush washers are not suggested for suppressors.....alignment issues....
bookmarked them, now just gotta wait the 2.5 months for the warcomp backorder :-(
Nice will have to check them out !!!
krazy45cat its a great product and cheaper if your doing multiple builds
damn those silver shim are ugly on an all black rifle
Need to speak into the mic, volume way too low !
Dab the washer with a bit of cold blue. Or go cheaper, and just blacken it with a sharpie or paint.
Fix the audio dude, it sucks.
I can't hear you, so I don't watch you.