i just completed this on my focus last week and i'm so incredibly thankful for your video! my wifes car was damaged a couple of weeks ago and it was beyond repair. your video turtorial saved us so much money after having to buy a car for my wife! i can't even put my gratitude in words! THANK YOU! 🙏🏼
Mother of God, the first thought that came to my mind was why the hell not to replace the discs and pads that are calling for replacement right away. These are very apparent savings.
Excellent video,very clear and helpful info, the only difference I could see from my Volvo C70 (Ford Focus suspension and chassis) is that the C70 has female bolts holding the bearing/hub in place, which can be a bit more troublesome I have been told !
Looks nice and easy on the ST. Absolute pain on the RS when working off stands, due to the rear driveshaft and domed knuckle assembly making it an incredibly tight and awkward area to work in. Even worse retorquing them, although they are pretty tight to remove!
Nice job. I will bet they can be a bugger to get that bearing out if they have a bit of age. I have done a couple of Minis over the past year and the back plates have turned to dust.
Yeah! I was surprised it cam out not too bad .. had a few insignias with the same style bearing that I’ve had to remove the whole hub and press them out!
I had new hubs put on mine 6 months ago and I think it's them making noise at 40mph upwards need help bought the hubs off ebay and mate put them on could it be them need replacing again please help someone
Hi my mk2 focus has the same bearing but has got those stupid Torx bolts holding it on I don't want to round them off so wondering if i heat them up they would come out easier. Cheers great Chanel
Been hamering for half an hour, no budge yet, soaking in cleaning vinegar right now Update: after soaking for 20-30 minutes it popped right off with a little tap of the hammer So guys use cleaning vinegar, it's a awsome rust disolver for those car parts that just don't want to come off
New Wheel bearing Ebay - ebay.us/rw2WE1
New wheel bearing Amazon - amzn.to/3JnGXx3
ABS sensor - ebay.us/wjXGYj
Tools used :
Milwaukee 12v 3/8 Impact driver - ebay.us/Pg8ilg
Milwaukee 18v 1/2" Impact driver - ebay.us/h7mI4N
Draper socket set - amzn.to/2FdUEjf
Screwdriver set - amzn.to/30RA53L
WD40 - amzn.to/3oiaIRE
Snap on Pliers set - ebay.us/suhaXX
Wire brush - ebay.us/E00HlO
Digital torque wrench 3/8 - amzn.to/2PP9vpP
Manual torque wrench 3/8 - amzn.to/33eZsxj
1/2" Torque wrench - amzn.to/2VZ4CKu
Hammer - amzn.to/2PAoD9V
Long reach ball end Allen key - ebay.us/CZyFCV
Long reach 3/8 ratchet - amzn.to/3iJsADg
E-torx Sockets - ebay.us/5a3i3Y
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site)
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
Torque settings :
Rear wheel bearing (4 bolts) 110NM
Caliper carrier bolts = 70NM
Caliper slider bolts = 35NM
Wheel nuts = 135NM
i just completed this on my focus last week and i'm so incredibly thankful for your video! my wifes car was damaged a couple of weeks ago and it was beyond repair. your video turtorial saved us so much money after having to buy a car for my wife! i can't even put my gratitude in words! THANK YOU! 🙏🏼
thanks for the comment glad to hear it
Effin love the videos where all bolts just fall in your hands...
Mother of God, the first thought that came to my mind was why the hell not to replace the discs and pads that are calling for replacement right away. These are very apparent savings.
Good vid. On my Sept 2016 focus the disc guards were totally rotten, literally falling apart!! £12 to £16 per side.
Yeah I’ve come across that before 👍
Great video, tnx on your expert knowledge and effort to record this. Please post more Ford mk3 videos if got any ford in garage. Tnx.
👍👍 thanks
Excellent video,very clear and helpful info, the only difference I could see from my Volvo C70 (Ford Focus suspension and chassis) is that the C70 has female bolts holding the bearing/hub in place, which can be a bit more troublesome I have been told !
👍👌 thanks for the comment
Looks nice and easy on the ST. Absolute pain on the RS when working off stands, due to the rear driveshaft and domed knuckle assembly making it an incredibly tight and awkward area to work in. Even worse retorquing them, although they are pretty tight to remove!
Nice job. I will bet they can be a bugger to get that bearing out if they have a bit of age. I have done a couple of Minis over the past year and the back plates have turned to dust.
Yeah! I was surprised it cam out not too bad .. had a few insignias with the same style bearing that I’ve had to remove the whole hub and press them out!
Top man, you certainly know your stuff, another excellent video👍👍..
Thanks Paul! 👍👌
I had new hubs put on mine 6 months ago and I think it's them making noise at 40mph upwards need help bought the hubs off ebay and mate put them on could it be them need replacing again please help someone
Hi my mk2 focus has the same bearing but has got those stupid Torx bolts holding it on I don't want to round them off so wondering if i heat them up they would come out easier. Cheers great Chanel
Yeah abit of heat can work wonders! They are often tight
Great video very well detailed I'm actually in need of doing mine and this video has reassured me. I can do this myself. Thanks again.
Glad it helped, thanks for the comment 👍
great video, clear info, cheers.
Glad you enjoyed it 👍
Been hamering for half an hour, no budge yet, soaking in cleaning vinegar right now
Update: after soaking for 20-30 minutes it popped right off with a little tap of the hammer
So guys use cleaning vinegar, it's a awsome rust disolver for those car parts that just don't want to come off
Good job !!! Thanks for video
Glad you liked it!👍
Jaki przebieg wytrzymaly stare lozyska?
90,000
@@diydaly it is not too much. Thanks for replay. My bearings had 170kkm.
Nice work 💪
Thanks 🙌
Nice video. Thanks!
Glad you liked it!
Can you hammer from behind with a chisel rather than hitting on the side?
I'll probably end up having to replace the brake dust shield given my aim!!
Possibly but it’s abit tricky for access , you could get a slide hammer attachment for the hub if not
As good as always, thanks for share.
Thanks !👍👍
Great video
Glad you enjoyed it
Now u can come to my house and do mine lol
Nic work sir 👌
Thanks mate 👍
14:40 those pins inastall without any grase !!!
The customer didn't realise to change router and break pads.
No a job for next time
ХОРОШАЯ РАБОТА!!!
Я ЗАВТРА БУДУ МЕНЯТЬ ЗАДНЮЮ СТУПИЦУ.
👍👍