That's a nice 80 series Land cruiser. The 6 litre will make a big difference. That cam is to big for that. Will lose a bit of power down low. Always awesome content Max and Rex. 😂💯👏👍
Great Content ~ I've also had Fun Studying LS Cams for Low End thru Mid Range Torque without "Chasing" unusable HP" in the Top of the RPM Leaning toward a BTR 4" Stroke Rec Port Heads 219/239 115lsa for a 416 (LS7 Stroked) 6.2 LS3 w 6L80 TuTd in an triple locked 96 Land Cruiser A heavy LS7 OEM Crank (rotating) w lightweight Pankl Titanium Rods w Mahle 11.1 (ricprocating) LS3 heads w LS7 exhuast manifold, cats, 3" Npp hopes to optimize NA Trottle Response & Torque @ 1500rpm ~ 6500 😎 5 year Cancer Survivor ~ Bucket List Ultimate Bow Hunting travel LC
Could you do this exact series again but as a full in-depth guide instead detailing every step including pulling the motor? I know its a big ask but I'd love to do this one day to my vehicle.
That's going to be an interesting build to follow. Thanks for sharing. 😎
That's a nice 80 series Land cruiser. The 6 litre will make a big difference. That cam is to big for that. Will lose a bit of power down low. Always awesome content Max and Rex. 😂💯👏👍
I swear I watch your guys' channel a bit and every couple of days recently there's been a new project you guys must be swamped
What a rig!
Love the engine crane 🤣🤣👌
Shes a bloody good one that one haha
Love the content great vid
Ls swap the excavator next
So much knowledge
Great Content ~ I've also had Fun Studying LS Cams for Low End thru Mid Range Torque without "Chasing" unusable HP" in the Top of the RPM
Leaning toward a BTR 4" Stroke Rec Port Heads 219/239 115lsa for a 416 (LS7 Stroked) 6.2 LS3 w 6L80 TuTd in an triple locked 96 Land Cruiser
A heavy LS7 OEM Crank (rotating) w lightweight Pankl Titanium Rods w Mahle 11.1 (ricprocating) LS3 heads w LS7 exhuast manifold, cats, 3" Npp hopes to optimize NA Trottle Response & Torque @ 1500rpm ~ 6500 😎
5 year Cancer Survivor ~ Bucket List
Ultimate Bow Hunting travel LC
Could you do this exact series again but as a full in-depth guide instead detailing every step including pulling the motor? I know its a big ask but I'd love to do this one day to my vehicle.
FYI TongYang make alot of oem quality aftermarket parts (quarter panels and fans etc) not too sure this thermal will go in the setup though
how this thermo*
Good to know! Pretty happy to give them a crack
80 series marks kit does definitely uses the ls flexplate
Btw i posted this before you confirmed it in the video haha
Sent rex some pics
Wish u boys was in WA. Would of sent my cruiser to u fellas for a conversion.
Where’s your shop..? I’m wanting to put an Ls2 in my triton
Turbo the 4.5 or ls swap? Benefits costs?
1FZ twin turbo👍
Should of used a Mazda 3 engine. Bolts straight in, no mods.
How much drive in drive out for LS patrol
Kingbarra ?
Its coming! Just needed to get a few of these conversion underway to make some room in the shed again haha