@@fedeeffe8584 The AP can be connected to a switch that's connected to the router. Also if you are using the AP with a PoE connection it has to connect to a PoE switch or PoE injector that then connects to the router. Hope this answers your question and thank you for watching!
Absolutely if your AP comes with the injector then its even easier. My APs don't have that feature. Thank you for watching and if you subscribed thank you as well.
Hi, great video! I was trying to clarify something that I didn't get answered in this vid. I have a large rambler house and I need at least two wifi network broadcasters, right now they have different SSIDs and I need to switch manually between them because devices hang on to the connection with the weaker signal even if it barely has a bar. I'm looking at upgrading my system, will access points handle automatically switching your device to the stronger wifi signal and all be on the same SSID? So I'll probably need two access points connected to a regular rouater?
Год назад+10
Dude spent 2 minutes trying to explain why I should watch his video and completely lost me by that point. Instead of just getting to the point right away and explaining everything within those two minutes.
Thank you for the video! Do you think this would work with existing ethernet ports? I rent, so I don’t really want to put a hole through the ceiling in my apartment, but we don’t get internet upstairs. There are many existing ethernet ports and coaxial cables upstairs though.
Silly question. What happens if you put a wifi6 AP in your ceiling and wifi5 in wall? I'm guessing they will still use the same SSID and switch automatically but you will be limited by which AP your are currently connected to?
Exactly and that is what I have. My old router is wifi5 and my AP is WiFi 6. FYI I use the AP almost all of the time. Its very fast and reliable. Thank you for watching I really appreciate it.
Question - I have wiring throughout the house, and a router in the closet I want to set up an access point to a wired connection in a bedroom to increase coverage of the existing network I am not trying to use an ‘extender’ that just rebroadcasts a wireless signal - I want to take advantage of my wired Ethernet throughout the house Is an access point what I’m looking for?
The AP can be connected to a LAN port in your house but it needs a PoE connection unless your AP has a DC power connection then a typical LAN port will work. My Access Points use PoE so I don't need the power supply for the AP its one less wire to get in the way. Hope this helps and thank you for watching!
Hi, tq for your sharing.I have a aruba AP connected from a hub, the connection is like this : layer 2 switch to hub to AP, I don't understand why I cannot get my wifi if I connect AP to the hub but no issues if I connect directly between AP and layer 2 switch.please advice. Thank you.
what should I use for my house very large 3500 Sq ft and a back house and I'm trying to use simplisafe wireless cameras and I can't get a good signal ?
Hey Mike, if i plan on hardwiring all of my acccess points, wont that eliminate the concern for those waps communicating to each other across the home??? So basically any of them will be good to go?
@@UltimateTechHub thank you for the timely response!! Im laying out my list of components, i do most of this work day to day, just not with networking cables. I am anxious to get it all done at the new place
I have been leaning towards the ubiquity stuff, but my buddy who works for a high end, home automation company swears by Araknis… so i may just go that route.. I am planning on a 15u rack, with patch panel, switch the whole 9 yards
I am hardwiring all tv areas, the waps, 4 ip security cameras (1440p), and maybe setup for the savant home automation equipment while i am at it. I would like to tell you, I enjoyed the video, and subbed. It is good content!
I'm using a Netgear AX3200 as an access point. How can I merge the SSID with my router's network to avoid having two separate SSIDs with the same name?
Would you recommend the Netgear WAX214? I have a 3300sq ft home. It is currently being built so I don’t know the dead zones. It is 2 story. My plan is to purchase 3 of them and space them out evenly from left side to right side of house and mount them on the ceiling of the second story to push signal down. I feel that 3 is more than enough hopefully. I only have spectrum cable so I wont be getting crazy speed just want to have the coverage for future proof when speeds increase.
That's a pretty good plan. I have the Netgear WAX630 AP and it covers 3500 sqft which is usually plenty for most homes. And with this model you can wirelessly add more AP into a Mesh network configuration. If you are building your home make sure to run cat6 to every room and I would run 2 cat 6 to every room. And also run cat6 to your future access points locations for the PoE connections. Also install a network panel so all of the cat6 meet up at that one area where your modem is installed.
@@UltimateTechHub yes I had planned to run cat 6a also to all the main rooms bedrooms/living rooms. But may I ask why 2 to each room? My plan at first was to put my router in the main living room but then I started looking into the POE access points and thought this was a way better idea and not so much of an eye sore being they are white and will match the ceiling. I do have an 8 port Netgear poe+ switch coming in as well for the access points. I know I would want my main tv source and main computers hard wired but the other hard lines are more for just in case. Just wondering why 2 in each room? I will also have the 4k defender series 8 camera installed. Which those aren’t using ethernet just hooked to it for online access. I had planned to put everything in the downstairs pantry as it is the most centralized location and isn’t a hot area like the attic. Also will the signal be ok mounted on the ceiling of the second story for downstairs access. I feel it will be but not sure. I live in a 2 story now and some areas upstairs are spotty with the wifi signal. The router is a Netgear R7400 AC2600. It is located downstairs on a bookshelf about chest height.
@@idlesquirrel The reason you should have 2 Cat6a lines is for expansion and just incase 1 cat6a fails you have a backup. Also that extra cat6a can be used as wall fishing tool to run additional wires like coax or speaker wires or more cat6 cables. The only downside is the extra cost of the additional cable. And the pantry location is fine as long as its not hot and its secure from any issues like kids or animals. You may want to run a cat6a to your front door for a ring doorbell or another brand. The ceiling mount is good for the upstairs but an additional access point should be mounted in the ceiling of the downstairs. I had this situation in my old house and the Wi-Fi was not consistent downstairs especially with lots of users. The access points can be setup as a mesh network and will work together for fantastic wireless coverage. I'm not familiar with the Netgear R7400 AC2600 but it probably only covers 2000 sqft and a 2 story will most likely have some dead zones depending on the routers location.
@@idlesquirrel !Anytime, thanks for watching and if you subscribed thank you as well. Also check out my Ultimate Home Networking Playlist for more than 50 videos that can help you get everything setup. Have a great day!
Great video! Question, I have the same ruckus AP in living room coming from closet set up as you. I want to get a better signal outside in my backyard. I already have Ethernet cable I ran from the ruckus in the closet to an outdoor tv and other items running through a netgear switch outside . Can I install another AP coming out of the netgear switch? Or would you recommend another method. Don’t really want to spend a fortune on another ruckus just to get a little better Wi-Fi outside if I don’t have to. Thanks!
You could just install a cheap Mesh Wi-Fi system that has 2 or 3 nodes. You would install the main Mesh Node where your wireless router is via a LAN port from the router then set up the mesh wi-fi with the required app. Then place the other 2 nodes, maybe 1 or 2 in your backyard under a patio for weather protection. That would solve your wireless problem. Here is a video I did on a cheap mesh wi-fi system. ruclips.net/video/2SWS8F3HvtU/видео.html FYI- this giveaway is already over. But we are going to giveaway this exact mesh system in November or December to a lucky Ultimate Tech Hub viewer so keep an eye on our channel for further details. Thank you for watching I really appreciate it.
It's used for both. Power and data. For example, my PoE wireless access point gets power and data from the Cat6a ethernet cable that's plugged into my ruckus PoE switch. Thanks for watching!
@@UltimateTechHub what if i use it only for power and use wifi signals to get the internet Actually i am wroking on building up a private wifi netwok with lora network i want to connect lora gateway with wifi extender then wifi extender to long range Wi-Fi in order to cover 50Km distance
Hi .... amazing video, I have a question: I have the orbi ax6000 2 pack but in my 3 store house I have bad connection downstairs, also I need Vlans, for that reason I was thinking to upgrade to the orbi ax6000 Pro , or the aruba insta on, I already know the orbi, only thing it is too expensive, the aruba is more economical but my question is how this wap works when you are streaming 4k movies plus kids playing Xbox and Nintendo plus browsing at the same time? .... the orbi handle all, but how is this waps work , are they good ( I have high speed internet 1gb) thanks for your help
These waps use mu-mimo technology and the newer wifi6 waps are even better with handling multi users and high bandwidth usage. I have 1 gig internet and my wap handles many users streaming movies and games.
@@UltimateTechHub nice, my last question my friend how I can connect one of this wap to Surveillance system that use only rj45, in my case the orbi has a the 5more than 4 Lan ports on the satelite that I use for my Nvidia and the cameras, Nvidia has wifi connection but my Surveillance system doesn't any advice to connect system to the wap, is there any wap with lan ports? Thanks
Thanks. I appreciate your informative VID. Two comments, unless I missed it, I am looking for a recommendation from an expert on an outdoor Access Point. General comment, I would recommend not constant referral to "guys", I know that is generic, but as a woman, I felt a little offended/left out - no big deal, personal bother.
Great point! Sorry it's just how I speak! I call my mom and dad guys when I text them! Outdoor access points are installed the same way just install them under a patio or some sort of cover to keep the rain off it. Thank you for watching e.k.sanchez.
Not a problem - just old school! Hey, listen guy, are you suggesting that I MAY be able to use a regular Access Point (not specifically outdoor) outside if I keep it under a patio, or cover? If so, or do you have one in mind that you strongly recommend? Thanks.@@UltimateTechHub
@@e.k.sanchez I would use an outdoor AP because they are built for extreme weather situations. Netgear makes great outdoor APs just do a quick internet search. I can't recommend any specific AP because I haven't installed any. Sorry Gal!
No, Wi-fi Extenders are not as reliable and fast as Access Points. Access Points are designed for High Throughput and 100s of devices. Extenders are not designed for that. Get an access point you wont be sorry. Thank you for watching and if you subscribed thank you as well.
High techhub, I'm wondering if adding another Access point will increase bandwidth and allow more devices to connect than say if I only had one router. Essentially will an additional router uses for an AP be able to allow say 20+ more devices to connect.
This acces point will work perfectly for your needs. Check out my video I just posted. ruclips.net/video/HaFEwhxU-6A/видео.html Keep me posted on what you decide. Thank you for watching.
Zero loss at 100ft. What kind of cable are you using? Make sure it's rated for outdoor use and bury the cable in some kind of conduit like PVC pipe. You may want to bury 2 cables in the same conduit incase 1 cable fails in the future. Good luck and keep me posted!
I have a router given to me by my isp and my plan can bad up to 9 devices 300up and 30 down, can I allow more devices by adding an access point and adding devices on there?
Yes but you do need a PoE connection. So you could plug a PoE switch into your router then connect the access point to it. Otherwise you can just add a second wireless router to your main router. Here is a video I made on that subject ruclips.net/video/qpcWucapIRg/видео.html Keep me posted and thanks for watching.
Hello I had a question, please help If i use the Access Point TP-LINK TL-WA801ND_V1 Wireless N300 And use an outdoor parabolic dish instead of access point antennas, to send the Wifi 2400 MHz frequency, how far can I receive the frequency 100% without loss of quality ???
Is there an access point that I could use for my guest of my house that would only allow internet access. But no local area access on my home network; maybe just my printers?
With most new Access Points you can block local access to pcs and printers. I recommend Netgear access points. I use the WAX630. How fast is your ISP speed?
@@UltimateTechHub I have Xfinity Internet XFi Advanced Gateway XB7 and I get 695Mbps Upload/ 23.4Mbps download wired 279.8Mbps Upload/22Mbps Download wireless and 365.2Mbps Upload/ 22Mbps Access Point. I have a Netgear 6 AX1800 Access Point WAX610. I don't see a setting to the access point to limit access to only internet. And I don't see a setting on the Gateway to set the Access point to internet only. I did set on the Gateway to have a static ip on the Access point. I have a Netgear ProSafe 24 port gigabit switch JGS524; this has a connection to my access point.
@@tomm1359 In the Control Panel, click Network and Internet and then Network and Sharing Center. Click Change advanced sharing settings and then choose Turn off file and printer sharing. This should work. Keep me posted.
@@UltimateTechHub Thanks for responding back to me. I appreciate it. I understand what you are saying. But I would like to know if there is a setting I can make on my router or access point that will prevent my guest (to my house) from them preventing on getting on my local network. I leave my file sharing unprotected so guest could possibly delete complete directories on my network. I would like to just give them the SSID and guest password. And even with their PC with advanced files sharing ON, they could not get on my network. I guess I could put passwords on my pcs on the network. But, it is easier not to put passwords on my pcs. Also if I put passwords on my pcs, I don't think my smart tvs will be able to access Videos on my network. I know on my previous netgear router they have a SSID that you could configure as a Guest Access that would allow only internet access. But now I have to use the Xfinity Gateway (Modem/Router) XB7.
@@tomm1359 The local network settings really depend on which brand router and access point you have. Best option is the guest access on the wifi. My netgear guest access blocks access to pcs and personal data. Hope this helps.
@@UltimateTechHub thank you for the fast reply so that means the router will broadcast a network and the wireless access points will broadcast a network simultaneously is this ok can the router work without broadcasting a wifi signal
@@FestusMuberuka Yes both can broadcast a wifi signal or just the wireless access point. The access point (WAP ) gets IP addresses through the router DHCP pool. All IP addresses are on the same Network unless you install 2 separate routers with 2 different IP Network addresses.
Please help me , I have WiFi , I have another router transformed an access point , but the Browser in labtop give me this message (this connection in not private ) , but when I close this router (access point) , the search engine work well with not this message , what solutions please
Not possible. It's probably your router or switch. Have you reset your network devices? Unplug everything and plug it all back in. Give it about 5 minutes to go back online.
Hello, I run a business and have up to 30-40 phones on a 2.4ghz network in a close proximity. What is the best option to keep a decent speed and lower or eliminate the disconnects?
Access points are not installed by ISP providers. You will pay a monthly fee for your ISP service. You will have to install the Access Points or hire someone to do it for you. I have many videos on how to install Wireless Access Points so you can probably do it yourself. Some access points require a yearly subscription for advanced features like cloud management. I hope this helps. Thank you for watching.
@@jamesadeniyialimi3657 That depends entirely on your internet provider. not all providers are available in all areas. You'll need to see what's available in your area and what plans they offer.
I dont pay any subscriptions for my RUCKUS switch or AP. But I do like Unifi systems. If I make a change it will be Unifi. Thanks for watching and for commenting!
This video wasn't intended to show the installation but more of how WiFi access points work. I can make another video that shows the installation. Thank you for watching!
@sudheernorway Yes this was an old video and I hardly ever use music anymore. If I do it's barely noticeable. Sorry about that. Thank you for watching.
Hi guys, we hope this video helps you fully understand Wireless Access Points and the best locations to install them. Thanks for watching!
I don’t understand, does the ap need to be connected to the wifi or it can work connected to all LAN ports on wall of my house?
@@fedeeffe8584 The AP can be connected to a switch that's connected to the router. Also if you are using the AP with a PoE connection it has to connect to a PoE switch or PoE injector that then connects to the router. Hope this answers your question and thank you for watching!
@@UltimateTechHub yeah i have no idea, i just have a lan port on my wall and hopefully it will work connected to my ap.
It's a big help to me because my work connects an AP to the weak signal in the office,,
You can skip the first 2 minutes and you still won't miss a thing...
Thanks mate
How about a video on Access Point in separate building I.e. detached garage apartment, and thank you for our videos so far.
Some APs such as Ubiquiti come with POE injectors, so POE switches may not be necessary just use the POE injector that comes with the AP.
Absolutely if your AP comes with the injector then its even easier. My APs don't have that feature. Thank you for watching and if you subscribed thank you as well.
Hi, great video! I was trying to clarify something that I didn't get answered in this vid. I have a large rambler house and I need at least two wifi network broadcasters, right now they have different SSIDs and I need to switch manually between them because devices hang on to the connection with the weaker signal even if it barely has a bar. I'm looking at upgrading my system, will access points handle automatically switching your device to the stronger wifi signal and all be on the same SSID? So I'll probably need two access points connected to a regular rouater?
Dude spent 2 minutes trying to explain why I should watch his video and completely lost me by that point. Instead of just getting to the point right away and explaining everything within those two minutes.
Comprehensive explanation for both home and enterprise configurations.
This is how to install a WAP.
ruclips.net/video/OWgLPZEDcqc/видео.html
Love this channel. My antidote for Netflix addiction! Lol
That's the first time I've ever heard that! Lol!
Thank you for watching and for the kind words!
Thank you for the video!
Do you think this would work with existing ethernet ports? I rent, so I don’t really want to put a hole through the ceiling in my apartment, but we don’t get internet upstairs.
There are many existing ethernet ports and coaxial cables upstairs though.
Probably. it depends where the ethernet goes behind your walls.
Hello i have a question.
I have a modem that is both router and modem.
If i connect the AP to my router in router mode do i still have firewall ?
Yes it should have a firewall in the settings menu.
Silly question. What happens if you put a wifi6 AP in your ceiling and wifi5 in wall? I'm guessing they will still use the same SSID and switch automatically but you will be limited by which AP your are currently connected to?
Exactly and that is what I have. My old router is wifi5 and my AP is WiFi 6. FYI I use the AP almost all of the time. Its very fast and reliable. Thank you for watching I really appreciate it.
Very well presented, subscribed .
Thank you for watching and for subscribing I really appreciate it.
Hi there, is there a bracket for new construction? So the bracket is flush with the drywall.
Sounds great!
Question - I have wiring throughout the house, and a router in the closet
I want to set up an access point to a wired connection in a bedroom to increase coverage of the existing network
I am not trying to use an ‘extender’ that just rebroadcasts a wireless signal - I want to take advantage of my wired Ethernet throughout the house
Is an access point what I’m looking for?
did you get an answer?
These are good, but most people dont want to run cable to AP. It's easier to install repeaters in the outlets
Do repeaters cut your wifi speed in half? I rent and I’d like to get full wifi coverage but I don’t want to lay a wire?
I don’t understand, does the ap need to be connected to the wifi or it can work connected to all LAN ports on wall of my house?
The AP can be connected to a LAN port in your house but it needs a PoE connection unless your AP has a DC power connection then a typical LAN port will work. My Access Points use PoE so I don't need the power supply for the AP its one less wire to get in the way. Hope this helps and thank you for watching!
I have a reolink nvr for my security camera system.Can i connect a wireless access point to an unused poe port?
thanks for sharing
Thanks for watching!
awsome video man thanks
Hi, tq for your sharing.I have a aruba AP connected from a hub, the connection is like this : layer 2 switch to hub to AP, I don't understand why I cannot get my wifi if I connect AP to the hub but no issues if I connect directly between AP and layer 2 switch.please advice. Thank you.
Hubs do not work for this setup. Remove the Hub and replace with a unmanaged switch. Problem solved. Thank you for watching I really appreciate it.
what should I use for my house very large 3500 Sq ft and a back house and I'm trying to use simplisafe wireless cameras and I can't get a good signal ?
Add a TP-Link or Netgear AP. I have a few of them in the description that you can purchase. Keep me posted.
Hey Mike, if i plan on hardwiring all of my acccess points, wont that eliminate the concern for those waps communicating to each other across the home??? So basically any of them will be good to go?
Absolutely
@@UltimateTechHub thank you for the timely response!! Im laying out my list of components, i do most of this work day to day, just not with networking cables. I am anxious to get it all done at the new place
@@HardHeadMilitary What brand access points are you getting!
I have been leaning towards the ubiquity stuff, but my buddy who works for a high end, home automation company swears by Araknis… so i may just go that route..
I am planning on a 15u rack, with patch panel, switch the whole 9 yards
I am hardwiring all tv areas, the waps, 4 ip security cameras (1440p), and maybe setup for the savant home automation equipment while i am at it.
I would like to tell you, I enjoyed the video, and subbed. It is good content!
thank you
I'm using a Netgear AX3200 as an access point. How can I merge the SSID with my router's network to avoid having two separate SSIDs with the same name?
Use the same 2 names with the exact same security password and protocol. It should work.
Thanks for the knowledge, very helpful 👍
Would you recommend the Netgear WAX214? I have a 3300sq ft home. It is currently being built so I don’t know the dead zones. It is 2 story. My plan is to purchase 3 of them and space them out evenly from left side to right side of house and mount them on the ceiling of the second story to push signal down. I feel that 3 is more than enough hopefully. I only have spectrum cable so I wont be getting crazy speed just want to have the coverage for future proof when speeds increase.
That's a pretty good plan. I have the Netgear WAX630 AP and it covers 3500 sqft which is usually plenty for most homes. And with this model you can wirelessly add more AP into a Mesh network configuration. If you are building your home make sure to run cat6 to every room and I would run 2 cat 6 to every room. And also run cat6 to your future access points locations for the PoE connections. Also install a network panel so all of the cat6 meet up at that one area where your modem is installed.
@@UltimateTechHub yes I had planned to run cat 6a also to all the main rooms bedrooms/living rooms. But may I ask why 2 to each room? My plan at first was to put my router in the main living room but then I started looking into the POE access points and thought this was a way better idea and not so much of an eye sore being they are white and will match the ceiling. I do have an 8 port Netgear poe+ switch coming in as well for the access points. I know I would want my main tv source and main computers hard wired but the other hard lines are more for just in case. Just wondering why 2 in each room? I will also have the 4k defender series 8 camera installed. Which those aren’t using ethernet just hooked to it for online access. I had planned to put everything in the downstairs pantry as it is the most centralized location and isn’t a hot area like the attic.
Also will the signal be ok mounted on the ceiling of the second story for downstairs access. I feel it will be but not sure. I live in a 2 story now and some areas upstairs are spotty with the wifi signal. The router is a Netgear R7400 AC2600. It is located downstairs on a bookshelf about chest height.
@@idlesquirrel The reason you should have 2 Cat6a lines is for expansion and just incase 1 cat6a fails you have a backup. Also that extra cat6a can be used as wall fishing tool to run additional wires like coax or speaker wires or more cat6 cables. The only downside is the extra cost of the additional cable. And the pantry location is fine as long as its not hot and its secure from any issues like kids or animals. You may want to run a cat6a to your front door for a ring doorbell or another brand. The ceiling mount is good for the upstairs but an additional access point should be mounted in the ceiling of the downstairs. I had this situation in my old house and the Wi-Fi was not consistent downstairs especially with lots of users. The access points can be setup as a mesh network and will work together for fantastic wireless coverage. I'm not familiar with the Netgear R7400 AC2600 but it probably only covers 2000 sqft and a 2 story will most likely have some dead zones depending on the routers location.
@@UltimateTechHub thank you for the help and advice!
@@idlesquirrel !Anytime, thanks for watching and if you subscribed thank you as well. Also check out my Ultimate Home Networking Playlist for more than 50 videos that can help you get everything setup. Have a great day!
Thanks 👍💖👏
Great video! Question, I have the same ruckus AP in living room coming from closet set up as you. I want to get a better signal outside in my backyard. I already have Ethernet cable I ran from the ruckus in the closet to an outdoor tv and other items running through a netgear switch outside . Can I install another AP coming out of the netgear switch? Or would you recommend another method. Don’t really want to spend a fortune on another ruckus just to get a little better Wi-Fi outside if I don’t have to. Thanks!
You could just install a cheap Mesh Wi-Fi system that has 2 or 3 nodes. You would install the main Mesh Node where your wireless router is via a LAN port from the router then set up the mesh wi-fi with the required app. Then place the other 2 nodes, maybe 1 or 2 in your backyard under a patio for weather protection. That would solve your wireless problem. Here is a video I did on a cheap mesh wi-fi system. ruclips.net/video/2SWS8F3HvtU/видео.html
FYI- this giveaway is already over. But we are going to giveaway this exact mesh system in November or December to a lucky Ultimate Tech Hub viewer so keep an eye on our channel for further details. Thank you for watching I really appreciate it.
Really helpful, i hope to win!!
The giveaway was last year. We will do another giveaway in a couple of months. Thank you for watching!
The POE is only used for power not for the data like Ethernet/LAN cable?
It's used for both. Power and data. For example, my PoE wireless access point gets power and data from the Cat6a ethernet cable that's plugged into my ruckus PoE switch. Thanks for watching!
@@UltimateTechHub what if i use it only for power and use wifi signals to get the internet
Actually i am wroking on building up a private wifi netwok with lora network i want to connect lora gateway with wifi extender then wifi extender to long range Wi-Fi in order to cover 50Km distance
@@Storiez_by_sal I would use the PoE for data and power. PoE is faster and more secure. Wireless is less reliable, less secure and not near as fast.
Thanks. Great job. I'll be having a Samuel Adams after I set this up.
The Summer flavor is outstanding!!! Cheers!!
Hi .... amazing video, I have a question: I have the orbi ax6000 2 pack but in my 3 store house I have bad connection downstairs, also I need Vlans, for that reason I was thinking to upgrade to the orbi ax6000 Pro , or the aruba insta on, I already know the orbi, only thing it is too expensive, the aruba is more economical but my question is how this wap works when you are streaming 4k movies plus kids playing Xbox and Nintendo plus browsing at the same time? .... the orbi handle all, but how is this waps work , are they good ( I have high speed internet 1gb) thanks for your help
These waps use mu-mimo technology and the newer wifi6 waps are even better with handling multi users and high bandwidth usage. I have 1 gig internet and my wap handles many users streaming movies and games.
@@UltimateTechHub nice, my last question my friend how I can connect one of this wap to Surveillance system that use only rj45, in my case the orbi has a the 5more than 4 Lan ports on the satelite that I use for my Nvidia and the cameras, Nvidia has wifi connection but my Surveillance system doesn't any advice to connect system to the wap, is there any wap with lan ports? Thanks
Thanks. I appreciate your informative VID. Two comments, unless I missed it, I am looking for a recommendation from an expert on an outdoor Access Point. General comment, I would recommend not constant referral to "guys", I know that is generic, but as a woman, I felt a little offended/left out - no big deal, personal bother.
Great point! Sorry it's just how I speak! I call my mom and dad guys when I text them! Outdoor access points are installed the same way just install them under a patio or some sort of cover to keep the rain off it. Thank you for watching e.k.sanchez.
Not a problem - just old school! Hey, listen guy, are you suggesting that I MAY be able to use a regular Access Point (not specifically outdoor) outside if I keep it under a patio, or cover? If so, or do you have one in mind that you strongly recommend? Thanks.@@UltimateTechHub
@@e.k.sanchez I would use an outdoor AP because they are built for extreme weather situations. Netgear makes great outdoor APs just do a quick internet search. I can't recommend any specific AP because I haven't installed any. Sorry Gal!
can or is it a good idea to replace my wifi router with a wired router and using an ap or 2
Is this comparable to just a wifi extender that you plug in an outlet?
No, Wi-fi Extenders are not as reliable and fast as Access Points. Access Points are designed for High Throughput and 100s of devices. Extenders are not designed for that. Get an access point you wont be sorry. Thank you for watching and if you subscribed thank you as well.
High techhub, I'm wondering if adding another Access point will increase bandwidth and allow more devices to connect than say if I only had one router.
Essentially will an additional router uses for an AP be able to allow say 20+ more devices to connect.
This acces point will work perfectly for your needs. Check out my video I just posted.
ruclips.net/video/HaFEwhxU-6A/видео.html
Keep me posted on what you decide. Thank you for watching.
How do i use ap in a mesh connection
I need to bury ethernet cable to my shed 100 feet away from the router. How much loss will I see in this distance? what is the range of a AP?
Zero loss at 100ft. What kind of cable are you using? Make sure it's rated for outdoor use and bury the cable in some kind of conduit like PVC pipe. You may want to bury 2 cables in the same conduit incase 1 cable fails in the future.
Good luck and keep me posted!
does the ap brand need to match the router brand?
No, the brands can be different! Thank you for watching!
I have a router given to me by my isp and my plan can bad up to 9 devices 300up and 30 down, can I allow more devices by adding an access point and adding devices on there?
Yes but you do need a PoE connection. So you could plug a PoE switch into your router then connect the access point to it. Otherwise you can just add a second wireless router to your main router. Here is a video I made on that subject
ruclips.net/video/qpcWucapIRg/видео.html
Keep me posted and thanks for watching.
Yea I did this before with an actual router and connected my Xbox to it and I got a Doublt NAT problem, how can I fix the double NAT
Hello
I had a question, please help
If i use the Access Point TP-LINK TL-WA801ND_V1 Wireless N300 And use an outdoor parabolic dish instead of access point antennas, to send the Wifi 2400 MHz frequency, how far can I receive the frequency 100% without loss of quality ???
Is there an access point that I could use for my guest of my house that would only allow internet access. But no local area access on my home network; maybe just my printers?
With most new Access Points you can block local access to pcs and printers. I recommend Netgear access points. I use the WAX630. How fast is your ISP speed?
@@UltimateTechHub I have Xfinity Internet XFi Advanced Gateway XB7 and I get 695Mbps Upload/ 23.4Mbps download wired
279.8Mbps Upload/22Mbps Download wireless and 365.2Mbps Upload/ 22Mbps Access Point.
I have a Netgear 6 AX1800 Access Point WAX610. I don't see a setting to the access point to limit access to only internet. And I don't see a setting on the Gateway to set the Access point to internet only. I did set on the Gateway to have a static ip on the Access point. I have a Netgear ProSafe 24 port gigabit switch JGS524; this has a connection to my access point.
@@tomm1359 In the Control Panel, click Network and Internet and then Network and Sharing Center. Click Change advanced sharing settings and then choose Turn off file and printer sharing. This should work. Keep me posted.
@@UltimateTechHub Thanks for responding back to me. I appreciate it. I understand what you are saying. But I would like to know if there is a setting I can make on my router or access point that will prevent my guest (to my house) from them preventing on getting on my local network.
I leave my file sharing unprotected so guest could possibly delete complete directories on my network. I would like to just give them the SSID and guest password. And even with their PC with advanced files sharing ON, they could not get on my network. I guess I could put passwords on my pcs on the network. But, it is easier not to put passwords on my pcs. Also if I put passwords on my pcs, I don't think my smart tvs will be able to access Videos on my network. I know on my previous netgear router they have a SSID that you could configure as a Guest Access that would allow only internet access. But now I have to use the Xfinity Gateway (Modem/Router) XB7.
@@tomm1359 The local network settings really depend on which brand router and access point you have. Best option is the guest access on the wifi. My netgear guest access blocks access to pcs and personal data. Hope this helps.
Having all this installed on my new home that is being built
Fantastic! Enjoy! If you have any questions feel free to ask.
Great job. 👍
Is a wireless access point the same as a wifi booster?
No.
can you run ethernet form modem to network switch directly no router in between and wi-fi comes from access points connected to switch
No, you need a router to hand out IP addresses for the Network using DHCP and also a firewall and security. A switch can do none of those things.
@@UltimateTechHub thank you for the fast reply so that means the router will broadcast a network and the wireless access points will broadcast a network simultaneously is this ok can the router work without broadcasting a wifi signal
@@FestusMuberuka Yes both can broadcast a wifi signal or just the wireless access point. The access point (WAP ) gets IP addresses through the router DHCP pool. All IP addresses are on the same Network unless you install 2 separate routers with 2 different IP Network addresses.
Please help me , I have WiFi , I have another router transformed an access point , but the Browser in labtop give me this message (this connection in not private ) , but when I close this router (access point) , the search engine work well with not this message , what solutions please
3 of my Ruckus R510 die at the same time today, is that possible?
Not possible. It's probably your router or switch. Have you reset your network devices? Unplug everything and plug it all back in. Give it about 5 minutes to go back online.
Are AP's same as extenders?
No
Hello, I run a business and have up to 30-40 phones on a 2.4ghz network in a close proximity. What is the best option to keep a decent speed and lower or eliminate the disconnects?
I have the same issue also, hope he answers.
basicly its a mesh system?
@maxfeng-w8o Yes in a way.
JUST GET TO THE POINT (no pun intended) skip to 2:00
Yes I tended to ramble a bit too long back then ( 2-3 years ago ) My videos are much shorter and right to the point. Thanks for watching.
How much is it and how can I get it install with internet provider for monthly payments? I want unlimited subscription
Access points are not installed by ISP providers. You will pay a monthly fee for your ISP service. You will have to install the Access Points or hire someone to do it for you. I have many videos on how to install Wireless Access Points so you can probably do it yourself. Some access points require a yearly subscription for advanced features like cloud management. I hope this helps. Thank you for watching.
How much is the monthly ISP service fee or yearly fee
I have access your videos and I can do same to it. Kindly help me with the total cost for purchase and monthly fee or yearly fee
@@jamesadeniyialimi3657 That depends entirely on your internet provider. not all providers are available in all areas. You'll need to see what's available in your area and what plans they offer.
Gladyce Coves
What of dahua ap
Why do you use Ruckus instead of Unifi? Unifi doesn't charge you a subscription to get all the features
I dont pay any subscriptions for my RUCKUS switch or AP. But I do like Unifi systems. If I make a change it will be Unifi. Thanks for watching and for commenting!
I was here
I want one
Our 200th video will be out by Wednesday so check it out and leave a comment to enter the drawing! Thanks for watching!
Well, I guess i am 2 years late for the giveaway
Lol. Yes. Sorry. We have giveaways every 6 months so keep an eye out.
Thanks for not showing how it's installed.
This video wasn't intended to show the installation but more of how WiFi access points work. I can make another video that shows the installation. Thank you for watching!
2mins of blah before starting
i'm out - background music too distracting and annoying
Sorry, my older videos were not edited very well. My newer videos over the last year or two have no music. Have a great day.
back ground music dominates your teachings...!!!!
@sudheernorway Yes this was an old video and I hardly ever use music anymore. If I do it's barely noticeable. Sorry about that. Thank you for watching.
Why do I need to watch this video, you never suitably explained.