It was on 425 for a while with both kits turned on. No cage, full interior, on pump E85. For a legit nitrous street driver it was fast. It went 5.60’s on no prep.
That is WHAT I LOVE ABOUT YOU!!!! LEGIT STREET FAST ON LITTLE CASH. KNOWLEDGE ALWAYS WINS. Love the SRC family; you guys prove that hard work truly pays off. When you don't have cash........you have extra effort. And Extra Effort will always beat cash.
Man bill i bet Vicky tells you sometimes when its just you two that yalls boys have grown too be just like you and yall are so blessed to be the family yall have become i really just want to come over and hangout with yall and race rc trucks around
The old man has spent your entire lives teaching you boys and has done an outstanding job doing so. Now comes an opportunity (Honor) to bond and impart some of your knowledge to him in return. Grab it and run. My old man never wanted me or anyone teaching him a dam thing he knew it all,All you had to do was ask him. Bill Sr. Good on you sir for being willing to learn from the young guns.
Jeff just wanted to say thank you for being a girl dad and teaching life skills that will save her time money headache and her life. As a daddy girl I say thanks! Tommy don't let the haters get to you they are secretly your biggest fans outside of your mom and probably are the ones who buy the most merch haha so let em hate thank them and be proud that you've got something great enough for someone to find time to talk about.
I absolutely love everything about this video! The old man being down with the EFI is above and beyond! I love that this bad ass sexy truck has turned in ts complete family project ! People can say that Tommy gets forgotten it seems to me that you Tommy have brought this family to a new better level !! Love all three channels and relate and respect the dynamics so much !!
Tommy is a only 20 years old. But to watch him drive a race car you would not think that. He is a wheel man and with that being said he’s now learning how to wrench on them cars. These two young men show up to race you have to take notice.
Check your alternator drive ratio on the FALCON; if an alternator exceeds roughly 16,000-rpm it can drop voltage from the brushes bouncing. Generally speaking if your crank pully diameter is any bigger than 2X the alternator pully's diameter you're getting very close to the danger zone for brush bounce just prior to the shift (given your running the engine to 7200-rpm like I've seen in some of your "in-car" videos).....This may not be the full reasoning / cause of your issues, but if your alternator is worn / has a diode out, it definitely could be.......and slowing the alternator down has a benefit of it lasting longer under hard use / charging more stable down track if it's running at a more efficient speed (ex: basically all alternators reach there maximum output by 6000-alternator-RPM, which would be only 3000-RPM engine speed with a 2:1 drive ratio, so it doesn't take much speed to have good charging)......the same could be said for Billy's truck, with it's 18V system; as lot of higher amp-output / voltage alternators have lower max RPM limits before brush-float can begin to occur, yet also higher minimum rpm before full output can be achieved (check out the amperage vs. RPM chart on Balmar Charging Solution's website, it provides a good range of alternators to compare yours & Billy's against to better show what I'm trying to articulate in text).... Keep up the good work 👍
Tommy’s S10 is badass! Looking forward to seeing it completed! Dart is looking damn good, looking forward to seeing Allison behind the wheel again! Keep up the great work you two!
I am an Old man and all I can say is Ya gotta Love all of you Guys! At the least I find you very intertaining. Enjoy your youth and live life to its fullest!
I really enjoy all 3 of y'alls channels. The S10 is going to be really nice when y'all are finished with it. Thanks for all the hard work & great content!! I can hardly wait to see the Dart making some hits. I love the old Mopars, especially Jeff's Challenger. It is absolutely gorgeous!!
You kids are awesome, I wish more of your generation was like you all. Keep the videos coming, can't wait to see the s10 and looking forward to see the dart come out.
I just love how everyone in the family has their own channel, old man billy and tommy just nice to see it as a family thing. Think that's why I'm such a big fan of you guys!
I liked the sit down session with you on camera. You have a way with the camera with your calm demeanor and way of clearly expressing yourself. Nice job. Keep it up.
I love me some Tommy and Allison content. Be patient. Be focused. And most of all be true to yourself. Times are constantly changing. Focus on 1 goal at a time.
Glad to see update on s10 and the dart plus seeing everybody back jeff allison and the shop supervisor! I have missed everybody ! keep working hard guys! I needed a little Mopar love! GOD BLESS GUYS! Y'all are killing it with the videos and the editting! Let Allison organize your tool box Tommy!!👍
Yes let Alison organize it,it will make you life easy, but you have to keep it organized.Organization is key to production in the garage,and as Jeff says races are won in the garage.....lol Glad to see your getting the truck moving along!! and the darts coming along well!!
Glad the truck is getting some love and will be back racing! Take your time with it and do it right. Glad you and Billy will have a front side vehicle and a back side one also. Can't wait to see Allison's car done and her driving it. Keep up the hard work to all of you. Sending love from Eastern, NC.
Tommy I never get tired of ya talking keep it up. Thanks for all the insight on all y'all do and are doing. Yins channel is absolutely amazing from the family and friends to the educational side of it . Y'all are great folks could not ask for better people . Keep it real , keep it's safe and keep it fast. Can't wait to see what's up next. Thank yin's.
I could never get tired of watching that falcon my dad had an old falcon Chevrolet powered when I was a kid and I've always loved them especially with a Chevy in them
Great video and content. Hats off to you Tommy. Your progression of knowledge and experience in racing has really came on strong in the last 12 months. MAD RESPECT FROM NORTH CAROLINA
I'm looking forward to the build an seeing you guys make the truck great again. I love working on trucks an making them go fast I wish I had a dad like you guys do bring it your family is amazing
The absolute best video out of all of the ones your family has posted. Your an intelligent young man Tommy. Very happy for all of you. God bless you and your family
I love that truck. Tommy this was the best you’ve ever presented yourself. I wasn’t your fan early on after you got the falcon but I’ve come to realize your somewhat like younger me. Not as socially proficient as your brother and that’s ok. Just remember be humble be grateful but also you probably earn a lot of the pride you have in your contributions to src. You got a jam up pop and good dude for a big bro. Okay semi-old man rant over. Morale of the story not that it matters but your growing on me. Y’all are the all American family a lot of us wish we had and that brings more views than those sweet chevys and black sheep ford.
Tommy can’t wait to see what U & Billy Do To Your S10 & can’t wait to see what all is done with Allison’s Dart , Us Your Money Wisely on The Truck. U & Billy Doing a Fantastic Job Racing lately!!! Fan from Lake of the Ozarks, Missouri
Between Big Rob and Billy. You easily can build it yourselves. All the other cars seem to be running so with a little attention it shouldn't be long. Nice racing in the Falcon. You've got it figured out.
SRC family rocks, and it's so cool to see you'll pull together and make things work!!!! I vote all three channels the best thing that y tube has ever put out family tradition!!! Love you all and keep kicking that azz!!!!
I love how your mom is in your phone as A mom for it to be at the top of the contacts list I did that with my mommas number too. Lol funny how moms think alike
That's not going till happen till next season. Work on the dart is a lil slow. They started working on the dart at the end of last season an it's not looking like it's going to be done within the next 2months
That was a Great 👍 Video Always appreciate your time and content Allison's Dart is coming along, Allison is always pitching in to help Jeff is very talented Tommy and Allison Very impressive and very informative Thanx and Have a Great Day 👍 God Bless America
Can't wait to see the entire process! Everyone in your circle is an inspiration for a lot of us to get out and get after our own projects. Can't wait to see what all of you accomplish in the future! I think you should call the extra stuff to get those back tires off "Falconry".
Tommy you’re very talented and you seem to honestly LOVE racing and yes you definitely have to be serious to be safe but just don’t stress things to the level that takes the FUN & SATISFACTION out of it. Great to see the S-10 going back together, and lord knows she’s definitely one of the year models and color that makes it a beautiful hot rod.
Keep your head up, Tommy. You are doing an amazing job on the videos. The rest will come with time and effort. Tuning a car doesn't define you. There are tons of drivers out there who have to hire others to tune their cars, so don't feel like you are behind or lacking. You get the car from A to B with success while staying competitive. The car doesn't drive itself!
Plans for your truck. Just put something that has about 1500hp in it. And beat the snot out of it till it's twisted like a pretzel and the converter bolts are falling out of it. Then by next year you can win cash days. 😆 that was a great show y'all put on by the way. Good job guys.
@@hollowpoint357sw4 with Billy's truck they got that little thing twisting so hard off the launch that I don't think loctite would help much. I don't think they're backing out. I think they're being twisted and ripped out. Like wringing out a wet dish towel. The whole truck is twisting. You could probably tack weld them and they'd still come out. I think they need to stiffen the truck a little more and put in a mid plate.
Wow haven't seen this much of the s10 in years it feels like. Pretty cool to see some of in and can't wait to see it in action again. I liked watching both trucks going down the track. I wish I would have recorded some of my old runs, wins, and passes. Perhaps thats what keeps me here, reminiscing on the old days and the great content along with awsome people. Looking forward to the next as always
Billy better keep an eye on those upper control arms. That was funny when he brought them things in and showed the old man. I'd check for cracks between the holes. Hell I didn't even realize he actually used them. I love it though
Thanks for the update Tommy Allison and Jeff. Tommy let Allison organize your new toolbox. Then you can give a toolbox tour video. Stay safe and well Artie 😊
Tommy you have done a incredible job be safe mainly but be patient good things are coming your way when you are Honest and Loyal Good things will come look how far y’all have came in the last year Love the content and thank you to you and your crew for all the hard work
Glad to hear about the new engine going together for the Falcon. I’ve been super impressed by the durability and reliability of the existing combo! Also appreciate the updates on the S10 & Dart. Be safe & have fun everybody!
Wow Old Man that was such a humbling experience to hear when at 11:38 you said to your boys you would Love for them to teach you something ( the EFI) . Much love to You and your family.
Yes Allison organized Billy’s tool box !! Don’t tell him it better to ask for forgiveness then to ask for permission!!! And Billy would you rather be right or a happy happy man ?
Tommy you should convince Billy to paint his S-10 the same shade of blue that yours is so they match. Your competition will always be guessing who they are going up against.
Yeah i agree Tommy you should get in there and practice and start welding on your own truck thats what makes you grow love for it because you actually put your blood,sweat, and tear into it. your good with camera and computer but man your a hell of a driver so you can do whatever you put your mind too . Just remember put your mind too it. Get er done lets see it man
It was on 425 for a while with both kits turned on. No cage, full interior, on pump E85. For a legit nitrous street driver it was fast. It went 5.60’s on no prep.
That is WHAT I LOVE ABOUT YOU!!!! LEGIT STREET FAST ON LITTLE CASH. KNOWLEDGE ALWAYS WINS.
Love the SRC family; you guys prove that hard work truly pays off. When you don't have cash........you have extra effort. And Extra Effort will always beat cash.
Man bill i bet Vicky tells you sometimes when its just you two that yalls boys have grown too be just like you and yall are so blessed to be the family yall have become i really just want to come over and hangout with yall and race rc trucks around
Also old man where has Kenny been you haven't spoke much of him in your last videos?
@The Old Man's Garage did it have stock block and what cubic inch if ya don't mind me asking
6:45 I hope that never happens
The old man has spent your entire lives teaching you boys and has done an outstanding job doing so. Now comes an opportunity (Honor) to bond and impart some of your knowledge to him in return. Grab it and run. My old man never wanted me or anyone teaching him a dam thing he knew it all,All you had to do was ask him. Bill Sr. Good on you sir for being willing to learn from the young guns.
I was thinking the same thing it takes a real man to do that.
You bet.
Absolutely every days a school day. It's good to learn all the stuff off the younger generation because it's their thing
Tuck the rear wheels in more in the rear
Billy; "Its got the carolina squat"
Tommy; "I know that's whats bugging me"
You guys just made my day with that.
That's the Aynor squat! lol
Tommy, you are one of the best drivers I've seen out there and under estimated ,I think you are headed for greatness and thanks for taking us along
Jeff just wanted to say thank you for being a girl dad and teaching life skills that will save her time money headache and her life. As a daddy girl I say thanks! Tommy don't let the haters get to you they are secretly your biggest fans outside of your mom and probably are the ones who buy the most merch haha so let em hate thank them and be proud that you've got something great enough for someone to find time to talk about.
Got to give you and the family credit. You gotta admire the family and there lineup of cars . So badass !!
I absolutely love everything about this video! The old man being down with the EFI is above and beyond! I love that this bad ass sexy truck has turned in ts complete family project ! People can say that Tommy gets forgotten it seems to me that you Tommy have brought this family to a new better level !! Love all three channels and relate and respect the dynamics so much !!
Tommy is a only 20 years old. But to watch him drive a race car you would not think that. He is a wheel man and with that being said he’s now learning how to wrench on them cars. These two young men show up to race you have to take notice.
Tommy is the bomb. 👍🇺🇸
Check your alternator drive ratio on the FALCON; if an alternator exceeds roughly 16,000-rpm it can drop voltage from the brushes bouncing. Generally speaking if your crank pully diameter is any bigger than 2X the alternator pully's diameter you're getting very close to the danger zone for brush bounce just prior to the shift (given your running the engine to 7200-rpm like I've seen in some of your "in-car" videos).....This may not be the full reasoning / cause of your issues, but if your alternator is worn / has a diode out, it definitely could be.......and slowing the alternator down has a benefit of it lasting longer under hard use / charging more stable down track if it's running at a more efficient speed (ex: basically all alternators reach there maximum output by 6000-alternator-RPM, which would be only 3000-RPM engine speed with a 2:1 drive ratio, so it doesn't take much speed to have good charging)......the same could be said for Billy's truck, with it's 18V system; as lot of higher amp-output / voltage alternators have lower max RPM limits before brush-float can begin to occur, yet also higher minimum rpm before full output can be achieved (check out the amperage vs. RPM chart on Balmar Charging Solution's website, it provides a good range of alternators to compare yours & Billy's against to better show what I'm trying to articulate in text)....
Keep up the good work 👍
Tommy’s S10 is badass! Looking forward to seeing it completed! Dart is looking damn good, looking forward to seeing Allison behind the wheel again! Keep up the great work you two!
Far Out!! I've been patiently waiting on your S10 build.
That's a good looking S10 Tommy
I am an Old man and all I can say is Ya gotta Love all of you Guys! At the least I find you very intertaining. Enjoy your youth and live life to its fullest!
Tommy is so humble need more like him and Billy
Hi Jeff he's already on gen 2 garage doesn't need to stretch himself thin thats when the stress starts
I really enjoy all 3 of y'alls channels. The S10 is going to be really nice when y'all are finished with it. Thanks for all the hard work & great content!! I can hardly wait to see the Dart making some hits. I love the old Mopars, especially Jeff's Challenger. It is absolutely gorgeous!!
You kids are awesome, I wish more of your generation was like you all. Keep the videos coming, can't wait to see the s10 and looking forward to see the dart come out.
I just love how everyone in the family has their own channel, old man billy and tommy just nice to see it as a family thing. Think that's why I'm such a big fan of you guys!
Tommy, you have such a good demeanor. With a good attitude. Things can only get better. Good attitude , and a good heart. Like your Mother. 👍👍👍👍👍
I liked the sit down session with you on camera. You have a way with the camera with your calm demeanor and way of clearly expressing yourself. Nice job. Keep it up.
Dont forget you got uncle bucko helping now too and Jeff, you guys are like the dream team.
I love me some Tommy and Allison content. Be patient. Be focused. And most of all be true to yourself. Times are constantly changing. Focus on 1 goal at a time.
Excellent advice
Glad to see update on s10 and the dart plus seeing everybody back jeff allison and the shop supervisor! I have missed everybody ! keep working hard guys! I needed a little Mopar love! GOD BLESS GUYS! Y'all are killing it with the videos and the editting! Let Allison organize your tool box Tommy!!👍
Yes let Alison organize it,it will make you life easy, but you have to keep it organized.Organization is key to production in the garage,and as Jeff says races are won in the garage.....lol Glad to see your getting the truck moving along!! and the darts coming along well!!
I see Tommy and Billy building race cars in the future
I absolutely loved the video I love watching Jeff's craftsmanship he's a true perfectionist keep up the good work the dart is going to be bad ass.
Thanks for watching man
He is doing a fantastic job on that Lil dart he is making it as safe as it can be built for her to learn in GREAT DAD STUFF much respect sir
Glad the truck is getting some love and will be back racing! Take your time with it and do it right. Glad you and Billy will have a front side vehicle and a back side one also. Can't wait to see Allison's car done and her driving it. Keep up the hard work to all of you. Sending love from Eastern, NC.
It is so good to see your family back together as a TEAM! Glad you all are together, happy and prosperous.
Tommy I never get tired of ya talking keep it up. Thanks for all the insight on all y'all do and are doing. Yins channel is absolutely amazing from the family and friends to the educational side of it . Y'all are great folks could not ask for better people . Keep it real , keep it's safe and keep it fast. Can't wait to see what's up next. Thank yin's.
Thank you for watching the channels man
I could never get tired of watching that falcon my dad had an old falcon Chevrolet powered when I was a kid and I've always loved them especially with a Chevy in them
The longer you let these S-10's sit in a garage the better they look! That's a really cool blue too.
Great video young man. Your really learning and we all love and support you guys.
Thank you!
Great video and content. Hats off to you Tommy. Your progression of knowledge and experience in racing has really came on strong in the last 12 months. MAD RESPECT FROM NORTH CAROLINA
Informative video and young brothers wise beyond your years ..I'm 42 and learn every post ...🇺🇸 🏁
I'm looking forward to the build an seeing you guys make the truck great again. I love working on trucks an making them go fast I wish I had a dad like you guys do bring it your family is amazing
Man that s10 is beautiful, I've been dying to see it in action again, especially with twins
I like Allison filming she stands still bill and Tommy can’t stand still I get dizzy sometimes lol it was also good to see the progress on the dart
The absolute best video out of all of the ones your family has posted. Your an intelligent young man Tommy. Very happy for all of you. God bless you and your family
You guys are such a great couple . Any content you all put out is worth watching in my opinion. Dart is looking sick
Get it done....the more race machines you guys have the more I get to watch....and get Allison's car done.i like watching her race 2.
Finally, Tommy`s S10 getting finished. Looks awesome. Jeff has been busting his ass on the Dart. Looking good Jeff.
Jeff - just the expert tip...
I love that truck. Tommy this was the best you’ve ever presented yourself. I wasn’t your fan early on after you got the falcon but I’ve come to realize your somewhat like younger me. Not as socially proficient as your brother and that’s ok. Just remember be humble be grateful but also you probably earn a lot of the pride you have in your contributions to src. You got a jam up pop and good dude for a big bro. Okay semi-old man rant over. Morale of the story not that it matters but your growing on me. Y’all are the all American family a lot of us wish we had and that brings more views than those sweet chevys and black sheep ford.
Doesn't matter what car or truck you guy's run we will watch this awesome family grow!!!!!!!
Man! I cant wait to see the Dart screamin down the track with all this work done it should be fast!
Tommy can’t wait to see what U & Billy Do To Your S10 & can’t wait to see what all is done with Allison’s Dart , Us Your Money Wisely on The Truck. U & Billy Doing a Fantastic Job Racing lately!!!
Fan from Lake of the Ozarks, Missouri
Thanks for the update on the truck, Dart and Jeff. Good luck this weekend and stay safe.
Between Big Rob and Billy. You easily can build it yourselves. All the other cars seem to be running so with a little attention it shouldn't be long. Nice racing in the Falcon. You've got it figured out.
SRC family rocks, and it's so cool to see you'll pull together and make things work!!!! I vote all three channels the best thing that y tube has ever put out family tradition!!! Love you all and keep kicking that azz!!!!
Can’t wait to see the fleet of cars that your family have together .Keep up the great work on your videos on all 3 channels 👍
I love how your mom is in your phone as A mom for it to be at the top of the contacts list I did that with my mommas number too. Lol funny how moms think alike
That truck looks sweet!!!
Glad you'll be getting your truck back together Tommy. Should be awesome photage to watch.
Good to see work being done on your S10 tommy that thing is sharp my favorite color and good seeing the dart getting closer to being done
I feel little bit bad for Alison, I know she's itching to start racing the Dart, hopefully it will be done before the season ends!!
So good to see the truck again and can't wait to see you race it again
Allison,you are getting very close to making passes with your Dart,I can`t wait.
Thank you for GEN II Garage. Sharing info that so many care ro know. Also the ones who just learned what they would want to know.
Need to paint the Dart like Jeff's Car same colors
Sounds like you have a good plan young man. Run with it!
Definitely let Allison arrange your tool box. Women are a thousand times more organized than we are!
pretty cool seeing the falcon in old videos before you guys owned it and seeing it make history now
When Jeff is done with the dart it going to be alot faster want to see Jeff in the dart and Bill in the Malibu ✌
That's not going till happen till next season. Work on the dart is a lil slow. They started working on the dart at the end of last season an it's not looking like it's going to be done within the next 2months
If you sell the falcon you will likely end up racing against it. Not a good scenario. Lol though Billy wouldn't be tuning it then.
Dude, I love this video. “The think tank” Good luck can’t wait to see this thing on the track.👍🏻🇺🇸🏁
It’ll be cool to see the blue S10 on the track.
Pro tips by Jeff f f f🤣
That was a Great 👍 Video Always appreciate your time and content
Allison's Dart is coming along, Allison is always pitching in to help
Jeff is very talented
Tommy and Allison
Very impressive and very informative
Thanx and Have a Great Day 👍
God Bless America
Can't wait to see the entire process! Everyone in your circle is an inspiration for a lot of us to get out and get after our own projects. Can't wait to see what all of you accomplish in the future! I think you should call the extra stuff to get those back tires off "Falconry".
The dart is going to be mint when fefffffaaffaaffaaa and you guys get done 👍 LoL 😂
it would be cool to see the s10 do something like drag week!
Man you have one nice s10, that thing looks so clean and awesome. I can't wait to see you getting some seat time in that beast.
i never get tired of seeing the falcon,but i'm looking forward to seeing the truck...keep up the good work 2guns..
Tommy you’re very talented and you seem to honestly LOVE racing and yes you definitely have to be serious to be safe but just don’t stress things to the level that takes the FUN & SATISFACTION out of it. Great to see the S-10 going back together, and lord knows she’s definitely one of the year models and color that makes it a beautiful hot rod.
S10 content will boost you tommy, its your turn to shine buddy!
THE S1O GOOD LOOKING TRUCK AND THE DART IS LOOKING GREAT YALL
I absolutely love that Falcon,looking forward to the S10. The Falcon is gonna scream.
Keep your head up, Tommy. You are doing an amazing job on the videos. The rest will come with time and effort. Tuning a car doesn't define you. There are tons of drivers out there who have to hire others to tune their cars, so don't feel like you are behind or lacking. You get the car from A to B with success while staying competitive. The car doesn't drive itself!
Plans for your truck. Just put something that has about 1500hp in it. And beat the snot out of it till it's twisted like a pretzel and the converter bolts are falling out of it. Then by next year you can win cash days. 😆 that was a great show y'all put on by the way. Good job guys.
They should use thread lock on those converter bolt’s. You can’t have them falling out in the middle of a race now can we.
@@hollowpoint357sw4 with Billy's truck they got that little thing twisting so hard off the launch that I don't think loctite would help much. I don't think they're backing out. I think they're being twisted and ripped out. Like wringing out a wet dish towel. The whole truck is twisting. You could probably tack weld them and they'd still come out. I think they need to stiffen the truck a little more and put in a mid plate.
Two purpose built sounds like the right idea.
Tommy she’s very clean can’t wait to see it done
You all have worked super hard for everything you have. Can't wait to see the truck rolling again.
Tommy's truck is clean .
Wow haven't seen this much of the s10 in years it feels like. Pretty cool to see some of in and can't wait to see it in action again. I liked watching both trucks going down the track. I wish I would have recorded some of my old runs, wins, and passes. Perhaps thats what keeps me here, reminiscing on the old days and the great content along with awsome people. Looking forward to the next as always
Great job guys and gals y'all are doing Great keep it up 👌👍👍💪🇺🇸🇺🇸 from Alabama 🇺🇸 watching 👍
Billy better keep an eye on those upper control arms. That was funny when he brought them things in and showed the old man. I'd check for cracks between the holes. Hell I didn't even realize he actually used them. I love it though
Tommys truck is the nice race truck! Billys truck is the backstreet bar brawler!
Thanks for the update Tommy Allison and Jeff. Tommy let Allison organize your new toolbox. Then you can give a toolbox tour video. Stay safe and well Artie 😊
“It is, what it is” and “shit happens” are two of my favorite sayings! Love ya 💕
Your family is awesome love watching the content you make. This is the way all families should be .
Looking forward to watching the build!
Tommy you have done a incredible job be safe mainly but be patient good things are coming your way when you are Honest and Loyal Good things will come look how far y’all have came in the last year
Love the content and thank you to you and your crew for all the hard work
Glad to hear about the new engine going together for the Falcon. I’ve been super impressed by the durability and reliability of the existing combo! Also appreciate the updates on the S10 & Dart. Be safe & have fun everybody!
Wow Old Man that was such a humbling experience to hear when at 11:38 you said to your boys you would Love for them to teach you something ( the EFI) . Much love to You and your family.
Double the pleasure double the fun keep up the hard work but it is about time to see the s10 back in the works
I really enjoy watching you guys learn and progress. Yall have come so far
Yes Allison organized Billy’s tool box !! Don’t tell him it better to ask for forgiveness then to ask for permission!!! And Billy would you rather be right or a happy happy man ?
Looks like Jeff fixed the hole in the spare tire well!
Tommy two guns is about to draw both pistols! Can't wait to see what the s10 does!
That’s a clean little truck 👍🏽can’t wait to see it back out
Tommy you should convince Billy to paint his S-10 the same shade of blue that yours is so they match. Your competition will always be guessing who they are going up against.
Man, I love those 10's. Yall keep pushing both of them. Their potential is way up there.. neither one has reache itt yet.
Yeah i agree Tommy you should get in there and practice and start welding on your own truck thats what makes you grow love for it because you actually put your blood,sweat, and tear into it. your good with camera and computer but man your a hell of a driver so you can do whatever you put your mind too . Just remember put your mind too it. Get er done lets see it man