I framed an entire basement 1400sqft. Using only this saw for cutting studs. With 2 5amp hour batteries I was getting through the entire day of framing. It was not as powerful as a corded saw for sure but it didn't really hinder production. It did stall here and there when I tried to cut too quickly, again was used to a 15amp corded skilsaw so I had to adjust my pace a little. I would say as a carpenter/remodeler, this saw is adequate for my work. It does lack a little power, but basically every cordless saw does. It was pretty pathetic for rip cuts through 2*4. Stalled out quite a lot unless you went very slow which was a little frustrating. The ergonomics are good, was comfortable using it all day. All things considered, I score it at a 8 out of 10.
FYI I read some reviews on Ridgid's website and people are saying they were having issues with cutting UNTIL they replaced the free blade with a Diablo and the improvement was night & day. Then I ordered one FOR ONLY $99! Thanks for the great vids!
Your video tutorial on this Ridgid brushless hammer drill is way more educative and superior than what I saw from Tool B. Your videos are precise and are highly professionally done. They are short videos and not boring at all. You actually include a lot of scientific talk in your tutorials. You match your talking points with practicals. So much like an engineering laboratory professor. I discovered your channel today and I have already learned a lot from you than I have learned from your competitor's junky videos. Only the Sparky Channel guy matches this level of sophistication. Because of your videos on this Ridgid brushless, I have decided to consider it a must buy this week but please answer this question for me ------ "Does tthe Ridgid Gen5X hammer drill overheat and then shut down?" Thanks a lot and God's Blessings to you.
+Chris Cape I use Milwaukee at work, and have bought these brushless ridgid tools (drill, impact and circular saw) for my personal use. They are the poor man's equivalent of m18 fuel. They are that good. Especially with the larger 4.0 and 5.0 batteries.
Got this brushless have both and I love it and have the brushed gen 5x kit but I wanted a brushless model too and just today they accepted my lifetime service agreement so thanks ridgid great review
Got one a week or so ago, but didn't have a chance to use it other than a very few end cuts. Yesterday at the job site, my corded circular saw which we were using to cut Richlite, bit the dust(so to speak). Using a new Dewalt 30 tooth general construction blade, started cutting and was blown away by the power. The battery didn't last though, but in fairness, as i've said, i'd used it a few times prior, so it wasn't a fair test, and i have plenty of battery's anyway(though it comes with the 4.0 amp hour battery if you get the full kit, which is worth it, for sure)as i use and love the Stealth Driver they make. For those not familiar with Richlite, it is paper impregnated with resin, used for counter tops, etc. It's super dense, very heavy, and the manufacturer insist that only a festool track saw should be used to cut it(heavy sigh). We were only sizing the material for handling and will make our real cuts next week once we can get back in the building. The real test will be then, and i most likely will be using a different blade. So far, my only complaint is the safety lock, it's hard for my arthritic hands, and the depth release lever(gauge is awesome and accurate)being on the motor side, and not between the blade and motor(which may just take some getting use to). It's also not light, though lighter than their corded model. Great review, thanks for it.
One thing I don't like about Ridgid circular saws is there put the grip on the motor housing instead of in front of the main grip like Mikita. The advantages is you can hold the blade guard open without having to stretch your hand when doing a plunge cut.
Since he didnt tell us in this video how many cuts with the brushed model, it was 234 cuts on 2x4s and 85 cuts on the 7/16 OSB. thats 18%-25% increase in run time.
Ok, 312 2x4 cuts and 99 7/16" OSB cuts, but how many cuts does the non-brushless do? Would be a better comparison if you include what other saws have done.
Great video but I agree it is missing a summary comparison at the end with others model. As I'm looking to get the brush model combo and not sure the brushless worth the extra price.
Maybe I missed it but how is the torque compared to the brushed model? Does the new motor add torque or just runtime? My complaint with the old brushed model is that it bogs down too easily in tough wood.
Wow my dewalt 18 v can only get about six cuts of the 2x4 and on 1/2 ply about three. The older 18v batteries that I have suck compared to most newer types. Hey Daniel the young buck doing all the cutting is that your dad ? Awesome 👍👍
Great review of the saw! I had been hesitant to pick up the kit because of reviews of past cordless saws, but the run time testing and regular blade capacity is very convincing. This type of saw is perfect for what I am planning on using it for, laminate flooring installation. Lots of cuts with no cord on the floor to get in the way of the project. I do have one question, since you were wearing hearing protection, what is the noise level vs a quality corded model?
Approximately how many feet of pressure treated 2x material can the saw rip cut on a 5 amp hour batter? On my Gen 4 it would kill a 3 Amp hour on only 8 feet of ripe. I cut wanted to compare to my old gen 4.
I've had 2 of these for the last 3 yrs. Im not a big fan. They always bog down on me when Im cutting lumber. I basically only use them for cutting pvc or vinyl.
Thank you so much for taking the time to review these products. I have a questions for everyone... Which cordless circular saw is the all around best 7 1/4 circular saw? I'm trying to decide which to get. I have the Ridgid impact driver and drill, but I'm considering changing over to Makita or Milwaukee, so that I can have all my tools using the same batteries. Which would you guys purchase or stay away from? Thanks in advance, I'm looking forward to the responses.
I have been a bosch guy all my pro life. They used to make very quality cordless tools but they are junk now. According to most reviews makita is best, then milwaukee, ridgid and dewalt similar. I switched to ridgid because they are the best for the price and they have come leaps and bounds compared to their old products. Plus you cant beat theyre warranty
I'd be hesitant to label any one of the top tool brands as the "best." Each has their advantages. Don't forget, the Makita 7-1/4" requires TWO 18V batteries to run, while all other manufacturers have made do with only one. That means more power for the Makita, but it will be heavier and will tie up two batteries by itself.
does it seem like the saw takes a while for it to wind up? is that normal? and why did Ridgid decrease the rpms from the gen 4 X? does this give it more torque?
Thanks a lot man. Can you confirm that this beat in runtime the M18 Fuel, but not the makita brushless 6 1/2 ? I appreciate the time you take to make those nice reviews.
+CrazyBee Yes, it beat the M18 FUEL. The Makita is in a league of it's own......UNREAL speed. Keep in mind though, you really cant compare (fairly) a 6-1/2" & a 7-1/4"......the blade is smaller = less mass = less power to turn it.
huh...does that saw have the room to take the larger battery for longer runtimes or just the slimline standard batteries that come with it? I have Milwaukee battery powered drills and drivers, the difference between the slim and the extended size batteries is a major difference!
I see that you swapped out the RIDGID blade for a DIABLO for you tests. Is the supplied RIDGID blade garbage and did the thin kerf DIABLO give you a faster, cleaner cut and improve the run-time?
I just ordered the ridgid 5 combo kit and my circ saw is a lefty... and so are all yours. Why is that? Only 10 percent of pop is left handed. And lefty saws are usually special ordered.
+Thomas tom People on the West Coast are used to wormdrive saws --- having a LH blade.......people on the East Coast are used to sidewinder saws --- having a RH blade. Personally I dont know why they dont make LH & RH models of every saw, but I guess shelf space is limited. These 7-1/4" saws (from almost every manufacturer) have the RH blade orientation.
+Kevin Newman From what I am reading online, it seems somewhere in 2016. I would imagine the saw by itself is going to be well over $100 with no batteries......the kit at Home Depot right now comes with the Hammer Drill (that I also reviewed), the saw, a charger, a 2.0ah battery & 4.0ah battery......might make sense to get the kit & sell the drill.
Thanks for the feedback. I think I've just decided to go with the Milwaukee. All of my current stuff is M18 and don't feel like have another tool system and battery system to worry about. Love the videos!
+Johnny Bautista Yes, it works on any circular saw....it is the KREG Rip Cut --- Here it is on Amazon --- www.amazon.com/gp/product/B007K5HIFS?_encoding=UTF8&tag=reatoorev-20
Why Ridgid wont import these tools to Scandinavia (or EU?) ?? We have ridgid plumbig tools only :( and the prices here... check out for example karkkainen.com ... Dewalt DW745 table saw here in Finland 800-900 euros..! and in US (homedepot.com) 299 USD !!
I framed an entire basement 1400sqft. Using only this saw for cutting studs. With 2 5amp hour batteries I was getting through the entire day of framing. It was not as powerful as a corded saw for sure but it didn't really hinder production. It did stall here and there when I tried to cut too quickly, again was used to a 15amp corded skilsaw so I had to adjust my pace a little. I would say as a carpenter/remodeler, this saw is adequate for my work. It does lack a little power, but basically every cordless saw does.
It was pretty pathetic for rip cuts through 2*4. Stalled out quite a lot unless you went very slow which was a little frustrating.
The ergonomics are good, was comfortable using it all day.
All things considered, I score it at a 8 out of 10.
@@falllshogun6622 weirdo
FYI I read some reviews on Ridgid's website and people are saying they were having issues with cutting UNTIL they replaced the free blade with a Diablo and the improvement was night & day. Then I ordered one FOR ONLY $99! Thanks for the great vids!
Your video tutorial on this Ridgid brushless hammer drill is way more educative and superior than what I saw from Tool B. Your videos are precise and are highly professionally done. They are short videos and not boring at all. You actually include a lot of scientific talk in your tutorials. You match your talking points with practicals. So much like an engineering laboratory professor. I discovered your channel today and I have already learned a lot from you than I have learned from your competitor's junky videos. Only the Sparky Channel guy matches this level of sophistication. Because of your videos on this Ridgid brushless, I have decided to consider it a must buy this week but please answer this question for me ------ "Does tthe Ridgid Gen5X hammer drill overheat and then shut down?" Thanks a lot and God's Blessings to you.
Pretty darn impressive ! Very nice review and great to see your dad assisting.
+DC Rickerson Thanks DC! He likes helping & I am glad! :)
I'm a die hard Milwaukee guy but according to your videos rigid is deffinately making a come up
+Chris Cape I agree! Thanks!
+Chris Cape I use Milwaukee at work, and have bought these brushless ridgid tools (drill, impact and circular saw) for my personal use. They are the poor man's equivalent of m18 fuel. They are that good. Especially with the larger 4.0 and 5.0 batteries.
Excellent Review.
Your review is better than the Manual the Saw comes with.
I learned a lot from this post
Better video than Ridgid own
Your review was excellent. Clear, concise and provides me a reason for buying this saw. I appreciate your review. Keep it up!!
I have a regular and brushless both. Customers also ask for both. Thank you for the explanation.
All these Ridgid Gen5X tools are very impressive. Great review.
Got this brushless have both and I love it and have the brushed gen 5x kit but I wanted a brushless model too and just today they accepted my lifetime service agreement so thanks ridgid great review
Got one a week or so ago, but didn't have a chance to use it other than a very few end cuts. Yesterday at the job site, my corded circular saw which we were using to cut Richlite, bit the dust(so to speak). Using a new Dewalt 30 tooth general construction blade, started cutting and was blown away by the power. The battery didn't last though, but in fairness, as i've said, i'd used it a few times prior, so it wasn't a fair test, and i have plenty of battery's anyway(though it comes with the 4.0 amp hour battery if you get the full kit, which is worth it, for sure)as i use and love the Stealth Driver they make. For those not familiar with Richlite, it is paper impregnated with resin, used for counter tops, etc. It's super dense, very heavy, and the manufacturer insist that only a festool track saw should be used to cut it(heavy sigh). We were only sizing the material for handling and will make our real cuts next week once we can get back in the building. The real test will be then, and i most likely will be using a different blade. So far, my only complaint is the safety lock, it's hard for my arthritic hands, and the depth release lever(gauge is awesome and accurate)being on the motor side, and not between the blade and motor(which may just take some getting use to). It's also not light, though lighter than their corded model. Great review, thanks for it.
I love how the dog does not even care you are there. Good review.
+NICK PAUL Haha...yeah, dogs that are scared of noise wouldnt like living here too much :)
One thing I don't like about Ridgid circular saws is there put the grip on the motor housing instead of in front of the main grip like Mikita. The advantages is you can hold the blade guard open without having to stretch your hand when doing a plunge cut.
Super review! very detailed thank you, loved how you explained the different features and how to use them.!!
That is amazing run time!
Great video! Please show how you install the blades.
Since he didnt tell us in this video how many cuts with the brushed model, it was 234 cuts on 2x4s and 85 cuts on the 7/16 OSB. thats 18%-25% increase in run time.
Ok, 312 2x4 cuts and 99 7/16" OSB cuts, but how many cuts does the non-brushless do? Would be a better comparison if you include what other saws have done.
Great video but I agree it is missing a summary comparison at the end with others model. As I'm looking to get the brush model combo and not sure the brushless worth the extra price.
ruclips.net/video/-HbwTUHEhzU/видео.html
Maybe I missed it but how is the torque compared to the brushed model? Does the new motor add torque or just runtime? My complaint with the old brushed model is that it bogs down too easily in tough wood.
Wow my dewalt 18 v can only get about six cuts of the 2x4 and on 1/2 ply about three. The older 18v batteries that I have suck compared to most newer types. Hey Daniel the young buck doing all the cutting is that your dad ? Awesome 👍👍
+Steve Rob Thanks Steve! The runtimes seems to constantly be improving! And yes, that is my dad :)
Great review of the saw! I had been hesitant to pick up the kit because of reviews of past cordless saws, but the run time testing and regular blade capacity is very convincing. This type of saw is perfect for what I am planning on using it for, laminate flooring installation. Lots of cuts with no cord on the floor to get in the way of the project. I do have one question, since you were wearing hearing protection, what is the noise level vs a quality corded model?
Approximately how many feet of pressure treated 2x material can the saw rip cut on a 5 amp hour batter? On my Gen 4 it would kill a 3 Amp hour on only 8 feet of ripe. I cut wanted to compare to my old gen 4.
so can this saw use the new .60 octane battery?? thinking it could cut 500 plus cuts on one charge...saw may also have even more torque imo...
I've had 2 of these for the last 3 yrs. Im not a big fan. They always bog down on me when Im cutting lumber. I basically only use them for cutting pvc or vinyl.
Thank you so much for taking the time to review these products. I have a questions for everyone... Which cordless circular saw is the all around best 7 1/4 circular saw? I'm trying to decide which to get. I have the Ridgid impact driver and drill, but I'm considering changing over to Makita or Milwaukee, so that I can have all my tools using the same batteries. Which would you guys purchase or stay away from? Thanks in advance, I'm looking forward to the responses.
I have been a bosch guy all my pro life. They used to make very quality cordless tools but they are junk now. According to most reviews makita is best, then milwaukee, ridgid and dewalt similar. I switched to ridgid because they are the best for the price and they have come leaps and bounds compared to their old products. Plus you cant beat theyre warranty
I'd be hesitant to label any one of the top tool brands as the "best." Each has their advantages. Don't forget, the Makita 7-1/4" requires TWO 18V batteries to run, while all other manufacturers have made do with only one. That means more power for the Makita, but it will be heavier and will tie up two batteries by itself.
how to adjust the guide to blade cut line. I found it to be off and the cut line isn't where it shows on the guide before the 0mm
Can you use the 18v batteries that come with the drill for this saw? If so is that the same battery your using in the video?
does it seem like the saw takes a while for it to wind up? is that normal? and why did Ridgid decrease the rpms from the gen 4 X? does this give it more torque?
If I am reading the numbers correctly:
2x4's on R8652 vs M18 fuel vs R8653: 234 vs 231 vs 312
7/16th on R8652 vs M18 fuel vs R8653: 85 vs 71 vs 99
+noname Yes, but the M18 FUEL got 233 cuts, not 231
Thanks a lot man. Can you confirm that this beat in runtime the M18 Fuel, but not the makita brushless 6 1/2 ? I appreciate the time you take to make those nice reviews.
+CrazyBee Yes, it beat the M18 FUEL. The Makita is in a league of it's own......UNREAL speed. Keep in mind though, you really cant compare (fairly) a 6-1/2" & a 7-1/4"......the blade is smaller = less mass = less power to turn it.
Ur videos are awesome dude
can you charge new .60 octane size battery with standard fast charger? how long is charge time? thanks
What saw guide is used to cut plywood? Thanks
huh...does that saw have the room to take the larger battery for longer runtimes or just the slimline standard batteries that come with it? I have Milwaukee battery powered drills and drivers, the difference between the slim and the extended size batteries is a major difference!
+glocknutmike Ooops...the 4a batt is the large size. Sorry.
+glocknutmike No problem :)
What is the name of the adapter you was using. Looks very useful
+Enrique Phoenix It was the KREG Rip-Cut.
how many cuts outta oak or maple will it do?
Good job , keep up the good work
+Zack Ala Thanks Zack!
Dear Friend, have this version, like mine brushed, problem with blades regulation screw
The knob is for nothig good
Ridgid or aeg are the same? Because I have battery 4ah aeg if this compatible to ridgid circular saw? Tnk u
Nice review whats the comparition vs, the gen5 brushed?
+David Marquez (Tiempo Radical) Runtime difference is 234 vs 312 on the 2x4s.......85 vs 99 on the plywood.
What kind of guide were you using on your circular saw ?
I see that you swapped out the RIDGID blade for a DIABLO for you tests. Is the supplied RIDGID blade garbage and did the thin kerf DIABLO give you a faster, cleaner cut and improve the run-time?
I just ordered the ridgid 5 combo kit and my circ saw is a lefty... and so are all yours. Why is that? Only 10 percent of pop is left handed. And lefty saws are usually special ordered.
+Thomas tom People on the West Coast are used to wormdrive saws --- having a LH blade.......people on the East Coast are used to sidewinder saws --- having a RH blade. Personally I dont know why they dont make LH & RH models of every saw, but I guess shelf space is limited. These 7-1/4" saws (from almost every manufacturer) have the RH blade orientation.
another great review!
+Cody Robertson Thanks Cody!
Any idea when it can be bought outside a kit? I don't need another drill.
+Kevin Newman From what I am reading online, it seems somewhere in 2016. I would imagine the saw by itself is going to be well over $100 with no batteries......the kit at Home Depot right now comes with the Hammer Drill (that I also reviewed), the saw, a charger, a 2.0ah battery & 4.0ah battery......might make sense to get the kit & sell the drill.
Thanks for the feedback. I think I've just decided to go with the Milwaukee. All of my current stuff is M18 and don't feel like have another tool system and battery system to worry about. Love the videos!
Thank you.. Very helpful.
were can i get one of those blaze guides like the one your using? (minutes8:29) on the video and would it work on any cordless saw?? thanks
+Johnny Bautista Yes, it works on any circular saw....it is the KREG Rip Cut --- Here it is on Amazon --- www.amazon.com/gp/product/B007K5HIFS?_encoding=UTF8&tag=reatoorev-20
Thanks i just bought it
What was the attachment when cutting the osb?
rusco321 Kreg rip cut ;)
Great
Dope video
+MP 10000 $ Thanks!
Can you attach a dust collector to this circular saw?
No, unfortunately there's not a dust port. Although I'm not aware of any circular saws other than track saws that have a dust port.
hi I want to buy this circular saw and its possible I use transformer to charge the battery because here in Kuwait we use 220 volt
Yes. You would need a transformer to plug the charger into....other than that, it would work fine.
+Real Tool Reviews ok thanks for information...I want to buy this ridgid circular saw....you will recommend it?
Ervin Bernardo it's called AEG outside the US, it should have the appropriate charger out of the box
For metal cutting?
cheng晴 my boss uses it for metal stair rails, works great.
Nice saw.
+BADD400 CB700 drums Thanks! I agree!
anyone knows if the official charger me in Spain ? we 230v power at home . thank you very much
the 230v version in Europe is AEG branded
@@flamzart Hi, can I use AEG branded charger to charge Ridgid batteries? They look very same.
Nice job
+George S Thanks George!
Why Ridgid wont import these tools to Scandinavia (or EU?) ?? We have ridgid plumbig tools only :( and the prices here... check out for example karkkainen.com ... Dewalt DW745 table saw here in Finland 800-900 euros..! and in US (homedepot.com) 299 USD !!
+Dimepag Barrell Thank your country's govt for high import duties & taxes.
Dimepag Barrell look up AEG Tools, they're just ridgid tools with an unlicensed name
How do you know when a saws battery is done cutting?
When you pull the trigger it will not spin.
Laser?
No cordless circular saws have lasers....only LED lights
Real Tool Reviews i know this video is old but Ryobi 5.5" circular saw has a laser
thanks for your video.
I want buy for Thai Land
🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔
damn rigid is getting awful close to competing with Milwaukee and dewalt
+Chris Cape Actually....this beat the M18 FUEL Circular Saw by a lot......231 vs 312 cuts on the 2x4s......71 vs 99 on the OSB.